LITD - BIS

PROGRAMME OF WORK 

(AS ON 16 OCTOBER 2006) 

LITD 

Electronics & Information Technology Department 

(LITD) 

B U R E A U O F I N D I A N S T A N D A R D S 

MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG 

NEW DELHI - 110002

PREFACE 

A programme of work is prepared every year for each Division of Bureau of Indian Standards to 

indicate the latest position of published Indian Standards and draft standards at different stages of 

processing. This programme of work for Electronics and Information Technology Division Council 

(LITDC) has been prepared Sectional Committee-wise as on 16 Oct. 2006 and arranged in the 

sequential order of the Committee Number. 

The scope of LITDC is as under: 

“Standardization in the field of electronics and Information Technology”. 

In the programme of work an asterisk mark (*) given before a printed standard indicates that the 

standard is under revision and its relevant document is available at different stages of processing; 

whereas, double asterisk mark (**) indicates standard identified for revision for which document is 

yet to be prepared. Below the designation of a published standard, wherever `/ISO/IEC.......’ 

standard number is given, it implies that the Indian Standard is the total adoption of ISO/IEC 

standard under dual numbering scheme. (The designations such as IS/ISO 9001:2000 also indicate 

dual number standards). Below the designation of a published standard, wherever `| 

ISO/IEC........’ standard number is given, it implies that the Indian Standard is technically equivalent 

to ISO/IEC standard. 

It is hoped that this publication will provide the community of standards users a convenient tool for 

obtaining the latest information about new and upcoming standards in the field of Electronics and 

Information Technology. 

For further information, please write to: 

Scientist ‘F’ & Head (Electronics and Information Technology) 

Bureau of Indian Standards 

Manak Bhavan, 

9 Bahadur Shah Zafar Marg 

New Delhi - 110002. 

E-mail: litd@bis.org.in 

hlitd@bis.org.in.

C O N T E N T S 

COMMITTEE WISE POSITION OF WORK OF ELECTRONICS AND INFORMATION 

TECHNOLOGY DIVISION COUNCIL (LITDC) 

Sl.No. Designation Title: (Corresponding IEC/ISO TC/SC) Page Number 

1. LITD 01 ENVIRONMENTAL TESTING PROCEDURE 1-8 

(Earlier LTD 02) SECTIONAL COMMITTEE: IEC/TC 89 &104 

2. LITD 02 RELIABILITY OF ELECTRONIC AND 9-11 

(Earlier LTD 03) ELECTRICAL COMPONENTS AND EQUIPMENT 

SECTIONAL COMMITTEE : IEC/TC 56 

3. LITD 03 ELECTROMECHANICAL COMPONENTS AND 12-21 

(Earlier LTD 07) MECHANICAL STRUCTURES FOR ELECTRONIC 

EQUIPMENT SECTIONAL COMMITTEE: IEC/TC 48 

IEC/SC 48B , 48D & 46F 

4. LITD 04 ELECTRON TUBES AND DISPLAY DEVICES 22-24 

(Earlier LTD 09) SECTIONAL COMMITTEE : IEC/TC 39 & 110 

5. LITD 05 SEMICONDUCTOR AND OTHER ELECTRONIC 25-55 

COMPONENTS AND DEVICES SECTIONAL 

COMMITTEE (Earlier LTD 10, LTD 12, LTD 13, 

LTD 14, LTD 17 MERGED TO FORM LITD 05): 

IEC/TC 40, 47,49,51 & 91 IEC/SC 47A,47D & 47E 

6. LITD 06 WIRES, CABLES, WAVEGUIDES AND 56-61 

(Earlier LTD 18) ACCESSORIES SECTIONAL COMMITTEE: 

IEC/TC 46, IEC/SC 46A,46C & 46F 

7. LITD 07 AUDIO, VIDEO AND MULTIMEDIA SYSTEMS 62-71 

(Earlier LTD 20) AND EQUIPMENT SECTIONAL COMMITTEE : 

IEC/TC 29, 100 & 108 

8. LITD 08 ELECTRONIC MEASURING INSTRUMENTS, 72-78 

(Earlier LTD 21) SYSTEMS AND ACCESSORIES 

SECTIONAL COMMITTEE: IEC/TC 85 & 45, 

IEC/SC 45A & 45B, ISO/TC 85,ISO/TC 85/ SC 2 & 5

Sl.No. Designation Title: (Corresponding IEC/ISO TC/SC) Page Number 

9. LITD 09 ELECTROMAGNETIC COMPATIBILITY 79-83 

(Earlier LTD 22) SECTIONAL COMMITTEE : IEC/TC 106 & 77 

IEC/SC 77A, 77B & 77C, CISPR 

10. LITD 10 POWER SYSTEM CONTROL AND 84-85 

(Earlier LTD 25) ASSOCIATED COMMUNICATIONS 

SECTIONAL COMMITTEE: IEC/TC 57 

11. LITD 11 FIBRE OPTICS, FIBERS, CABLES AND DEVICES 86-87 

(Earlier LTD 27) SECTIONAL COMMITTEE : IEC/TC 86-SC 86A, 86B & 86C 

12. LITD 12 TRANSMITTING EQUIPMENT FOR RADIO 88-90 

(Earlier LTD 20) COMMUNICATION SECTIONAL COMMITTEE: 

IEC/TC 103 

13. LITD 13 INFORMATION AND COMMUNICATION 91-92 

(Earlier LTD 28) TECHNOLOGIES SECTIONAL COMMITTEE: 

ISO/IEC/JTC 1/SC 6, 25 & 35 

14. LITD 14 SOFTWARE AND SYSTEM ENGINEERING 93-96 

(Earlier LTD 33) SECTIONAL COMMITTEE: ISO/IEC/JTC1/SC 7, 22 & 29 

15. LITD 15 DATA MANAGEMENT SYSTEM 97 

SECTIONAL COMMITTEE:ISO/IEC/JTC1/SC 24, 31,32 & 34 

16. LITD 16 COMPUTER HARDWARE, PERIPHERALS AND 98-102 

(Earlier LTD 37) IDENTIFICATION CARDS SECTIONAL COMMITTEE : 

IEC/TC 108, ISO/IEC/JTC1-SC 17, 23 & 28 

17. LITD 17 INFORMATION SYSTEMS SECURITY 103-104 

(Earlier LTD 38) AND BIOMETRICS SECTIONAL COMMITTEE: 

JTC1- SC 27, 17 & 37 

18. LITD 18 E-GOVERNANCE SECTIONAL COMMITTEE 105 

19. LITD 19 E-LEARNING SECTIONAL COMMITTEE 106 

20. LITD 20 INDIAN LANGUAGE TECHNOLOGIES AND 107 

PRODUCTS SECTIONAL COMMITTEE: 

ISO/IEC/JTC1/SC 2 

21. LITD 21 E-BUSINESS INFRASTRUCTURE 108 

SECTIONAL COMMITTEE

22. ANNEX A STANDARDS WITHDRAWN/SUPERSEDED 109-118 

23. ANNEX B LIST OF LICENCES 119 

24. ANNEX C BILINGUAL STANDARDS 120

STATISTICS AT A GLANCE 

ASPECTWISE POSITION OF STANDARDS 

ASPECT OF STANDARD 

NUMBER OF 

STANDARDS 

PRODUCT STANDARDS : 461 

METHODS OF TEST : 286 

CODES OF PRACTICE : 136 

TERMINOLOGY : 85 

DIMENSIONS : 125 

SYMBOLS : 17 

OTHERS : 361 

TOTAL : 1471 

HARMONIZATION POSITION 

TYPE OF HARMONIZATION 

NUMBER OF STANDARDS 

IS UNDER DUAL NO. : 409 

IS TECHNICALLY EQUIVALENT TO 

IEC/ISO : 578 

TOTAL : 987

LITD 1 ENVIRONMENTAL TESTING PROCEDURES 

SCOPE - To prepare Indian Standards on climatic and mechanical durability of electronic 

components and equipments 

CORRESPONDING IEC/ISO COMMITTEES: 

IEC/TC 89 Fire Hazard Testing 

IEC/TC 104 Environmental conditions, Classification and Testing 

Sl. No. IS Number/ DOC Number Title Reaffirm No. of 

STANDARDS PUBLISHED 

Date Amd. 

1 IS 1885(Part 84):2001 Electrotechnical vocabulary (Part 84): Fire tests Jan 2004 

/ IEC 60695-4(1993) 

2 IS 9000(Part 1):1988 Basic environmental testing procedures for electronic Sep 2004 

| IEC 60068-1:1982 and electrical items: Part 1 General (first revision) 

3 IS 9000(Part 2/Sec 1):1977 Basic environmental testing procdures for electronic and Sep 2004 

| IEC 60068-2-1(1974) electrical items: Part2 Cold test, Sec 1 General 

4 IS 9000(Part 2/Sec 2):1977 Basic environmental testing procedures for electronic Sep 2004 

| IEC 60068-2-1(1974) and electrical items: Part 2 Cold test, Sec 2 Cold test 

for non-heat dissipating items with sudden change of 

temperature 



for non-heat dissipating items with gradual change of 

temperature 



for non-heat dissipating items with gradual change of 

temperature 


| IEC 60068-2-2(1974) and electrical items: Part 3 Dry heat test, Sec 1 General 


| IEC 60068-2-2(1974) and electrical items: Part 3 Dry heat test, Sec 2 Dry 

heat test for non-heat dissipating items with sudden 

change of temperature 



heat test for non-heat dissipating items with gradual 

change of temperature 



heat test for heat dissipating items with sudden change 

of temperature 



heat test for heat dissipating items with gradual change 

of temperature 


| IEC 60068-2-3(1969) and electrical items: Part 4 Damp heat (steady state) 

* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED 

/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS

13 IS 9000(Part 5/Sec 1):1981 

| IEC 60068-2-30(1980) 

Basic environmental testing procedures for electronic 

and electrical items: Part 5 Damp heat (cyclic) test, Sec 

Sep 2004 

1 16 + 8h cycle 

14 IS 9000(Part 5/Sec 2):1981 

| IEC 60068-2-30(1980) 


and electrical items: Part 5 Damp heat (cyclic) test, Sec 

Sep 2004 

2 12 + 12h cycle 


| IEC 60068-2-38(1974) and electrical items: Part 6 Composite 

temperature/humidity cyclic test 

16 IS 9000(Part 7/Sec 1):2006 

/ IEC 60068-2-27(1987) 


and electrical items: Part 7 Impact test Section 1 Shock 

(Test Ea) (First Revision) 


| IEC 60068-2-29(1968) and electrical items: Part 7 Impact test, Sec 2 Bump 


| IEC 60068-2-31(1969) and electrical items: Part 7 Impact test, Sec 3 Drop and 

topple 


| IEC 60068-2-32(1975) and electrical items: Part 7 Impact test, Sec 4 Free fall 


| IEC 60068-2-32(1975) and electrical items: Part 7 Impact test, Sec 5 Free fall, 

repeated 

21 IS 9000(Part 7/Sec 6):1988 Basic environmental testing procedures for electronic Jan 2006 

| IEC 60068-2-55(1987) and electrical items: Part 7 Impact test, Section 6 Test 

Ee: Bounce 

22 IS 9000(Part 7/Sec 7):2006 

/ IEC 60068-2-75(1997) 

Basic environmental tersting procedures for electronic 

and electrical items: Part 7: Test Impact ,Sec 7 Test Eh: 

Hammer tests 

23 IS 9000(Part 8):1981 Basic environmental testing procedures for electronic Jan 2006 

| IEC 60068-2-6(1970) and electrical items: Part 8 Vibration (sinusoidal) test 


| IEC 60068-2-7(1968) and electrical items: Part 9 Acceleration (steady state) 


| IEC 60068-2-10(1968) and electrical items: Part 10 Mould growth test 


| IEC 60068-2-11(1964) and electrical items: Part 11 Salt mist test 


| JSS-55555 and electrical items: Part 12 Dust test 


| IEC 60068-2-13(1966) and electrical items: Part 13 Low air pressure test 


| IEC 60068-2-14(1984) and electrical items:Pt 14 Test N:Change of temp., Sec 

1 Test Na: Rapid change of temperature(thermal 

shock)with prescribed time of Transition-Two chamber 

method(first revision) 




| IEC 60068-2-14(1984) and electrical items:Part14 Test N:Change of 

temperature,Sec 2 Test Nc:Change of 

temperature(temperatureCycling)with specified rate of 

change-One chamber method(first revision 


| IEC 60068-2-14(1984) and electrical items:Part14 Test N: Change of 

temperature, Sec 3 Test Nc: Rapid Change of 

temperature (thermal Shock) - Two fluid bath method 

(first revision) 


| IEC 60068-2-17(1978) and electrical items: Part 15 Sealing test, Sec 1 General 

33 IS 9000(Part 15/Sec 2):1982 

| IEC 60068-2-17(1978) 

Basic environmental testing procedures for electronic Sep 2004 

and electrical items: Part 15 Sealing test, Sec 2 Sealing 

of bushes, spindles & gaskets 

34 IS 9000(Part 15/Sec 3):1982 Basic environmental testing procedures or electronic & Sep 2004 

| IEC 60068-2-17(1978) electrical items: Part15 Sealing test, Sec 3 Container 

sealing gas leakage 


| IEC 60068-2-17(1978) and electrical items: Part 15 Sealing test, Sec 4 

Container sealing, seepage filling liquid 



Sealing-tracer gas (helium) method with mass 

spectrometer 


| IEC 60068-2-17(1978) and electrical items:Part15 Sealing test, Sec 6 Bomb 

pressure test 



Immersion test 



Sealing-radioactive tracer gas (Krypton) method 



Sealing-test for equipment 


| JSS-55555 and electrical items : Part 16 Driving rain test 


| IEC 60068-2-5(1975) and electrical items: Part 17 Radiation test (first revision) 

43 IS 9000(Part 18/Sec 1):1981 Basic environmental testing procedures for electronic 

| IEC 60068-2-20(1979) and electrical items:Part18 Solderability test, Sec 1 

Jan 2006 1 

Solderability of wire and tag terminations 


| IEC 60068-2-20(1979) and electrical items: Part 18 Solderability test, Sec 2 

Jan 2006 1 

Resistance of items to soldering test 




| IEC 60068-2-20(1979) and electrical items: Part 18 Solderability test, Sec 3 

Jan 2006 1 

Solderability of printed boards and metal-clad laminates 


| IEC 60068-2-21(1983) and electrical items: Part 19 Test U: Robustness of 

terminations and integral mounting devices, Sec 1 Test 

Ua1: Tensile (first revision) 




