Helmet VESPA VJ type II Matt / Glossy Black (double visor)
Article information
Vespa helmet, light and resistant ABS shell, equipped with a chin strap with micrometric closure and a retractable sun visor. A helmet from the incomparable Vespa line! This special edition has a matte black shell with rubber edge. The visor brackets are made of carbon and a bright fluorescent colored band runs centrally over the helmet that reflects the details of the visor mechanisms. The entire VJ range has a removable microfibre lining with hypoallergenic treatment and an easy to use sun visor.
Fits in the VESPA GTS helmet compartment from model year 2014
ECE approval 22.05. Size XS / 54 - S / 56 - M / 58 - L / 60 - XL / 61.
Collection 2020
Polycarbonate shell
A polycarbonate outer shell is relatively cheap to produce, which makes the helmets affordable. The helmet is produced by using a mould where the material is poured and compressed. By using plasticizers, the plastic becomes elastic. Through exposure to UV-light and various weather conditions, these plasticisers deteriorate. This means that a polycarbonate helmet should be replaced after approximately 5 years.Perimetrical rim
The outer shell is finished with a plastic rim. This not only provides a neat finish but also offers protection to the outer shell. If the helmet is dropped on the ground, it is not immediately damaged.Integrated sun visor
The integrated sun visor is easy to use. By pulling the lever of the visor, the visor comes down. This way, you don't have to wear sunglasses on sunny days. The sun visor blocks most of the sun's rays and can be combined with sunglasses. When it gets too dark, you can easily pull the visor up again and use the transparent visor.Removable inner lining
The inner lining is attached to the inner shell by snaps or velcro. The removable inner lining can be washed with neutral soap. In this way, the lining remains in good quality and the helmet fresh. In addition to the inner lining, the cheek pads are also removable.Perforated inner lining
The ventilation system in the helmet ensures a constant air flow. Through the perforated inner lining, this air, which enters through the air channels, can also reach the skin. This way it always stays cool inside the helmet. In winter, the ventilation system can be closed so no air enters the helmet.Micrometric buckle
The micrometric buckle is the most frequently used buckle on helmets and easy to use. The rattle buckle ensures that it can be adjusted to the correct position. The buckle is easily opened by pulling the red loop.Sizes XS-S-M-L-XL
The size of the helmet is determined by the number of centimeters of head circumference. The size is measured with a measuring tape above the ears along the widest part of the head. The number of centimeters determines the size. The sizes are however an indication. This is no guarantee that the helmet will fit. Check per brand how the size is calculated.Click here to determine your helmet size.
ECE 22-05 certification
If you want to participate in traffic on a moped, scooter or motorbike in Europe you are obliged to wear a helmet with the ECE certification. This certification meet of a number of minimum requirements that a helmet must pass. The ECE certification can be found on the label attached to the chinstrap.Specifications
Size | : | M / 57-58cm |
Type | : | Demi Jet |
Color | : | Black |
Collection | : | VJ |
Fits
Helmet VESPA VJ type II Matt / Glossy Black (double visor) fits the following vehicles:Additional products
Recommended products
Spare parts