Ua: Thrust (first revision) 




Ub: Bending (first revision) 




Uc: Torsion (first revision) 




Ud : Torque (first revision) 


| IEC Doc 50 C(CO) 19 and electrical items: Part 20 Resistance to cleaning 

solvents and permanence of markings 

52 IS 9000(Part 21):1985 Basic environmental testing procedures for electronic & Sep 2004 

| JSS-55555-1977 electrical items: Part21 Acoustics noise test 


| JSS-55555-1977 and electrical items: Part 22 Fine mist test 


| JSS-55555-1977 and electrical items: Part 23 Drip proof test 

55 IS 9000(Part 25):1985 

| IEC 60068-2-43(1976) 

Basic environmental testing procedures for electronic Jan 2006 

and electrical items: Part 25 Hydrogen sulphide test for 

contacts and connections 

56 IS 9000(Part 26):1980 

| IEC 60068-2-42(1976) 

Basic environmental testing procedures for electronic & 

electrical items: Part26 Sulphur dioxide test for contacts 

Jan 2006 

and connections 


| IEC 60653(1979) and electrical items: Part 27 Ultrasonic cleaning test 


| IEC 60068-2-40(1976) and electrical items: Part 31 Combined cold/low air 

pressure tests 

59 IS 9000(Part 32):2006 

/ IEC 60068-4(1987) 

Basic environmental testing procedures for electronics 

and electrical items Part 32: Information for specification 

writers- Test summaries 

60 IS 9001(Part 1):1984 Guidance for environmental testing: Part 1 General Sep 2004 

| IEC 60068-1(1982) 



61 IS 9001(Part 2):1977 Guidance for environmental testing:Part 2 Cold and dry Sep 2004 

| IEC 60068-3-1(1974) heat tests 

62 IS 9001(Part 3):1978 Guidance for environmental testing: Part 3 Change of Sep 2004 

| IEC 60068-2-33(1971) temperature 

63 IS 9001(Part 4):1979 Guidance for environmental testing: Part 4 Damp heat Sep 2004 

| IEC 60068-2-28 tests 

64 IS 9001(Part 5):1979 Guidance for environmental testing: Part 5 Resistance to Sep 2004 

| IEC Doc 50C (co) 19 cleaning solvents and permanence of markings 

65 IS 9001(Part 6):1980 Guidance for environmental testing: Part 6 Hydrogen Sep 2004 

| IEC 60068-2-43 sulphide test for contacts and connections 

66 IS 9001(Part 7):1980 Guidance for environmental testing: Part 7 Sulphur Sep 2004 

| IEC 60068-2-42 dioxide test for contacts and connections 

67 IS 9001(Part 8):1982 Guidance for environmental testing: Part 8 Sealing test Sep 2004 

| IEC 60068-2-17(1978) 

68 IS 9001(Part 9):1981 Guidance for environmental testing: Part 9 Solderability Jan 2006 

| IEC 60068-2-20(1979) and resistance to soldering heat 

69 IS 9001(Part 10):1975 Guidance for environmental testing: Part 10 Mould Sep 2004 

| IEC 60068-2-10(1968) growth test 

70 IS 9001(Part 11):1979 Guidance for environmental testing: Part 11 Solder Sep 2004 

| IEC Doc 50 (co) 171 radiation test 

71 IS 9001(Part 12):1979 Guidance for environmental testing: Part 12 Mounting of Sep 2004 

| IEC Doc50A (co) 141 electronic and electrical items for dynamic tests 

72 IS 9001(Part 13):1981 Guidance for environmental testing: Part 13 Vibration Jan 2006 

| IEC 60068-2-6(1970) (sinusoidal) test 

73 IS 9001(Part 14):1981 

| IEC Doc50B (co) 222 

Guidance for environmental testing: Part 14 Storage tests Jan 2006 

74 IS 9001(Part 15):1984 

| IEC 60068-2-7(1968) 

Guidance for environmental testing: Part 15 Acceleration Sep 2004 

(steady state) test 

75 IS 9001(Part 16):1985 Guidance for environmental testing: Part 16 Acoustic Sep 2004 

| JSS-55555-1977 noise test 

76 IS 9001(Part 17/Sec 1):2000 Guidance for environmental testing: Part 17 Impact test, Jan 2004 

| IEC 60068-2-27(1987) Sec 1 Shock test (First revision) 

77 IS 9001(Part 17/Sec 2):1985 Guidance for environmental testing: Part 17 Impact test, Sep 2004 

| IEC 60068-2-29(1968) Section 2 Bump test 


| IEC 60068-2-31(1969) Sec 3 Drop and topple test 


| IEC 60068-2-32(1975) Sec 4 Free fall test 


| IEC 60068-2-55(1987) Sec 5 Bounce 

81 IS 9001(Part 18):1986 Guidance for environmental testing: Part 18 Ultrasonic Sep 2004 

| IEC 60653(1979) cleaning test 



82 IS 9001(Part 19):2006 Guidance for environmental testing: Part 19 Salt mist 

test 

83 IS 9002(Part 1):1977 Equipment for environmental tests for electronic and Sep 2004 

electrical items: Part 1 Chamber for cold test 


electrical items: Part 2 Chamber for dry heat test 


electrical items: Part 3 humidity chamber 


electrical items: Part 4 Chamber for mould growth test 


electrical items: Part 5 Equipment for vibration 

(sinusoidal) test 


| IEC 60260(1968) electrical items: Part 6 Constant relative humidity 

chamber (non-injection type) 


electrical items: Part 7 Bump test machine 

90 IS 9002(Part 8):1984 Equipment for environmental tests for electronic and Sep 2004 1 

electrical items: Part 8 Dust chamber 


electrical items: Part 9 Acceleration (steady state) test 

machine 

92 IS 9002(Part 10/Sec 1):1985 Equipment for environmental tests for electronic and Sep 2004 

electrical items: Part 10 Shock test machine,Sec 1 Free 

fall type 


electrical items: Part 11 Drop/toppling and free fall test 

machine (platform) 


electrical items: Part 12 Salt mist/fine mist chamber 


electrical items: Part 13 Equipment for change of 

temperature test, Sec 1 Two chamber system 


electrical items: Part 13 Equipment for change of 

temperature test, Sec 3 Two baths 


electrical items: Part 14 Low air pressure chamber 

98 IS 9002(Part 15):1988 Equipment for environmental tests for electronic and Jan 2006 

electrical items: Part 15 Low air pressure and 

temperature chamber 

99 IS 11000(Part 1/Sec 1):1988 Fire hazard testing: Part 1 Guidance for the preparation Jan 2006 

| IEC 60695-1-1(1982) of requirements and test specifications for assessing fire 

hazard of electronic and electrical items, Sec 1 General 

guidance 



100 IS 11000(Part 1/Sec 2):1988 

| IEC 60695-1-2(1982) 

Fire hazard testing : Part 1 Guidance for the preparation Jan 2006 

of requirements and test specifications for assessing fire 

hazard of electronic and electrical items,Sec 2 

Guidance for electronic components 

101 IS 11000(Part 1/Sec 3):1993 

/ IEC 60695-1-3:1986 

Fire hazard testing: Part 1 Guidance for the preparation Jan 2006 

of requirements and test specifications for assessing fire 

hazard of electronic and electrical items, Section 3 

Guidance for use of preselection procedures 

102 IS 11000(Part 2/Sec 1):1984 Fire hazard testing: Part 2 Test methods,Sec 1 Glow- Sep 2004 

/ IEC60695-2-1:1980 wire test and guidance 

103 IS 11000(Part 2/Sec 2):1984 Fire hazard testing: Part 2 Test methods,Sec 2 Needle- Sep 2004 

/ IEC 60695-2-2:1980 flame test 

104 IS 11000(Part 2/Sec 3):1994 Fire hazard testing: Part 2 Test methods, Sec 3 Bad- Jan 2006 

/ IEC 60695-2-3:1984 connection test with heaters 

105 IS 11000(Part 3/Sec 1):1993 Fire hazard testing: Part 3 Examples of fire hazard Jan 2006 

/ IEC 60695-3-1:1982 assessment procedures and interpretaton of results, 

Sec 1 Combustion characteristics and survey of test 

methods for their determination 

106 IS 13736(Part 1):1993 Classification of environmental conditions: Part 1 

/ IEC 60721-1(1990) Classification of environmental parameters and their 

Jan 2006 2 

severities 

107 IS 13736(Part 2/Sec 1):1993 Classification of environmental conditions: Part 2 Jan 2006 

/ IEC 60721-2-1:1982 Environmental conditions appearing in nature, Sec 1 

Temperature and humidity 

108 IS 13736(Part 2/Sec 2):1993 Classification of environmental conditions:Part 2 Jan 2006 

/ IEC 60721-2-2:1988 Environmental condition appearing in nature, Sec 2 

Precipitation and wind 


/ IEC 60721-2-3:1987 Environmental conditions appearing in nature, Sec 3 Air 

pressure 

110 IS 13736(Part 2/Sec 4):1993 Classification of environmental conditions, Part 2 Jan 2006 


Solar radiation and temperature 



Fauna and flora 

112 IS 13736(Part 3):1993 Classification of nevironmental conditions: Part 3 Jan 2006 

/ IEC 60721-3-0:1984 Classification of groups of environmental parameters and 

their severities, Sec 0 Introduction 

113 IS 13736(Part 3/Sec 1):1993 Classification of environmental conditions : Part 3 Jan 2006 

/ IEC 60721-3-1:1987 Classification of groups ofenvironmental parameters and 

their severities, Sec 1 Storage 

114 IS 13736(Part 3/Sec 2):1993 

/ IEC 60721-3-2:1985 

Classification of environmental conditions: Part 3 Jan 2006 

Classification of groups of environmental parameters and 

their severities, Sec 2 Transportation 



115 IS 13736(Part 3/Sec 3):1993 

/ IEC 60721-3-3:1987 



their severities, Sec 3 Stationary use at weather 

protected locations 


/ IEC 60721-3-4:1987 Classification of groups of environmental parameters 

and their severities, Sec 4 Stationary use at nonweatherprotected 

locations 

117 IS 13736(Part 3/Sec 5):1993 

/ IEC 60721-3-5:1985 



their severities, Sec 5 Ground vehicle installations 

118 IS 13736(Part 3/Sec 6):1993 

/ IEC 60721-3-6:1987 

Classification of environmental conditions:Part 3 Jan 2006 


their severities, Sec 6 Ship environment 


/ IEC 60721-3-7:1987 Classification of groups of environmental parameters and 

their severities, Sec 7 Portable and non-stationary use 

DRAFT STANDARDS ISSUED IN WIDE CIRCULATION 

1 DOC.LITD 1(25) Guide on calibration of equipment for environmental 

testing 

DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION 

1 DOC.LITD 1(8) Specification for environmental testing, Part 2: Tests- 

Test Cb: Damp heat steady state, primarily for 

equipment 

ASPECT WISE REPORT 

PRODUCT 15 

METHODS OF TEST 61 

CODES OF PRACTICES 38 

OTHERS 5 

TOTAL : 119 



LITD 2 RELIABILITY OF ELECTRONIC AND ELECTRICAL COMPONENTS AND 

EQUIPMENT 

SCOPE - Standardization in the field of availability, reliability,maintainability and 

maintenance support, in any such technological areas as may be considered 

appropriate, including those not normally dealt with by other LTD Sectional 

Committees 


IEC/TC 56 Dependability 


Date Amd. 


1 IS 1885(Part 39):1999 Electrotechnical vocabulary: Part 39 Reliability of Dec 2005 

electronic and electrical items (Second revision) 

2 IS 7354(Part 1):1975 Guide on reliability of electronic and electrical items: Dec 2005 

| IEC 60272:1968 Part 1 Preliminary reliability considerations 

3 IS 7354(Part 2):1984 Guide on reliability of electronic and electrical items: Feb 2004 

| IEC 60300 Part 2 Reliability and maintainability management (First 

revision) 


| IEC 60319:1970 Part 3 Presentation of reliability data on electronic and 

electrical components(or parts) (First revision) 


| IEC 60362:1971 Part 4 Collection of reliability,availability and 

maintainability data from field performance 

6 IS 7354(Part 5):1975 Guide on reliability of electronic and electrical items: Dec 2005 

| IEC 60419:1973 Part 5 Inclusion of lot-by-lot and periodic inspection 

procedures in specifications for electronic and electrical 

components (or parts) (First revision) 


| IEC 60409 Part 6 Inclusion of reliability clauses into specifications 

for components (or parts) (First revision) 

8 IS 7690:1975 Mathematical guide to the terms and definitions for 

| IEC 60271:1974 reliability of electronic equipment and components (or 

Dec 2005 1 

parts) used therein 

9 IS 8161(Part 1):1999 Guide for equipment reliability testing: Part 1 Principles Dec 2005 

| IEC 60605-1(1978) and procedures (First revision) 

10 IS 8161(Part 2):1986 Guide for equipment reliability testing: Part 2 Design of Feb 2004 

| IEC 60605-2 test cycles 

11 IS 8161(Part 3/Sec 1):1986 Guide for equipment reliability testing: Part 3 Preferred Feb 2004 

| IEC 60605-3 test conditions for equipment reliability testing, Sec 1 

Indoor portable equipment (low degree of simulation) 

12 IS 8161(Part 3/Sec 2):1986 Guide for equipment reliability testing: Part 3 Preferred Feb 2004 

| IEC 60605-3 test conditions for equipment reliability testing, Sec 2 

Equipment for stationary use in weather protected 

locations (high degree of simulation) 



13 IS 8161(Part 4):1985 Guide for equipment reliability testing: Part 4 Procedure Feb 2004 

| IEC 60605-4 for determining point estimates and confidence limits 

from equipment reliability determination tests 

14 IS 8161(Part 5):1981 Guide for equipment reliability testing: Part 5 Dec 2005 

| IEC 60605-5 Compliance test plans for success ratio 

15 IS 8161(Part 6/Sec 1):1983 

| IEC 60605-6(1997) 

Guide for equipment reliability testing : Part 6 Tests for Feb 2004 

validity of a constant failure rate assumption, Sec 1 Chi- 

1 

square test 

16 IS 8161(Part 6/Sec 2):1987 Guide for equipment reliability testing: Part 6 Tests for Feb 2004 

| IEC 60605-6(1997) validity of a constant failure rate assumption, Sec 2 

Kolmogorov-smirnov test 

17 IS 8161(Part 7):1977 Guide for equipment reliability testing: Part 7 Feb 2004 

| IEC 60605-7 Compliance test plans for failure rate and mean time 

between failures assuming constant failure rate 

18 IS 8161(Part 11):1983 Guide for equipment reliability testing: Part 11 Flow Feb 2004 

| IEC 60605-11 chart describing preparations for and execution of 

reliability tests 

19 IS 9185(Part 1):1979 Endurance (life) test for electronic and electrical Feb 2004 

components: Part 1 Thermal endurance 

20 IS 9185(Part 2):1979 Endurance (life) test for electronic and electrical Feb 2004 

components: Part 2 Mechanical endurance 

21 IS 9186:1979 

| IEC Doc 56(UK) 71 

Guide for screening of electronic and electrical items Feb 2004 

22 IS 9692(Part 1):1980 

| IEC Doc 56(CO) 68 

Guide on maintainability of equipment: Part 1 

Introduction to maintainability 

Feb 2004 

23 IS 9692(Part 2):1980 Guide on maintainability of equipment: Part 2 Feb 2004 

| IEC Doc 56(CO) 69 Maintainability requirements in specifications and 

contracts 

24 IS 9692(Part 3):1981 Guide on maintainability of equipment: Part 3 Dec 2005 

| IEC Doc 56(CO) 70 Maintainability programme 

25 IS 9692(Part 4):1987 Guide on maintainability of equipment: Part 4 Test and Dec 2005 

| IEC 60056(Sect) 190 diagnostic procedures 


| IEC 60056(Sect) 185 Maintainability studies during the design phase 


| MIL-STD 47A(1973) Maintainability verification 

28 IS 9692(Part 7):1984 Guide on maintainability of equipment: Part 7 Collection, Feb 2004 

| IEC 60706-3 analysis and presentation of data related to 

maintainability 

29 IS 9692(Part 8/Sec 1):1988 Guide on maintainability of equipment: Part 8 Dec 2005 

| IEC 60706-8 Maintenance and maintenance support planning, Sec 1 

General 



Maintenance support analysis 





Maintenance planning analysis 

32 IS 9692(Part 8/Sec 4):1988 

| IEC 60706-8 

Guide on maintainability of equipment: Part 8 Dec 2005 

Maintenance and maintenance supporting planning, Sec 

4 Maintenance support resources requirements 

33 IS 10139:1982 Presentation of reliability, maintainability and availability Dec 2005 

| IEC Doc 56(CO) 80 predictions 

34 IS 10673:1983 Sampling plans and procedures for inspection by Feb 2004 

| IEC 60410:1973 attributes for electronic items 

35 IS 11137(Part 2):1984 

| IEC Doc 56(CO) 85 

Analysis techniques for system reliability: Part 2 Feb 2004 

Procedures for failure mode and effects analysis (FMEA) 

and failure mode, effects and criticality analysis 

(FMECA) 

36 IS 11743:1986 Guide on human safety in design, manufacture, use and Feb 2004 

maintenance of electronic equipment 

37 IS 15036:2001 Dependability management - Application guide - Feb 2005 

| IEC 60300-3-1 Analysis techniques for dependability - Guide on 

methodology 

38 IS 15037:2002 Analysis techniques for dependability - Reliability block 

| IEC 61078(1991) diagram method 

39 IS 15038:2001 Reliability growth - Statistical test and estimation Feb 2005 

/ IEC 61164(1995) methods 

40 IS 15444(Part 1):2004 Reliability stress screening - Part 1 Repairable items 

/ IEC 61163-1 manufactured in lots 

41 IS 15444(Part 2):2005 Reliability stress screening: Part 2 Electronic 

/ IEC 61163-2(1998) components 

42 IS 15474:2004 Dependability management - Application guide - Life 

| IEC 60300-3-3 cycle costing 

43 IS 15474(Part 3/Sec 6):2005 Dependability management: Part 3 Application guide - 

/ IEC 60300-3-6(1997) Sec 6 Software aspects of dependability 

44 IS 15474(Part 3/Sec 7):2005 Dependability management: Part 3-7 Application guide - 

/ IEC 60300-3-7(1999) Reliability stress screening of electronic hardware 

45 IS 15613:2005 Software dependability through the software life-cycle 

/ IEC 61713(2000) process - Application guide 




TERMINOLOGY 1 

OTHERS 5 

TOTAL : 45 



LITD 3 ELECTROMECHANICAL COMPONENTS AND MECHANICAL STRUCTURES 

FOR ELECTRONIC EQUIPMENT 

SCOPE - To prepare Indian Standards relating to switches, relays, connectors, sockets, 

mechanical structures and similar devices (except those explicitly dealt with 

by any other committee) for use in electronic and telecommunication 

equipment 

CORRESPONDINGIEC/ISO COMMITTEES : 

IEC/SC 46F RF & Microwave Passive Components 

IEC/TC 48 Electromechanical Components and Mechanical Structures 

for Electronic Equipment 

IEC/SC 48B Connectors 

IEC/SC 48D Mechanical Structures for Electronic Equipment 



Date Amd. 

1 ISQC 960000 : 1995 Electromechanical switches for use in electronic Dec 2005 

/ IECQC 960000:1995 equipment. Part 1: Generic specification 

2 ISQC 960100 : 2000 Electromechanical Switches for use in electronic Aug 2003 

/ IECQC 960100:1991 equipment: Part 2 Sectional specification for Rotary 

switches 

3 ISQC 960101 : 2000 Electromechanical Switches for use in electronic Aug 2003 

/ IECQC 960101:1991 equipment: Part 2 Sectional specification for Rotary 

switches - Blank detail specification for Rotary switches 

4 ISQC 960300 : 1999 

/ IECQC 960300:1991 

Sectional specification for Sensitive switches Dec 2005 

5 ISQC 960400 : 1999 

/ IECQC 960400:1991 

Sectional specification for Push-button switches Dec 2005 

6 ISQC 960301 : 1999 Detail specification for One pole, unsealed subminiature Dec 2005 

/ IECQC 960301:1994 sensitive switches, 250 V max., 5 A max., electrical 

rating 

7 ISQC 960500: : 1999 Electromechanical switches for use in electronic Dec 2005 

/ IECQC960500:1999 equipment. Part 3: Sectional specification for in-line 

package switches 

8 IS 1885(Part 40):1974 Electrotechnical vocabulary: Part 40 Connectors Jan 2004 

9 IS 1885(Part 67):1988 Electrotechnical vocabulary: Part 67 Mechanical Dec 2005 

| IEC 60916(1988) structures for electronic equipment 

10 IS 2628(Part 1):1964 Rotary wafer switches (Low current rating): Part 1 Tests Dec 2005 1 

| IEC 60132-1(1962) and general requirements 

11 IS 2628(Part 2):1967 Rotary wafer switches (Low current rating): Part 2 Rotary Dec 2005 

| IEC 60132-1(1962) wafer switches with central mounting 

12 IS 2926:1964 Dimensions of connectors for radio batteries Dec 2005 

| IEC Doc 48(CO)17 

13 IS 3452(Part 1):1966 Toggle switches: Part 1 General requirements and tests Dec 2005 3 

| IEC 60131-1(1962) 



14 IS 3452(Part 2):1970 Toggle switches: Part 2 Toggle switches, Type 1 and Dec 2005 3 

| IEC 60131-2(1963) Type 2 

15 IS 3544:1966 General requirements and tests for tag strips Dec 2005 

16 IS 3720:1983 Dimensions of polarised plugs for hearing aids (first Mar 2004 

/ IEC 60090(1973) revision) 

17 IS 3826(Part 2):1970 Connectors for frequencies below 3 MHz: Part 2 Battery Dec 2005 

| IEC 60130-3:1965 connectors for electronic equipment 

18 IS 4007(Part 1):1982 Terminals for electronic equipment: Part 1 General Dec 2005 

| JSS:52710-1974 requirements and tests (first revision) 

19 IS 4007(Part 2/Sec 1):1983 Terminals for Electronic Equipment: Part 2 Detail Dec 2005 

| JSS:52710-1974 specification for terminals, Section 1 Terminal, insulated, 

with insulated captive screw cap, Type TSC 1 

20 IS 4007(Part 2/Sec 2):1983 

| JSS:52710-1974 

Terminals for Electronic Equipment: Part 2 Detail 

Specification for terminals, Section 2 Terminal, non- 

Dec 2005 

insulated, with insulated captive screw cap, Type TSC 2 

21 IS 4007(Part 2/Sec 3):1983 

| JSS:52710-1974 


specification for Terminals, Section 3 Terminal, non- 

Dec 2005 

insulated, with insulated captive screw cap, Type TSC 3 


| JSS:52710-1974 Specification for terminals, Section 4 Terminal, 

insulated, with insulated captive screw cap; Type TSC 4 



insulated, side slotted, with insulated captive screw cap, 

Type TSC 5 

24 IS 4007(Part 2/Sec 6):1983 

| JSS:52710-1974 


Specification for terminals, Section 6 Terminal, non- 

Dec 2005 

insulated, with insulated captive spring cap, tapped hole 

panel mounting, Type TSL 


| JSS:52710-1974 Specification for terminals, Section 7 Terminal, noninsulated, 

with insulated captive springg cap, Type TSL 2 



insulated, with insulated captive spring cap, Type TSL 3 

27 IS 4007(Part 2/Sec 9):1983 Terminals for electronic equipment: Part 2 Detail Dec 2005 

| JSS:52710-1974 specification for terminals, Section 9 Terminal insulated, 

with insulated captive spring cap, Type TSL 4 









30 IS 4586(Part 1/Sec 1):1987 Dimensions of spindles and mounting arrangements for Dec 2005 

| IEC60390:1972 spindle operated electronic components: Part 1 

Spindles, Sec 1 General and definitions (second revision) 


| IEC 60390:1972 spindle operated electronic components: Part 1 

Spindles, Sec 2 Plain round spindle (second revision) 



Spindles, Sec 3 Flatted spindle (second revision) 



Spindles, Sec 4 Slotted spindle (second revision) 



Spindles, Sec 5 Hollow spindle (second revision) 



Spindles, Sec 6 Coupling spindle (second revision) 



Spindles, Sec 7 Concentric spindle (second revision) 



Spindles, Sec 8 Double flatted spindle (second revision) 



Spindles, Sec 9 Knurled spindle (second revision) 

39 IS 4586(Part 1/Sec 10):1978 Dimensions of spindle and mounting arrangements for Dec 2005 


Spindles, Sec 10 Slotted and knurled spindle (first 

revision) 



Mounting arrangements, Sec 1 Components and panels 

cut-outs (first revision) 

41 IS 4586(Part 2/Sec 2):1980 Dimensions of spindle and mounting arrangements for Dec 2005 

spindle operated electronic components: Part 2 

Mounting arrangements, Sec 2 Fixing nuts (first revision) 



42 IS 4794(Part 1):1968 Push-button switches: Part 1 General requirements and Dec 2005 

| IEC 60048(CO)9 tests 

43 IS 4794(Part 2):1986 Push button switches: Part 2 Push button switches, Dec 2005 

Type 1 

44 IS 4795(Part 1):1968 Holders for indicator lamps for electronic and Dec 2005 2 

telecommunication equipment: Part 1 General 

requirements and tests 

45 IS 4795(Part 2):1978 Holders for indicator lamps for electronic and Dec 2005 

telecommunication equipment: Part 2 Type E 10, E 14 

and BA 9 

46 IS 5033:1969 Telescopic aerials for portable radio receivers Dec 2005 

47 IS 5051(Part 1):1982 Relays for electronic and telecommunication equipment: Dec 2005 

| JSS 50700-1972 Part 1 General requirements and tests (first revision) 

48 IS 5051(Part 2/Sec 1):1982 Relays for electronics and telecommunication Dec 2005 

| JSS 50703-1980 equipment: Part 2 Reed relays, Section 1 General 


| JSS 50703-1980 equipment: Part 2 Reed relays, Section 2 Type RR 1 


| JSS 50703-1980 equipment: Part 2 Reed relays, Section 3 Type RR 2 

51 IS 5051(Part 3/Sec 1):1985 Relays for electronic and telecommunication equipment: Dec 2005 

| JSS 50711-1975 Part 3 Armature relays, non sealed, Sec 1 Type RA 1 

52 IS 5054(Part 1/Sec 1):1995 Radio frequency connectors: Part 1 General 

/ IEC 60169-1-1:1987 requirements and measuring methods, Section 1 

Dec 2005 1 

General (Second Revision) 

53 IS 5054(Part 1/Sec 2):1995 Radio frequency connectors: Part 1 General Dec 2005 


Electrical tests and measuring procedures: Reflection 

factor (second revision) 

54 IS 5054(Part 1/Sec 3):1995 Radio frequency connectors : Part 1 General Dec 2005 


Electrical tests and measuring procedures : Screening 

effectiveness (second revision) 

55 IS 6089(Part 1):1971 Sensitive switches: Part 1 General requirements and Dec 2005 

| IEC 60163 tests 

56 IS 6089(Part 2):1985 

| JSS 51204-1972 

Sensitive switches: Part 2 SPDT unsealed, Type 1 Dec 2005 

57 IS 6102(Part 1):1971 Finger knobs used in electronic and telecommunication Dec 2005 

equipment: Part 1 General requirements and tests 

58 IS 7751(Part 1):1975 Slide switches: Part 1 General requirements and tests Dec 2005 

59 IS 7751(Part 2):1985 Slide switches: Part 2 Slide switches, Type 1 Dec 2005 



60 IS 9606:1980 Dimensions of panels and racks (482.6 mm systems) Dec 2005 

| IEC 60297(1975) 

61 IS 9647:1986 General requirements and methods of tests for low Mar 2004 

| IEC 60130-1(1962) frequency connectors below 3 MHz including dc (first 

revision) 

62 IS 9891(Part 1):1981 Edge connectors for printed wiring board and insulated Mar 2004 

| JSS: 50805 board, having a contact pitch of 2.54 mm: Part 1 Test 

schedule and requirements 

63 IS 9891(Part 2):1981 

| JSS: 50805 

Edge connectors for printed wiring board and insulated 

board, having a contact pitch of 2.54 mm: Part 2 Non- 

Mar 2004 

polarized plug types 9891 IS-01011/25/33-W-A-0.75 

64 IS 9891(Part 3):1981 

| JSS: 50805 

Edge connectors for printed wiring board and insulated 

board, having a contact pitch of 2.54 mm : Part 3 Non- 

Mar 2004 

polarised plug types 9891 IS-02-11/25/33-I-A-0.75 

65 IS 9891(Part 4):1981 Edge connectors for printed wiring board and insulated Mar 2004 

| JSS: 50805 board, having a contact pitch of 2.54 mm: Part 4 Nonpolarised 

socket types 9891 IS-03-11/25/33-W/I-A/B-0.75 

66 IS 10482(Part 1):1983 Connectors for printed wiring board: Part 1 Test Dec 2005 

| JSS: 50806 schedule and requirements 

67 IS 10482(Part 2):1983 Connectors for printed wiring board: Part 2 Male adapter, Mar 2004 

| JSS: 50806 contact spacing 3.962mm Category 'C' Types 10482 IS- 

01-6/10/12/15/16/18/22-a/b-2-A-5/1.27 or 2.54/0.4 

68 IS 10482(Part 3):1983 Connectors for printed wiring board: Part 3 Socket, Card Dec 2005 

| JSS: 50806 insertion,contact spacing 3.962 mm Category 'A' Types 

10482 IS-02-6/10/12/15/16/18/22-a/b-2-A/B/C-5/1.27 or 

2.54/0.4 

69 IS 10482(Part 4):1986 Connectors for printed wiring board: Part 4 Socket, Card- Dec 2005 

| JSS: 50806 insertion, contact spacing 3.692 mm, categories A and 

AD types 10482 IS-03-6/10/15/18/22/28/36/43-a/b-2/3/4- 

A/B/C-5/1.27 to 2.54/0.4 

70 IS 11075(Part 1):1984 Radio frequency connectors of BNC, TNC and UHF Mar 2004 

| JSS: 52401 series: Part 1 Test schedule and requirements 

71 IS 11075(Part 2/Sec 1):1984 Radio frequency connectors of BNC, TNC and UHF Mar 2004 

| JSS: 52401 series: Part 2 BNC series, Sec 1 Straight plug, male, 

cabled, Type 11075 IS-01-01 to 04 and 50 to 54 


| JSS: 52401 series: Part 2 BNC Series, Sec 2 Cabled socket 11075 

IS-02-01 to 02 and 50 to 51 


| JSS: 52401 Series: Part 2 BNC Series, Sec 3 Plug, Right angle, 

Cabled Type 11075 IS-03-01 to 02 and 50 to 51 

74 IS 11162(Part 1):1985 Dimensions of non-insulated terminal tags for electronic Dec 2005 

equipment: Part 1 Type 1 


equipment : Part 2 Type 2 



76 IS 11162(Part 3):1985 Dimensionsof non-insulated terminal tags for electronic Dec 2005 












82 IS 11719(Part 1/Sec 1):1986 Dimensions of mechanical structures of the 482.6 mm Dec 2005 

| IEC 60297-2(1982) series: Part 1 Cabinets and pitches of rack structures, 

Sec 1 Cabinets 


| IEC 60297-2(1982) series: Part 1 Cabinets and pitches of rack structures, 

Sec 2 Pitches of rack structures 


| IEC 60297-3(1984) series: Part 2 Subracks and associated plug-in-units, 

Sec 1 Subracks 


| IEC 60297-3:1984 series: Part 2 Subracks and associated plug-in-units, 

Sec 2 Plug-in units 

86 IS 11777(Part 1):1986 Circular connectors for radio and associated sound Dec 2005 

| IEC 60130-9(1971) equipment for frequencies below 3 MHz including dc: 

Part 1 Test schedule and requirements 



Part 2 Free three-pin connector for microphone, Type 

11777 IS-01 

88 IS 11777(Part 3):1986 Circular Connectors for Radio and associated sound Dec 2005 


Part 3 Fixed three-socket connector for sound 

equipment,Type 11777 IS-02 



Part 4 Free five-pin connector for record player and tape 

recorder, Type 11777 IS-03 



Part 5 Fixed five-socket connector for record player and 

tape recorder, Type 11777 IS-04 


| IEC 60130-9A(1975) equipment for frequencies below 3 MHz including dc: 

Part 6 Free seven-pin connector for stereo tape player 

with car radio Type 11777 IS-05 





Part 7 Fixed seven-socket connector for stereo tape 

player with car radio, Type 11777 IS-06 



Part 8 Free Seven-pin connector for micro phone with 

remote control, Type 11777 IS-07 



Part 9 Fixed seven-socket connector for microphone 

with remote control, Type 11777 IS-08 



Part 10 Free six-pin connector for various 

applications,Type 11777 IS-09 



Part 11 Fixed six-socket connector for various 

applications, Type 11777 IS-10 



Part 12 Free six-socket connector for various 

applications, Type 11777 IS-11 



Part 13 Fixed six-pin connector for various applications, 

Type 11777 IS-12 


| IEC 60130-9B(1975) equipment for frequencies below 3 MHz including dc: 

Part 14 Free eight-pin connector for microphone and 

other various applications, Type 11777 IS-13 


| IEC 60130-9B(1975) equipment for frequencies below 3 MHz including dc: 

Part 15 Fixed eight-socket connector for microphone 

and other applications, Type 11777 IS-14 

101 IS 11778(Part 1):1987 Low frequency threaded coupling circular connectors: Dec 2005 

| JSS: 50812 Part 1 Test schedule and requirements 

102 IS 11779(Part 1):1987 Low frequency (Below 3 MHz including dc) miniature, Dec 2005 

| IEC 60130-7:1971 bayonet coupling circular connectors: Part 1 Test 

Schedule and requirements 

103 IS 12195(Part 1/Sec 1):1987 Dimensions of sockets for relays used in electronic and Dec 2005 

telecommunication equipment: Part 1 Sockets for 

armature relays, Sec 1 8 Pin socket 

104 IS 12195(Part 1/Sec 2):1987 Dimensions of sockets for relays used in electronic and Dec 2005 

telecommunication equipment: Part 1 Sockets for 

armature relays, Sec 2 11 Pin socket 

105 IS 12380(Part 1):1988 Radio frequency connectors of N series: Part 1 Test Dec 2005 

| JSS: 52402 schedule and requirements 



106 IS 12419(Part 1):1988 Radio frequency connectors of SMA, SMB and SMC Dec 2005 

| JSS: 52405 series: Part 1 Test schedule and requirements 

107 IS 12420(Part 2):1988 Circular audio connectors: Part 2 Socket, Five contacts, Dec 2005 

| JSS: 50831 non rigid Type 12420 IS-01 

108 IS 12420(Part 3):1988 Circular audio connectors: Part 3 Plug, Five contacts, Dec 2005 

| JSS: 50831 non rigid Type 12420 IS-02 

109 IS 12420(Part 4):1988 Circular audio connectors: Part 4 Plug five contacts, Dec 2005 

| JSS: 50831 rigid Type 12420 IS-03-R 

110 IS 12420(Part 5):1988 Circular audio connectors: Part 5 Plug ten contacts, Dec 2005 


111 IS 12420(Part 6):1988 Circular audio connectors:Part 6 Plug ten contacts, non Dec 2005 

| JSS: 50831 rigid type 12420 IS-05-R 

112 IS 12420(Part 7):1988 Circular andio connectors: Part 7 Socket ten contacts, Dec 2005 

| JSS: 50831 non rigid type 12420 IS-06-N 

113 IS 12420(Part 8):1988 Circular audio connectors: Part 8 Plug ten contacts, Dec 2005 


114 IS 12448(Part 1):1988 Basic testing procedures and measuring methods for Dec 2005 

| IEC 60512-1(1984) electromechanical components for electronic equipment: 

Part 1 General 

115 IS 12448(Part 2/Sec 1):1988 Part 2 General examination, electrical continuity and Dec 2005 

| IEC 60512-2(1985) contact resistance tests, insulation tests & voltage 

stress tests: Sec 1 General requirements 


| IEC 60512-2(1985) contact resistance tests, insulation tests voltage stress 

tests: Sec 2 Electrical continuity and contact resistance 

tests 



stress tests, Sec 3 Insulation tests 



stress tests, Sec 4 Voltage stress tests 

119 IS 12448(Part 3):1989 

| IEC 60512-3(1976) 

Basic testing procedures and measuring methods for Dec 2005 

electromechanical components for electronic equipment: 

Part 3 Current carrying capacity test 

120 IS 12448(Part 4):1989 

| IEC 60512-4(1976) 



Part 4 Dynamic stress tests 

121 IS 12448(Part 5/Sec 1):1989 Part 5 Impact tests (Free components), Static load tests Dec 2005 

| IEC 60512-5(1977) (Forced components); endurance tests & overload 

tests, Sec 1 Impact test 

122 IS 12448(Part 5/Sec 2):1989 Part 5 Impact tests (Free components), static load tests Dec 2005 

| IEC 60512-5(1977) (Fixed components), endurance tests and overload 

tests, Sec 2 Static load test (Fixed components) 





tests, Sec 3 Endurance tests 



tests, Sec 4 Overload tests 

125 IS 12448(Part 6):1991 Basic testing procedures and measuring methods of Dec 2005 

| IEC 60512-6(1977) electromechanical components for electronic equipment: 

Part 6 Climatic tests and soldering tests 

126 IS 12448(Part 7):1991 

| IEC 60512-7(1988) 



Part 7 Mechanical operating tests and sealing tests 

127 IS 12448(Part 8):1992 

| IEC 60512-8(1977) 



Part 8 Connector tests 

128 IS 12448(Part 9):1992 

| IEC 60512-9(1977) 



Part 9 Cable-clamping tests, explosion hazard tests, 

chemical resistance tests, fire hazard tests of 

resistance tests, capacitanc 

129 IS 13984(Part 1):1995 Specification for link and test connectors: Part 1 Test Mar 2004 

| IEC 60130-12 (1976) schedule and requirements 

130 IS 13984(Part 2/Sec 1):1994 Specification for link and test connectors: Part 2 Socket Dec 2005 

| IEC 60130-12 (1976) for conventional wiring, Sec 1 Two-way socket link and 

test connector 


| IEC 60130-12 (1976) for conventional wiring, Sec 2 Three-way socket link and 



| IEC 60130-12 (1976) for conventional wiring, Sec 3 Four-way socket link and 



| IEC 60130-12 (1976) for conventional wiring, Sec 4 Six-way socket link and 



| IEC 60130-12 (1976) for mounting on printed wiring boards: Sec 1 Two-way 

flat mounting socket link and test connector 


| IEC 60130-12 (1976) for mounting on printed wiring boards: Sec 2 Two-way 

upright mounting socket link and test connector 


| IEC 60130-12 (1976) for mounting on printed wiring boards: Sec 3 Three-way 

socket link and test connector 


| IEC 60130-12 (1976) for mounting on printed wiring boards: Sec 4 Four-way 





| IEC 60130-12 (1976) for mounting on printed wiring boards: Sec 5 Six-way 


139 IS 13984(Part 4/Sec 1):1995 Specification for link and test connectors: Part 4 U-Link Dec 2005 

| IEC 60130-12 (1976) plug:Sec 1 U-Link Polarized 


| IEC 60130-12 (1976) plug: Sec 2 U-Link Non-Polarized 


| IEC 60130-12 (1976) Plug: Sec 3 Double U-Link Plug Polarized 

142 IS 13984(Part 5/Sec 1):1995 Specification for link and test connectors: Part 5 Cord Dec 2005 

| IEC 60130-12 (1976) Plug: Sec 1 Polarized 


PRODUCT 59 


TERMINOLOGY 2 

DIMENSIONS 29 

OTHERS 17 

TOTAL : 142 



LITD 4 ELECTRON TUBES AND DISPLAY DEVICES 

SCOPE - To prepare Indian Standards relating to electronic tubes including X-ray tubes 

and flat panel display devices such as liquid crystal, solid state and plasma 

display devices. 

CORRESPONDING IEC/ISO COMMITTEE: 

IEC/TC 39 Electronic Tubes 

IEC/TC 110 Flat Panel Display Devices 



Date Amd. 

1 IS 1885(Part 4/Sec 1):1973 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Mar 2003 

1 Common terms (first revision) 

2 IS 1885(Part 4/Sec 2):1973 Electrotechnical vocabulary: Part 4 Electron tubes,Sec 2 Jan 2004 

X-ray tubes (first revision) 

3 IS 1885(Part 4/Sec 3):1970 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Jan 2004 3 

| IEC 235-1 3 Microwave tubes 

4 IS 1885(Part 4/Sec 4):1970 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Jan 2004 1 

4 Cathode-ray tubes 


5 Pulse terms 


6 Noise in microwave tubes 

7 IS 1885(Part 4/Sec 7):1973 Electrotechnical vocabulary: Part 4 Electron tubes, Sec Jan 2004 

7 Camera tubes 


8 Photosensitive devices 

9 IS 2032(Part 9):1969 Graphical symbols used in electrotechnology: Part 9 Mar 2003 

| IEC 117-6 Electron tubes (other than microwave tubes) 


| IEC 117-11 Microwave tubes 


| IEC 117-11 Microwave technology 

12 IS 2597(Part 1):1964 Code of practice for the use of electron tubes: Part 1 Mar 2003 2 

| BSCP 1005 (1962) Commercial receiving tubes 


| BSCP 1005 (1962) Special quality receiving tubes 


| BSCP 1005 (1962) Transmitting and industrial tubes 


| BSCP 1005 (1962) Cathode ray tubes 


| BSCP 1005 (1962) Rectifiers and thyratrons 



17 IS 4147:1981 Methods of measurements for electron tubes - Receiving Mar 2003 

| IEC 151 and transmitting tubes(first revision) 

18 IS 4579:1968 Methods of measurements on television picture tubes Feb 2004 

19 IS 4697:1968 Methods of measurements on Geiger Muller counter Mar 2003 2 

tubes 

20 IS 5323:1969 Letter symbols and abbreviations for electron tubes Mar 2003 

| IEC 151-14(1975) 

21 IS 5627:1987 Methods of measurements of radar and oscilloscope on Mar 2003 

| IEC 151-14(1975) cathode-ray display tubes(first revision) 

22 IS 5840(Part 1):1970 Dimensions of cathode-ray tubes: Part 1 Tube out-lines Mar 2003 2 

23 IS 5840(Part 2):1970 Dimensions of cathode-ray tubes: Part 2 Bases Mar 2003 1 

24 IS 5840(Part 3):1970 Dimensions of cathode-ray tubes: Part 3 EHT terminals Mar 2003 

25 IS 6134(Part 1):1978 

| IEC 235-2(1972) 

Methods of measurement of electrical characteristics of Mar 2003 

microwave tubes: Part 1 Common to all microwave tubes 

[Incorporating IS 6134(Part 1/Sec 1) and IS 6134(Part 

1/Sec 2)] 

26 IS 6134(Part 2):1973 Methods of measurement of electrical characteristics of Mar 2003 

| IEC 235-2 microwave tubes: Part 2 Oscillator tubes 


| IEC 235-2 microwave tubes: Part 3 Amplifier tubes 


| IEC 235-2 microwave tubes: Part 4 Magnetrons 


| IEC 235-2 microwave tubes: Part 5 Parasitic noise 


| IEC 235-5 microwave tubes: Part 6 Low-power oscillator klystrons 


| IEC 235-6 microwave tubes: Part 7 High power klystrons 


| IEC 235-7 microwave tubes: Part 8 Gas-filled microwave switching 

devices 


| IEC 235-8 microwave tubes: Part 9 Backward-wave oscillator tube 

'0' type 


| IEC 235-9 microwave tubes: Part 10 Crossed-field amplifier tubes 

35 IS 6136:1971 Basic requirements for cathode-ray tubes Feb 2004 



36 IS 6214:1971 Specification for phosphors for cathode-ray tubes Mar 2003 

37 IS 6567:1972 Radiation protection for an X-ray tube in a protective Feb 2004 1 

tube-housing,operating between 10kV and 400 kV 

38 IS 6757:1972 Dimensions for high tension cable terminations for X-ray Feb 2004 

tubes 

39 IS 6758:1972 Dimensions for high tension receptacles for X-ray tubes Feb 2004 

40 IS 7144:1973 Methods of measurements on camera tubes Feb 2004 

| IEC 151-26(1971) 

41 IS 7146(Part 1):1973 Methods of measurement on photosensitive devices: Mar 2003 1 

| IEC 306-1(1969) part 1 Basic considerations 

42 IS 7146(Part 2):1974 Methods of measurement on photosensitve devices: Part Mar 2003 

| IEC 306-2(1969) 2 Photo tubes 

43 IS 7146(Part 3):1974 Methods of measurement on photosensitve devices: Part Mar 2003 

| IEC 306-3(1970) 3 Photoconductive cells for use in the visible spectrum 

44 IS 7146(Part 4):1974 Methods of measurement on photosensitive devices: Mar 2003 

| IEC 306-4(1971) Part 4 Photomultipliers 

45 IS 8441:1977 Methods of measurements on incidental X-radiation from Feb 2004 

electron tubes 

46 IS 9492:1980 Methods of measurement of RF/microwave leakage from Mar 2003 

| IEC 235-2 & 2C(1976) integral circuit electron tubes 

47 IS 9883:1981 Photometric and colorimetric methods of measurements Mar 2003 

| IEC 441(1974) of the light emitted by a cathode-ray tube screen 

48 IS 10071:1981 Methods of measurement for hot cathode gas filled tubes Mar 2003 

| IEC 151-17(1969) 

49 IS 10503:1983 Methods of measurement of colour television picture Feb 2004 

| IEC 151-28(1978) tubes 

50 IS 13899:1993 Blank detail specification for colour picture tube with Feb 2004 

electrostatic focussing and electromagnetic deflection 

for colour television receivers 

51 IS 13900:1993 Generic specification for colour picture tube with Feb 2004 

electrostatic focussing and electromagnetic deflection 

for colour television receivers 




PRODUCT 2 



TERMINOLOGY 8 

DIMENSIONS 5 

SYMBOLS 4 

OTHERS 5 

TOTAL : 51 



LITD 5 SEMICONDUCTOR AND OTHER ELECTRONIC COMPONENTS AND 

DEVICES 

SCOPE - To prepare Indian standards relating to: 

a) Semiconductor devices & integrated circuits. 

b) Electronic assembly technologies and printed board assemblies. 

c) Piezoelectric and dielectric devices for frequency control and 

selection. 

d) Parts and components displaying magnetic properties and ferrite 

materials 

e) Capacitors resistors and inductors for use in electronics devices. 


IEC/TC 40 Capacitors and resistors for electronic equipment. 

TC 47 Semiconductor devices 

SC 47A Integrated circuits. 

SC 47D Mechanical standardization for semiconductor devices. 

SC 47E Discreet semiconductor devices. 

TC 49 Piezoelectric and dielectric devices for frequency control and 

selection. 

TC 51 Magnetic components and ferrite materials. 

TC 91 Electronics assembly technology 



Date Amd. 

1 ISQC 001002 : 2000 IEC quality assessment system for electronic Dec 2005 

/ IECQC 001002-1:1998 components (IECQ) - Rules of procedure Part 1: 

Administration (First revision) 

2 ISQC 250100 : 1988 

/ IECQC 250100 (1983) 

Inductor and transformer cores for telecommunications: Dec 2005 

Sectional specification:Magnetic oxide cores for inductor 

applications 

3 ISQC 250101 : 1988 Inductor and transformer cores for Dec 2005 

/ IECQC 250101 (1983) telecommunications:Blank detail specification: Magnetic 

oxide cores for inductor application, Assessment Level A 

4 ISQC 250200 : 1986 

/ IECQC 250200 (1985) 

Inductor and transformer cores for telecommunications 

Sectional specification: Magnetic oxide cores for broad- 

Dec 2005 

band transformers 

5 ISQC 250201 : 1988 Inductor and transformer cores for telecommunications Dec 2005 

/ IECQC 250201& 2 - 85 blank detail specification: Magnetic oxide cores for 

broad-band transformers,Assessment levels A and B 

6 ISQC 250300 : 1988 Inductor and transformer cores for telecommunication: Dec 2005 

/ IECQC 250300 (1987) Sectional specification: Magnetic oxide cores for 

transformers and chokes for power application 

7 ISQC 250301 : 1988 Inductor and transformer cores for telecommunications : Dec 2005 

/ IECQC 250301 (1987) Blank detail specification: Magnetic oxide cores for 

transformers and chokes for power applications, 

Assessment Level A 

8 ISQC 260000 : 2000 Transformers and inductors for use in electronic and Jan 2003 

/ IECQC 260000 (1996) telecommunication equipment: Part 1 Generic 

specification 




/ IECQC 260100 (1996) telecommunication equipment: Part 2 Sectional 

specification for signal transformers on the basis 

ofcapability approval procedure 


/ IECQC 260200(1996) telecommunication equipment: Part 3 Sectional 

specification for power transformers on the basis of 

capability approval procedure 



specification for power transformers for switchedmode 

power supplies(SMPS) on the basis of capability 

approval procedure 



specification for pulse transformers of assessed quality 

for use in electronic equipment for capability approval 



specification for inductors on the basis of assessed 

capability approval procedure 

14 ISQC 300000 : 1988 Fixed capacitors for use in electronic equipment - Dec 2005 

/ IECQC 300000:1982 Generic specification 

15 ISQC 300100 : 1985 

/ IECQC 300100:1982 

Fixed capacitors for use in electronic equipment. 

Sectional specification - Fixed polyethylene- 

Dec 2005 

teraphthalate film dielectric metal foil dc capacitors 

16 ISQC 300200 : 2000 Fixed capacitors for use in electronic equipment; 

/ IECQC 300200:1982 Sectional specification: Fixed tantalum capacitors with 

Dec 2005 2 

non-solid or solid electrolyte 

17 ISQC 300201 : 2000 Fixed capacitors for use in electronic equipment: Blank 

/ IECQC 300201:1984 detail specification for fixed tantalum capacitors with 

Dec 2005 1 

solid electrolyte and porous anode - Assessment level E 

18 ISQC 300300 : 1993 Fixed capacitors for use in electronic equipment: Dec 2005 

/ IECQC 300300:1985 Sectional specification for aluminium electrolytic 

capacitors with solid and non-solid electrolyte 

19 ISQC 300301 : 1993 Fixed capacitors for use in electronic equipment, Blank Dec 2005 

/ IECQC 300301:1985 detail specification: Aluminium electrolyte capacitors 

with non-solid electrolytic - Assessment Level E 

20 ISQC 300400 : 1988 

/ IECQC 300400:1982 

Fixed capacitors for use in electronic equipment 

Sectional specification. Fixed metallized polyethylene- 

Dec 2005 

teraphthalate film dielectric dc capacitors 

21 ISQC 300401 : 1988 

/ IECQC 300401:1982 

Fixed capacitors for use in electronic equipment: Blank 

detail specification: Fixed metallized polyethylene- 

Dec 2005 

teraphthalate film dielectric dc capacitors - Assessment 

level E 


/ IECQC 300600:1988 Sectional specification for fixed capacitors of ceramic 

dielectric, Class 1 



23 ISQC 300601 : 1992 Fixed capacitors for use in electronic equipment: Blank Dec 2005 

/ IECQC 300601:1988 detail specification for fixed capacitors of ceramic 

dielectric, Class 1 - Assessment level E 

24 ISQC 760200 : 1995 Semiconductor devices-integrated circuits-Sectional Dec 2005 

/ IECQC 760200(1992) specification for film integrated circuits and hybrid film 

integrated circuits on the basis of capability approval 

procedure 

25 ISQC 760201 : 1995 Semiconductor devices-integrated circuits - Blank detail Dec 2005 

/ IECQC 760201(1991) specification for filmintegrated circuits and hybrid film 

integrated circuits on the basis of capability approval 

procedure 


/ IECQC 001001:1998 components (IECQ) - Basic Rules (First revision) 



Documentation (First revision) 



Approval Procedures (First revision) 


/ IECQC 001003:1998 components (IECQ) - Guidance documents (First 

revision) 

30 ISQC 250000 : 1988 Inductor and transformer cores for Dec 2005 

/ IECQC 250000 (1982) telecommunications:Part 1 Generic specification 


/ IECQC 300700:1988 Sectional specification for fixed capacitors of ceramic 

dielectric, Class 2 

32 ISQC 300701 : 1993 Fixed capacitors for used in electronic equipment: Blank Dec 2005 

/ IECQC 300701:1988 detail specification for fixed capacitors of ceramic 

dielectric, Class 2 - Assessment level E 

33 ISQC 300800 : 1994 Fixed capacitors for use in electronic equipment, Dec 2005 

/ IECQC 300800:1989 Sectional specification for fixed tantalum chip capacitors 

34 ISQC 300801 : 2000 Fixed capacitors for use in electronic equipment - Blank Dec 2005 

/ IECQC 300801:1989 detail specification for fixed tantalum chip capacitors - 

Assessment level E 

35 ISQC 301200 : 1993 

/ IECQC 301200:1982 

Fixed capacitors for use in electronic equipment: Dec 2005 

Sectional specification for fixed metallized polypropylene 

film dielectric dc capacitors 

36 ISQC 301201 : 1993 Fixed capacitors for use in electronic equipment : Blank Dec 2005 

/ IECQC 301201:1982 detail specification for fixed metallized polyproplene film 

dielectric dc capacitors - Asseement Level E 

37 ISQC 301301 : 1993 

/ IECQC 301301:1987 

Fixed capaictors for use in electronic equipment: Blank Dec 2005 

detail specification for fixed metallized polypropylene film 

dielectric ac and pulse capacitors - Assessment level E 

38 ISQC 301800 : 2001 Fixed capacitors use in electronic equipment, Sectional Mar 2004 

/ IECQC 301800:1991 specification fixed polypropylene film dielectric metal foil 

dc capacitors 



39 ISQC 301801 : 2001 Fixed capacitor use in electronic equipment: Blank Mar 2004 

/ IECQC 301801:1991 detail specification: Fixed polyproplene film dielectric 

metal foil dc capacitors - Assessment level E 

40 ISQC 302400 : 1994 Fixed capacitors for use in electronic equipment - Dec 2005 

/ IECQC 302400:1993 Sectional specification for fixed capacitors for 

electromagnetic interference suppression and 

connection to the supply mains 

41 ISQC 302401 : 1994 Fixed capacitors for use in electronic equipment - Blank Dec 2005 

/ IECQC 302401:1993 detail specification for fixed capacitors for 

electromagnetic interference suppression and 

connection to the supply mains - Assessment level D 

42 ISQC 390000 : 1994 Generic specification for fixed film resistors networks for Dec 2005 

/ IECQC 390000:1991 use in electronic equipment 

43 ISQC 390100 : 1993 Sectional specification for fixed film resistors networks of Dec 2005 

/ IECQC 390100:1991 assessed quality on the basis of capability approval 

procedure 

44 ISQC 390101 : 1993 Blank detail specification for fixed film resistors networks Dec 2005 

/ IECQC 390101:1991 of assessed quality on the basis of capability approval 

procedure. Assessment level E 

45 ISQC 400000 : 1988 Fixed resistors for use in electronic equipment: Generic Dec 2005 

/ IECQC 400000:1982 specification 

46 ISQC 400100 : 1988 

/ IECQC 400100:1982 

Fixed resistors for use in electronic equipment: 

Sectional specifiication for fixed low-power non-wire- 

Dec 2005 

wound resistors 

47 ISQC 400101 : 1988 Fixed resistors for use in electronic equipment. Blank Dec 2005 

/ IECQC 400101:1982 detail specification: Fixed low-power non-wire-wound 

resistors assessment level E 

48 ISQC 400200 : 1992 Fixed resistors for use in electronic equipment. Dec 2005 

/ IECQC 400200:1982 Sectional specification: Fixed power resistors 

49 ISQC 400300 : 1992 Fixed resistors for use in electronic equipment, Dec 2005 

/ IECQC 400300:1982 Sectional specification: Fixed precision resistors 

50 ISQC 400301 : 1992 Fixed resistors for use in electronic equipment. Blank Dec 2005 

/ IECQC 400301:1983 detail specification for fixed precision resistors - 

Assessment Level E 

51 ISQC 400400 : 1994 Sectional specification for fixed resistor networks with Dec 2005 

/ IECQC 400400:1983 individually measurable resistors 

52 ISQC 400401 : 1994 Blank detail specification for fixed resistor networks with Dec 2005 

/ IECQC 400401:1983 individually measurable resistors all of equal value and 

equal dissipation - Assessment level E 

53 ISQC 400402 : 1993 Blank detail specification: Fixed resistor networks with Dec 2005 

/ IECQC 400402:1983 individually measurable resistor of either different 

resistance values or diffierent rated dissipations - 


54 ISQC 400500 : 1993 Sectional specification for fixed resistor networks in Dec 2005 

/ IECQC 400500:1984 which not all resistors are individually measurable 

55 ISQC 400501 : 1994 Blank detail specification for fixed resistor networks in Dec 2005 

/ IECQC 400501:1984 which not all resistors are individually measurable, 




56 ISQC 400600 : 1994 

/ IECQC 400600:1989 

Sectional specification for fixed chip resistors Dec 2005 

57 ISQC 400601 : 1993 

/ IECQC 400601:1989 

Blank detail specification for fixed chip resistors Dec 2005 

58 ISQC 410000 : 2000 

/ IECQC 410000:1989 

Potentiomenters for use in electronic equipment - 

Generic specification 

Dec 2005 1 

59 ISQC 410100 : 1992 Potentiomenters for use in electronic equipment : Dec 2005 

/ IECQC 410100:1989 Sectional specification - Lead screw actuated and rotary 

preset potentiomenters 

60 ISQC 410101 : 1992 Potemtiomenters for use in electronic equipment Blank Dec 2005 

/ IECQC 410101:1989 Detail specification - Lead screw actuated and rotary 

preset potentiometers - Assessment level E 

61 ISQC 420000 : 1994 Generic specification, Varistors for use in electronic Dec 2005 

/ IECQC 420000:1991 equipment 

62 ISQC 420100 : 1994 

/ IECQC 420100:1991 

Sectional specification for surge suppression varistors Dec 2005 

63 ISQC 420101 : 1994 

/ IECQC 420101:1991 

Blank detail specification for silicon carbide surge 

supprssion varistors - Assessment level E 

Dec 2005 

64 ISQC 420102 : 1993 Blank detail specification for zinc oxide surge Dec 2005 

/ IECQC 420102:1991 suppression varistors - Assessment level E 

65 ISQC 440000 : 1994 Generic specification for directly heated positive step Dec 2005 

/ IECQC 440000:1982 function temperature coefficient thermistors 

66 ISQC 440001 : 1993 Blank detail specification for directly heated positive step Dec 2005 

/ IECQC 440001:1982 function temperature coefficient thermistors - 


67 ISQC 680000 : 1995 Quartz Crystal units: Part 1 Generic specification Jan 2004 

/ IECQC 680000(1993) 

68 ISQC 680100 : 1995 Quartz crystal units: Part 2 Sectional Specification Jan 2004 

/ IECQC 680100:1993 capability approval 

69 ISQC 680101 : 1995 Quartz crystal units: Part 2 Sectional specification - Jan 2004 

/ IECQC 680101:1993 capability approval Sec 1 Blank detail specification 

70 ISQC 720100 : 2001 Semiconductor devices, Sectional specification for opto Feb 2004 

/ IECQC 720100:1991 electronics devices 

71 ISQC 750102 : 1989 Semiconductors devices Discrete devices, Bipolar Jan 2005 

/ IECQC 750102:1986 transistors Blank detail specification for ambient rated 

bipolar transistors for low and high frequency amplification 

72 ISQC 750104 : 1993 Semiconductor devices - Discrete devices - Bipolar Dec 2005 

/ IECQC 750104:1991 transistors - Blank detail specifications for Bipolar 

transistors for switching applications 

73 ISQC 750105 : 1994 Semiconductor devices,discrete devices: Dec 2005 

/ IECQC 750105:1986 Signal(including switching) & regulator diodes, Blank 

Detail spec for voltage regulator diodes & voltagereference 

diodes, excluding temperature-compensated 

precision reference diodes 




/ IECQC 750107:1991 transistors - Blank detail specifications for case-rated 

bipolar transistors for high frequency applications 

75 ISQC 750108 : 1992 Semiconductor devices, discrete devices: Part 2 Dec 2005 

/ IECQC 750108:1989 Rectifier diodes section 1, Blank detail specification for 

rectifier diodes (including avalanche rectifier diodes) 

ambient and case-rated up to 100 A 

76 ISQC 750111 : 1994 Semicondutor devices - Discrete devices - Bipolar Dec 2005 

/ IECQC 750111:1991 transistors - Blank detail specification for bipolar triode 

thyristors (triacs) ambient or case-rated 100 A 

77 ISQC 760000 : 1994 Semiconductor devices - Integrated circuits - Generic Dec 2005 

/ IECQC 760000:1988 specification for film integrated circuits and hybrid film 

integrated circuits 

78 ISQC 760100 : 1995 Semiconductor devices-integrated circuits-Sectional Dec 2005 


integrated circuits on the basis of qualification approval 

procedure 

79 ISQC 760101 : 1995 Semiconductor devices-integrated circuits Blank detail Dec 2005 


integrated circuits on the basis of qualification approval 

procedure 

80 ISQC 790130 : 1995 Semiconductor devices-integrated circuits, Digital Dec 2005 

/ IECQC 790130(1992) integrated circuits, Blank detail specification for HCMOS 

digital integrated circuits (series 54/74 HC, 54/74 HCT, 

54/74 HCU) 


/ IECQC 790131(1992) integrated circuits, Blank detail specification for 

complementary MOS digital integrated circuits (series 4 

000 B and 4 000 UB) 


/ IECQC 790132(1991) integrated circuits, Blank detail specification for bipolar 

monolithic digital integrated circuit gates (excluding 

uncommitted logic arrays) 


/ IECQC 790202:1991 transistors - Blank detail specifications for monolithic 

integrated operational amplifiers 

84 IS 590:1964 

| IEC 40(CO)107 

Fixed paper dielectric capacitors for dc (revised) Dec 2005 1 

85 IS 824:1965 

| IEC 63:1963 

Preferred values for resistors and capacitors (revised) Dec 2005 

86 IS 1885(Part 6):1978 Electrotechnical vocabulary: Part 6 Printed circuits (First Jan 2004 

revision) 

87 IS 1885(Part 7):2001 Electrotechnical vocabulary: Part 7 Semiconductor Apr 2004 

devices and integrated circuits (Second Revision) 

88 IS 1885(Part 12):1966 Electrotechnical vocabulary: Part 12 Ferrimagnetic oxide Jan 2003 2 

| IEC 125(961) materials 

89 IS 1885(Part 31):1971 Electrotechnical vocabulary: Part 31 Magnetism Jan 2003 

| IEC 109(CO)1004 



90 IS 1885(Part 41):1975 Electrotechnical vocabulary: Part 41 Non-reciprocal Jan 2004 

| IEC 51(CO)112 electromagnetic components 

91 IS 1885(Part 44):2001 Electrotechnical vocabulary: Part 44 Piezoelectric Dec 2004 

devices [superseding IS 1885(Part 5):1965 and 

1885(Part 33):1972] (First Revision) 

92 IS 1885(Part 45):1977 

| IEC 50(516) 

Electrotechnical vocabulary: Part 45 Capacitors Dec 2005 

93 IS 1885(Part 46):1977 

| IEC 50(516) 

Electrotechnical vocabulary: Part 46 Resistors Jan 2004 

94 IS 2001:1968 

| IEC 2001:1968 

Fixed silvered mica capacitors (first revision) Dec 2005 1 

95 IS 2032(Part 8):1965 

| IEC 3(CO)456 

Graphical symbols used in electrotechnology: Part 8 

Semiconductor devices 

Jan 2004 

96 IS 2032(Part 17):1975 Graphical symbols used in electrotechnology: Part 17 Jan 2004 

| IEC 117-16 Ferrite cores and magneticstorage matrices 

97 IS 2032(Part 24):1980 Graphical symbols used in electrotechnology: Part 24 Jan 2004 

| IEC PUB 117-13 Binary logic elements 

98 IS 2786(Part 1):1978 Specification for ceramic dielectric capacitors, type 2: Dec 2005 

| IEC 40(Sectt)278 Part 1 General requirements and methods of tests (first 

revision) 

99 IS 2786(Part 2):1984 Specification for ceramic dielectric capacitors, type 2: Dec 2005 

Part 2 FCCG 01 and FCCG 02 capacitors 

100 IS 2935:1980 Guide for use of quartz crystal units for frequency control Jan 2004 

and selection (first revision) 

101 IS 3671(Part 1):1980 Air dielectric variable tuning capacitors: Part 1 Tests and Dec 2005 

| IEC 40(Sectt)140 general requirements (first Revision) 

102 IS 3700(Part 7):1970 Essential ratings and characteristics of semiconductor Dec 2005 

| IEC 147-1B devices:Part 7 Reverse blocking triode thyristors 

103 IS 3700(Part 11):1984 Essential ratings and characteristics of semiconductor Jan 2005 

| IEC 147-1K devices:Part 11 Light emitting diodes 

104 IS 3715(Part 4):1971 Letter symbols for semiconductor devices: Part 4 Jan 2005 

| IEC 148-1969 Thyristors (first revision) 

105 IS 3723(Part 1):1978 Capacitors for radio interference suppression: Part 1 Dec 2005 

| IEC 40(Sectt)1355 General requirements and methods of tests (first revision) 

106 IS 3723(Part 2):1983 Capacitors for radio interference suppression : Part 2 Dec 2005 

Type FCRS 1 

107 IS 3723(Part 3):1983 Capacitors for radio interference suppression: Part 3 Dec 2005 

Type FCRS 2 

108 IS 4317:1983 Aluminium electrolytic capacitors with non-solid Dec 2005 

| IEC 384-4:1977 electrolytic (second revision) 

109 IS 4400(Part 7):1971 Methods of measurements on semiconductor devices: Dec 2005 

Part 7 Reverse blocking triode thyristors 



110 IS 4411:1967 Code for designation of semiconductor devices Dec 2005 

111 IS 4570(Part 1):1983 Crystal unit holders: Part 1 General requirements and Dec 2005 

tests (first revision) 

112 IS 4570(Part 2):1999 Crystal unit holders: Part 2 Metal, solder seal, two pin Dec 2005 

| IEC 122-3(1977) crystal unit holders types AA and AB(First revision) 

113 IS 4570(Part 3):1984 Crystal unit holders: Part 3 Tube type crystal unit Dec 2005 

| IEC 122-3(1977) holders (glass) Types AP, AR, AS, AT And AU 

114 IS 4570(Part 4):1999 Crystal unit holders: Part 4 Metal, solder seal, two wire Dec 2005 

| IEC 122-3(1977) crystal unit holders Type BC and BC/1(First revision) 

115 IS 4570(Part 5):1999 Crystal unit holders: Part 5 Metal, solder seal, two-wire Dec 2005 

| IEC 122-3(1977) crystal unit holders Types BF, BF/1 and BG, BG/1(First 

revision) 

116 IS 4570(Part 6):1999 Crystal unit holders: Part 6 Metal, solder seal, two pin Dec 2005 

| IEC 122-3(1977) crystal unit holder Type CX (First revision) 

117 IS 4570(Part 7):1985 Crystal unit holders: Part 7 Microminiature, metal, solder Jan 2004 

| IEC 122-3(1977) seal, two-wire crystal unit holder, type DJ 

118 IS 4570(Part 8):1999 Crystal unit holders: Part 8 Metal, welded, three wire Dec 2005 

| IEC 122-3(1977) crystal unit holder TypeDK (First revision) 

119 IS 4570(Part 9):1999 Crystal unit holders: part 9 Metal, welded, two pin Dec 2005 

| IEC 122-3(1977) crystal unit holders Type DN (First revision) 

120 IS 4570(Part 10):1999 Crystal unit holders:Part 10 Metal, welded, two-wire Dec 2005 

| IEC 122-3(1977) crystal unit holder type DP (First revision) 

121 IS 4570(Part 11):1999 Specification for crystal unit holders: Part 11 Metal, Dec 2005 

| IEC 122-3(1977) welded, two-pin crystal unit holder, type DQ (First 

revision) 

122 IS 4570(Part 12):1989 

| IEC 122-3(1977) 

Specification for crystal unit holders: Part 12 Dec 2005 

Microminiature, metal, cold-welded, two-wire crystal unit 

holder type EB 

123 IS 4570(Part 13/Sec 1):1993 Crystal unit holders:Part 13 Quartz Crystal unit holder Dec 2005 1 

outline for automatic handling, Sec 1 Metal, Sealed, two 

pin crystal unit holder type CU 01 

124 IS 4570(Part 13/Sec 2):1993 Crystal unit holders :Part 13 Quartz crystal unit holder Dec 2005 

outline for automatic handling, Sec 2 Metal, Sealed,two 

pin crystal unit holder Type CU 02 

125 IS 4570(Part 13/Sec 3):1993 Crystal unit holders :Part 13 Quartz Crystal unit holder Dec 2005 


pin crystal unit holder Type CU 03 

126 IS 4570(Part 13/Sec 4):1993 Crystal unit holders :Part 13 Quartz crystal unit holder Dec 2005 



127 IS 4570(Part 13/Sec 5):1993 Crystal unit holders : Part 13 Quartz crystal unit holder Dec 2005 

outline for automatichandling, Sec 5 Metal, Sealed, two 




128 IS 4633:1968 Fixed metallized-paper dielectric capacitors for direct Dec 2005 1 

| IEC 166 current 

129 IS 5000(OD 01):1969 Dimensions of semiconductor devices: Devices outline Jan 2005 

OD1 

130 IS 5000(OD 04):1969 Dimensions of semiconductor devices: Device outline Jan 2005 

OD 4 


OD 5 


OD 6 


OD 7 


OD 8 


OD 9 (first revision) 


OD 10 


OD 11 

138 IS 5000(OD 12):1971 Dimensions of semiconductor devices : Device outline Jan 2005 

OD 12 


OD 13 


OD 14 


OD 15 


OD 16 

143 IS 5000(OD 17):1974 Dimensions of semiconductor devices: Device outline Dec 2005 

OD 17 


OD 18 


OD 19 


OD 20 


OD 21 


OD 23 


/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS 

Page 9 of 30


OD 25 


OD 26 


OD 27 


OD 28 


OD 29 


OD 31 


OD 32 


OD 33 


OD 34 


OD 35 


OD 36 


OD 37 


OD 38 


OD 39 


OD 40 


OD 41 


OD 42 


OD 43 


OD 44 


OD 45 


OD 46 




OD 47 

171 IS 5001(Part 1):1969 Guide for preparation of drawings of semiconductor Dec 2005 

| IEC 191-1 devices and integrated circuits: Part 1 Semiconductor 

devices 

172 IS 5001(Part 2):1973 Guide for preparation of drawings of semiconductor Dec 2005 

| IEC 47(CO)384 devices and integrated circuits: Part 2 Integrated circuits 

173 IS 5027:1969 Method of measurement of current noise generated in Dec 2005 

| IEC 195 fixed resistors 

174 IS 5469(Part 1):1969 Code of practice for the use of semiconductor junction Jan 2005 

| BS CP 7016(Pt 1):196 devices: Part 1 Applicable to all devices 

175 IS 5469(Part 2):1973 Code of practice for the use of semiconductor junction Dec 2005 

| BS 71/20573 devices: Part 2 Diodes 

176 IS 5469(Part 3):1973 Code of practice for the use of semiconductor junction Dec 2005 

| BS 71/20573 devices: Part 3 Thyristors 

177 IS 5475(Part 1):1978 Polystyrene film dielectric capacitors: Part 1 General Dec 2005 

| IEC 40(CO)363 requirements and methods of tests (first revision) 

178 IS 5475(Part 2):1979 Polystyrene film dielectric capacitors: Part 2 Type FCPS Dec 2005 

| JSS 50211 1 

179 IS 5475(Part 4):1985 Polystyrene film dielectric capacitors: Part 4 Type FCPS Dec 2005 

3 

180 IS 5575(Part 1):1970 

| IEC 314-1970 

Temperature control devices for quartz crystal units Dec 2005 2 

181 IS 5575(Part 2):1978 Temperature control devices for quartz crystal units Dec 2005 

(heating type): Part 2 Pin connections and bases 

182 IS 5786(Part 1):1978 Fixed resistors general purpose low power: Part 1 Dec 2005 

| IEC 115-1 General requirements and methods of tests (first revision) 


Resistors Type FRLP - 2 (first revision) 















190 IS 5921(Part 1):1993 Metal-clad base materials for printed circuits for use in Jul 2002 

| IEC 249-1(1982)&Amds electronic and telecommunication equipment: Part 1 

General requirements and test (Second revision) 

191 IS 5921(Part 2):1973 Metal-clad base materials for printed circuits for use in 

| IEC 249-2 electronic and telecommunication equipment: Part 2 

Feb 2004 2 

Paper phenolic copper clad laminated sheet - PF-CP-Cu 

economic grade 

192 IS 5921(Part 3):1978 Metal-clad base materials for printed circuits for use in Feb 2004 


Phenolic cellulose paper copper-clad laminated sheet - 

PF-CP-Cu High electric grade 



Phenolic cellulose paper copper-clad laminated sheet of 

defined flammability 



Epoxide cellulose paper copper-clad laminated sheet of 

defined flammability 



Epoxide woven glass fabric copper-clad laminated sheet, 

general purpose grade 

196 IS 5921(Part 7):1987 Specification for metal-clad base materials for printed Jul 2002 

| IEC 249-2 circuits for use in electronic and telecommunication 

equipment: Part 7 Epoxide woven glass fabric copperclad 

laminated sheet of defined flammability (Vertical 

burning test) 

197 IS 5921(Part 8):1988 Metal clad base materials for printed circuits for use in Jul 2002 

| IEC 249-2 electronic and telecommronication equipment: Part 8 

Flexible copper-clad polyester (PETP) film 



Epoxide cellulose paper core, epoxide glass cloth 

surface copper clad laminated sheet of defined 

flammability (VBT) 



Epoxide non-woven/glass reinforced/woven copper-clad 

laminated sheet of defined flammability(VBT) 


| IEC 249-2 electronic and telecommunication equipment:Part 11 

Thin epoxide woven glass fabric copper clad laminated 

sheet, general purpose grade,for use in the fabrication of 

multilayer 



Thin epoxide woven glass fabric copper clad laminated 

sheet of defined flammability, for use in the fabrication of 

multilayer printed layers 



202 IS 6077(Part 1):1998 Permanent magnets: Part 1 General requirements and Jan 2003 

tests(First Revision) 

203 IS 6133(Part 1):1971 Piezoelectric filters for use in telecommunication and Dec 2005 2 

measuring equipment: Part 1 General requirements and 

tests 

204 IS 6235:1992 Dimensions of pot-cores made of magnetic oxides and Dec 2005 

| IEC 133 (1985) associated parts (first revision) 

205 IS 6297(Part 1):1971 Transformers and inductors (Power, audio, pulse and 

| MILC 15305C-1065 switching) for electronic equipment: Part 1 General 

Jan 2004 4 

requirements and tests 

206 IS 6297(Part 2):1973 Transformers and inductors (Power, audio, pulse and Jan 2004 

switching) for electronic equipment: Part 2 Power 

transformers (superseding IS:591-1964) 

207 IS 6297(Part 3):1974 Transformers and inductors (power, audio, pulse and Jan 2004 

switching) for electronic equipment: Part 3 Audio 

frequency transformers and chokes (superseding 

IS:3289-1965 and IS:4002-1967) 

208 IS 6297(Part 4):1974 Transformers and inductors (Power, audio, pulse and Jan 2004 

switching) for electronic equipment: Part 4 Pulse and 

switching traansformers 

209 IS 6537:1972 Guide to the use of temperature control devices for Dec 2005 

crystal units 

210 IS 6553:1971 Environmental requirements for semiconductor devices Dec 2005 

| IEC 47Sectt)445 and integrated circuits 

211 IS 7305:1984 Fixed capacitors used in electronic equipment (first Dec 2005 

| IEC 384-1:1972 revision) 

212 IS 7405(Part 1):1994 Specification for printed wiring boards: Part 1 General Jul 2002 

| IEC 326-2 (1990) requirements and methods of test (Second Revision) 

213 IS 7405(Part 2):1984 Specification for printed wiring boards: Part 2 Single and Feb 2004 

| IEC 326-4 (1980) double sided printed boards with plain holes 

214 IS 7410(Part 1):1974 Guide to the use of the piezoelectric filters: Part 1 Jan 2004 1 

Quartz crystal filters 

215 IS 7410(Part 2):1975 Guide to the use of the piezoelectric filters: Part 2 Dec 2005 

piezoelectric ceramic filters 

216 IS 7412:1974 

| IEC 47 (CO) 437 

Life testing of semiconductor devices Dec 2005 

217 IS 7416(Part 1):1986 Dimensions for TV ferrite components: Part 1 Cores for Jan 2004 

deflection coil 

218 IS 7416(Part 2):1991 Dimensions for TV ferrite components: Part 2 Ferrite rod Jan 2004 

for linearity controlunit (first revision) 

219 IS 7416(Part 3):1976 Dimensions for TV ferrite components: Part 3 Tuning Jan 2004 

magnet for linearity control unit 

220 IS 7416(Part 4):1991 Dimensions for TV ferrite components: Part 4 Ring Nov 2004 

magnet for linearity control unit (First revision) 



221 IS 7416(Part 5):1976 Dimensions for TV ferrite components: Part 5 Segment Jan 2004 

magnet for linearity control unit 

222 IS 7416(Part 6):1987 Dimensions for TV ferrite components: Part 6 Beam Nov 2004 

centring magnet for deflection coil(First revision) 

223 IS 7416(Part 7):1976 Dimensions for TV ferrite components: Part 7 Pin Jan 2004 

cushion correction magnet for deflection coil 

224 IS 7416(Part 8):1985 Dimensions for TV ferrite components : Part 8 U&U core Jan 2004 

assembly for line output transformer (first revision) 

225 IS 7416(Part 10):1987 Dimensions for TV ferrite components: Part 10 Corner Nov 2004 

correction magnets(first revision) 

226 IS 7416(Part 11):1976 Dimensions for TV ferrite components: Part 11 Balun coreJan 2004 

227 IS 7416(Part 12):1984 Dimensions for TV ferrite components: Part 12 U core for Jan 2004 

line driver transformer 

228 IS 7430:1974 Dimensions of screw cores made of ferrimagnetic oxides Dec 2005 

| IEC 221A(1972) 

229 IS 7440(Part 2):1974 Essential ratings and characteristics of analogue Dec 2005 

| IEC147-1E73&147-1:72 integrated circuits: Part 2 Telecommunication amplifiers 

(audio, video and multichannel) 

230 IS 7440(Part 3/Sec 1):1976 Essential ratings and characteristics of analogue Dec 2005 

| IEC 147-1E(1973) integrated circuits: Part 3 Operational amplifier, Sec 1 

Having two input and one output 

231 IS 7440(Part 3/Sec 2):1977 Essential ratings and characteristics of analogue Dec 2005 

| IEC 147-1E(1973) integrated circuits:Part 3 Operational amplifier, Sec 2 

Having two input and two outputs 

232 IS 7527:1992 Dimensions of loudspeaker magnets (first revision) Dec 2005 

233 ** IS 7616:1974 Guide for calculation of the effective parameters of Dec 2005 

| IEC 205A (1968) magnetic piece parts 

234 IS 7687:1980 Methods of measurement for cores for inductors and Jan 2004 

| IEC 367-1(1971) transformers for telecommunications (first revision) 

235 IS 7748(Part 1):1975 Variable capacitors: Part 1 Tests and general Dec 2005 

| IEC 418-1:1974 requirements 

236 IS 7930:1976 Dimensions of toroids made of magnetic oxides or iron Dec 2005 

| IEC 51(CO)157 powder 

237 IS 7934:1981 Dimensions of square cores made of magnetic oxides Dec 2005 

| IEC 431-1973 and associated parts (first revision) 

238 IS 7957(Part 1):2001 Basic method for the measurement of resonance Dec 2004 

/ IEC 60444-1(1986) frequency and equivalent series resistance of quartz 

crystal units by zero phase technique in a network (First 

Revision of IS 7957:1976) 

239 IS 7962:1975 Methods of measurement for piezoelectric vibrations Dec 2005 

operating over the frequency range upto 30 MHz 



240 IS 8011:1976 Methods for the measurement of frequency and Dec 2005 

equivalent resistance of unwanted reasonance of filter 

crystal units 

241 IS 8083:1976 Dimensions of ceramic dielectric capacitors of the plate Dec 2005 

| IEC 234A:1970 type 

242 IS 8186:1976 Marking codes for values and tolerance of resistors and Dec 2005 

| IEC 62(1974) capacitors (superseding IS 825:1956 and IS 4114:1967) 

243 IS 8201:1976 

| JSS 54680 

High frequency wide-band matching transformer Jan 2004 

244 IS 8238:1976 

| IEC 40A(Sectt)325 

Guide for use of variable capacitors in electronic 

equipment 

Dec 2005 1 

245 IS 8271(Part 1):1981 Quartz crystal units used for frequency control and Jan 2004 

selection: Part 1 General requirements and tests (first 

revision) [superseding IS:2916(Part 1)-1969] 

246 IS 8271(Part 2/Sec 1):1981 Quartz crystal units used for frequency control and Jan 2004 

selection: Part 2 Series AAfor Oscillators, Sec 1 Quartz 

crystal units type AA-01 [superseding IS:2916(Part 2)- 

1972] 



crystal unit type AA-02 [superseding IS:2916(Part3)- 

1972] 



crystal unit type AA-03 [superseding IS:2916(Part4)-1972 



crystal unit type AA-04 [superseding IS:2916(Part5)- 

11972] 


selection: Part 2 Series AAfor Oscillators,Sec 5 Quartz 

crystal unit type AA-05 [superseding IS:2916(Part 6)- 

1972] 


selection: Part 2 Series AAfor Oscillators,Sec 6 Quartz 


1975] 

252 IS 8271(Part 2/Sec 7):1982 Quartz crystal units used for frequency control and Dec 2005 


crystal unit type AA-07[superseding IS:2916(Part 8)- 

1976] 



crystal unit type AA-08 [Superseding IS:2916(Part9)- 

1976] 




selection: Part 2 Series AA for Oscillators,Sec 9 Quartz 


1977] 


selection:Part 2 Series AA for Oscillators, Sec 10 

Quartz crystal unit type AA-10 


selection: Part 2 Series AA for Oscillators,Sec 11 



selection: Part 2 Series AAfor Oscillators, Sec 12 



selection: Part 2 Series AA for Osscillators, Sec 13 






selection Part 2 Series AAfor Oscillators, Sec 15 



selection: Part 2 Series AA for Oscillators, Sec 16 



selection: Part 2 Series AAfor Oscillators, Sec 17 



selection : Part 2 SeriesAA for Oscillators, Sec 18 



selection: Part 2 Series AA for Oscillators, Sec 19 


265 IS 8271(Part 2/Sec 20):1985 Quartz crystal units used of frequency control and Jan 2004 

selection Part 2:Series AA for Oscillators, Sec 20 



selection: Part 2 Series AA for Oscillators,Sec 21 






selection: Part 3 Series BC for Oscillators, Sec 1 Quartz 

crystal unit type BC-01 


selection: Part 3 SeriesBC for Oscillators, Sec 2 

Quartz crystal unit type BC-02 




selection : Part 3 Series BC for Oscillators, Sec 3 



selection:Part 3 Series BC for Oscillators,Sec 4 Quartz 

crystal unit type BC-04 


selection: Part 3 Series BCfor Oscillators,Section 5 


273 IS 8271(Part 3/Sec 6):1982 Quartz crysttal units used for frequency control and Dec 2005 

selection: Part 3 Series BC for Oscillators, Section 6 



selection: Part 3 Series BCfor Oscillators, Section 7 









selection: Part 4 Series ABfor Oscillators, Section 1 

Quartz crystal unit type AB-02 


selection: Part 4 Series ABfor Oscillators, Section 2 



selection: part 4 Series ABfor Oscillators, Section 3 



selection: Part 4 Series ABfor Oscillators,Section 4 



selection: Part 5 Series CXfor Oscillators, Section 1 

Quartz crystal unit type CX-01 

















Quartz crystal unit Type CX-06 


selection: Part 5 Series CXfor Oscillators, Sec 7 Quartz 

Crystal unit Type CX-07 


selection : Part 5 Series CX for Oscillators, Section 8 



selection: Part 5 Series CXfor Oscillators, Sec 9 Quartz 

crystal unit Type CX-09 


selection: Part 5 Series CXfor Oscillators, Sec 10 



selection:Part 5 Series CX for Oscillators, Sec 11 

Quartz crystal unit type CX - 11 





selection : Part 5 Series CX for Oscillators, Sec 13 



selection : Part 5 Series CX for Oscillators, Sec 14 




Quartz crystal unit type CX -15 


selection:Part 5 Series CX for Oscillators, Sec 16 






selection: Part 6 Series BFfor Oscillators, Section 1 

Quartz crystal unit type BF-01 








selection: Part 6 Series BFfor Oscillators, Sec 4 Quartz 

crystal unit type BF-04 









304 IS 8322:1976 Guide for drafting of performance specifications for cores Nov 2004 

| IEC 367-2(1974) of transformers andinductors for telecommunication 

305 IS 8426:2001 Measuring methods for properties of gyromagnetic Dec 2004 

/ IEC 60556(1982) materials intended for application at microwave 

frequencies (First Revision) 

306 IS 8454:1977 Guide for drafting of performance specifications for Jan 2003 

| IEC 392-1972 gyromagnetic materials foruse at microwave frequencies 

307 IS 8507(Part 1):1977 Fixed insulated hermetically sealed tantalum capacitors Dec 2005 

with solid electrolyte : Part 1 General requirements and 

methods of tests 

308 IS 8507(Part 2/Sec 1):1981 Fixed insulated hermatically sealed tantalum capacitors Dec 2005 

with solid electrolyte : Part 2 Type FCST 1, Sec 1 Polar 

309 IS 8507(Part 2/Sec 2):1982 Fixed insulated hermetically sealed tantalum capacitors Dec 2005 

with solid electrolyte : Part 2 Type FCST 1, Sec 2 Nonpolar 


with soild electrolyte : Part 3 Type FCST 2, Sec 1 Polar 


with solid electrolyte : Part 3 Type FCST 2, Sec 2 Nonpolar 


with solid electrolyte : Part 4 Type FCST 3, Sec 1 Polar 

313 IS 8644:2001 Strip-wound cut cores of grain oriented silicon iron alloy Aug 2004 

/ IEC 60329 (1985) (First Revision) 

314 IS 8645:1977 Dimensions of magnets for energy meters Jan 2003 

315 IS 8872(Part 1):1977 Variable resistors: Part 1 General requirements and Dec 2005 

| IEC 393-1(1970) methods of tests [superseding IS 2934(Part 1):1964] 

316 IS 8872(Part 2/Sec 1):1979 Variable resistors: Part 2 General purpose, Sec 1 Type Dec 2005 

VRG 1C 


VRG 2C 


VRG 3C 


VRG 4P 




VRG 5C 


VRG 6C 

322 IS 8872(Part 3/Sec 1):1979 

| JSS 50503 

Variable resistors: Part 3 Precision, Sec 1 Type VRG 1P Dec 2005 

323 IS 8872(Part 3/Sec 2):1979 

| JSS 50503 

Variable resistors: Part 3 Precision, Sec 2 Type VRP 2P Dec 2005 

324 IS 8872(Part 4/Sec 1):1980 Varriable resistors: Part 4 Preset, Sec 1 Type VRT 1P Dec 2005 

325 IS 8872(Part 4/Sec 2):1983 

| JSS 50504 

Variable resistors: Part 4 Preset, Sec 2 Type VRT 2P Dec 2005 

326 IS 8872(Part 4/Sec 3):1982 Variable resistors: Part 4 Preset, Sec 3 Type VRT 3 Dec 2005 



| JSS 50505 

329 IS 8909(Part 1):1978 Fiixed resistors , general purpose, power: Part 1 General Dec 2005 

| IEC 40(CO)331 requirements and methods of tests 

330 IS 8909(Part 2):1978 Fixed resistors, general purpose, power: Part 2 Type Dec 2005 

FRP 1 


FRP 2 


FRP 3 

333 IS 8909(Part 5):1978 Variable resistors, general purpose, power: Part 5 Type Dec 2005 

FRP 4 

334 IS 8943:1978 Guide to the design and use of components intended for Feb 2004 

| IEC 321 (1970) mounting on boards with printed wiring and printed 

circuits 

335 IS 9018(Part 1):2002 Quartz crystal controlled oscillators of assessed quality: 

/ IEC 60679-1(1997) Part 1 Generic specification (first revision) 

336 IS 9187(Part 1):1979 Deflection coil units used with TV picture tubes: Part 1 Jan 2004 1 

| JSS 54650 General requirements and tests 

337 IS 9187(Part 2):1980 Deflectionn coil units used with TV picture tubes: Part 2 Jan 2004 

Type DCU 1S for 470 mm, 510 mm, 590 mm and 610 

mm TV picture tubese tubes 

338 IS 9187(Part 3):1980 Deflection coil units used with TV picture tubes: Part 3 Jan 2004 

Type DCU1H for 470 mm, 510 mm, 590 mm and 610 

mmTV picture tubes 

339 IS 9187(Part 4):1980 Deflection coil units used with TV picture tubes: Part 4 Jan 2004 

Type DCU2S for 310 mm,and 340 mm - TV picture tubes 



340 IS 9187(Part 5):1998 Deflection coil units used with TV Picture tubes Part 5 Jan 2003 

Deflection coil units for use with colour picture tubes 

341 IS 9205(Part 1):1979 Directly heated negative temperature co-efficient Dec 2005 

| IEC 539(1976) thermistors: Part 1 General requirements and methods 

of tests 

342 IS 9229:1979 

| BS 75/22712 

Inductors for electromagnetic interference suppression Jan 2004 

343 IS 9256(Part 1):1979 

| IEC 384-2(1975) 

Fixed metallized polyester film dielectric capacitors: 

Part 1 General requirements and methods of tests 

Dec 2005 

344 IS 9256(Part 2):1979 Fixed metallized polyester film dielectric capacitors: Dec 2005 

| JSS 50204 Part 2 Type FCPM 2 

345 IS 9256(Part 3):1979 Fixed metallized polyester film dielectric capacitors: Dec 2005 

| JSS 50204 Part 3 Type FCPM 2 

346 * IS 9333:1979 Methods of measurement for cylinder, tube and screw Jan 2004 

| IEC 732 (1982) cores of magnetic oxides 

347 IS 9344:1979 Dimensions of toroidal strip-wound cores of magnetically Jan 2004 2 

| IEC 60635(1978) soft material 

348 IS 9414(Part 1/Sec 1):1979 Detail specification for digital integrated circuits: Part 1 Dec 2005 

Nand gate, TTL, Sec 1 Single, 8 input, positive 


Nand gate, TTL, Sec 2 Dual 4 input, positive 


Nand gate, TTL, Sec 3 Triple 3 input, positive 


Nand gate, TTL, Sec 4 Quad 2 input, positive 

352 IS 9437(Part 1):1979 Fixed precision resistors: Part 1 General requirements Dec 2005 

| IEC 115-5(1978) and methods of tests 

353 IS 9437(Part 2):1980 Fixed precision resistors: Part 2 Type FRPR 1 Dec 2005 



356 IS 9470:1979 Method of test for the usability of resistors under pulse Dec 2005 

| IEC 115-1 conditions 

357 IS 9501(Part 1):1980 Methods of measurements on electrical characteristics Dec 2005 

| IEC 147-2 of microcircuits: Part 1 Digital micro circuits 

358 IS 9501(Part 2):1980 Methods of measurements on electrical characteristics Dec 2005 

| IEC 147-2 of microcircuits: Part 2 Analogue microcircuits 

359 IS 9512:1980 Guidance for pulse testing of resistors Dec 2005 

| IEC 40(Sectt)361 



360 IS 9593(Part 1):1980 Plastic film dielectric variable tuning capacitors grade 2: Dec 2005 

| IEC418-2(1976) Part 1 Tests and general requirements 

361 IS 9596:1981 General requirements and classification of tests for Dec 2005 

| BS 9400:70&JSS51400 microcircuits 

362 IS 9614(Part 1):1980 Fixed high-meg resistors: Part 1 Type FRHM 1 Dec 2005 



365 IS 9638(Part 1):1980 Fixed polyester film dielectric capacitors for direct Dec 2005 

| IEC 40(CO)417 current : Part 1 General requirements and methods of 

tests (superseding IS:5361-1969) 


| JSS 50212 current: Part 2 Type FCPE1 





369 IS 9652:1980 Dimensions for magnetic oxide cores and associated Jan 2004 

| IEC 647(1979) coil formers for use in power supplies (EC-cores) 

370 IS 9653:1980 Tolerances on dimensions of tubes, pins and rods of Dec 2005 

| IEC 220(1966) magnetic oxides 

371 IS 9654:1993 Information on ferrite materials to be supplied by 

| IEC 60401(993) manufacturers of transformers and inductors cores (first 

Jan 2003 1 

revision) 

372 IS 9728:1981 Phase offset method for measurement of motional Jan 2004 

capacitance of quartz crystal units 

373 IS 9807:1981 

| IEC 147-4 

Life testing of digital microcircuits Dec 2005 

374 IS 9816:1981 

| BS 9300:88&JSS51300 

General requirements and classification of tests for 

semiconductor devices 

Dec 2005 

375 IS 9819(Part 1):1981 Line output transformers used with TV Picture tubes: Nov 2004 

| STQC SPCC Part 1 General requirements and tests 

376 IS 9819(Part 2):1982 Line output transformers (EHT) used with TV picture Jan 2003 

tubes: Part 2 Type LOT1S for 470 mm, 510 mm, 590 

mm and 610 mm TV picture tubes 


tubes: Part 3 Type LOT1H for 470 mm, 510 mm, 590 

mm and 610 mm TV picture tubes 


tubes: Part 4 Type LOT2S for 310 mm and 340 mm TV 

picture tubbes 


tubes: Part 5 LOT for colour picture tubes 



380 IS 9946:1981 Tests for magnetic properties of ferrite aerial rods Dec 2005 

[superseding IS:7431(Part 1)-1974 and IS 7431(Part 2)- 

1976] 

381 IS 10076(Part 1):1981 Linearity control units used with TV picture tubes: Part 1 Nov 2004 

General requirementsand tests 

382 IS 10087:1981 Code of practice for handling of electrostatic sensitive Dec 2005 

| IEC 47(CO)701 devices 

383 IS 10230(Part 1):1982 Specification for IF, RF transformers and inductors Jan 2004 

(coils): Part 1 General requirements and tests 

(Superseding IS:1512-1969) 

384 IS 10249(Part 1):1982 

| JSS 50650 

Voltage dependent resistors Dec 2005 

385 IS 10249(Part 2/Sec 1):1983 

| JSS 50651 

Voltage dependent resistors (varistors): Part 2 Low 

voltage, Sec 1 VDF 1 

Dec 2005 

386 IS 10249(Part 2/Sec 2):1983 Voltage dependent resistors (varistors): Part 2 Low Dec 2005 

| JSS 50651 voltage, Sec 2 VDS 1 

387 IS 10320:1982 General requirements and tests for axial lead cores Dec 2005 

| IEC 60701(1981) made of magnetic oxides or iron powder 

388 IS 10337:1982 32.768 KHz Quartz crystal units for wrist watches and Dec 2005 

standard values 

389 IS 10370(Part 1):1982 Dimensions of mounting accessories of pot cores for Nov 2004 

wired circuits:Part 1 For pot cores of size 26 x 16(mm) 


wired circuits: Part 2 For pot cores of size 18x11(mm) 


wired circuits: Part 3 For pot cores of size 18x14(mm) 

392 IS 10424:1982 Guide for design and use of printed boards Jul 2002 1 

393 IS 10477:1982 

| JSS 51400(Pt 2) 

Environmental testing procedures for microcircuits Jan 2005 

394 IS 10488(Part 1):1983 Frame output transformers used with TV picture Jan 2004 

tubes:Part 1 General requirements and tests. 

395 IS 10488(Part 2):1983 Frame output transformers used with TV picture tubes: Jan 2004 

Part 2 Type FOT 1H for 470 mm, 510 mm, 590 mm and 

610 mm 

396 IS 10825(Part 1):1975 Specification for ceramic dielectric capacitors type 1: Dec 2005 

Part 1 General requirements and methods of tests 

(superseding IS:1980-1967) 


Part 2 FCCT 1 


Part 3 FCCT 2 

399 IS 10922:1984 Copper foil for use in the manufacture of copper clad Jul 2002 1 

/ IEC 249-3A(1976) base materials 



400 IS 10991(Part 1):1984 Fixed metallized polypropylene film dielectric capacitors Dec 2005 

| IEC 384-16 : Part 1 General requirements and methods of tests 

401 IS 11013:1984 Piezoelectric ceramic elements (impact type and Dec 2005 

squeeze type) for gas lighters 

402 IS 11014(Part 1):1984 Piezoelectric ceramic materials:Part 1 General aspects Dec 2005 

and methods of measurement 

403 IS 11014(Part 2):1984 Piezoelectric ceramic materials: Part 2 Type 1 and Type Dec 2005 

5 

404 IS 11014(Part 3):1985 Piezoelectric ceramic materials: Part 3 Types 4 and 8 Jan 2004 

405 IS 11014(Part 4):1989 Piezoelectric ceramic material: Part 4 Type 5 H Dec 2005 

406 IS 11214:1984 Guide for repair of printed wiring boards Feb 2004 

407 IS 11296(Part 1):1985 Method for magnetic testing of TV fferrite components: Jan 2004 

Part 1 Flux measurement of beam centering magnet 

408 IS 11296(Part 2):1985 Method for magnetic testing of TV ferrite components: Jan 2004 

Part 2 Flux measurement of corner correction magnet 

409 IS 11296(Part 3):1985 Method for magnetic testing of TV ferrite components: Jan 2004 

Part 3 Flux measurement of pin cushion correction 

magnet 

410 IS 11299:1984 Guide for the selection and use of piezoelectric ceramic Dec 2005 

materials and elements 

411 IS 11334:1984 Methods of measurement for piezoelectric ceramic Dec 2005 

resonators and resonator unitsfor frequency control and 

selection 

412 IS 11392(Part 1/Sec 1):1985 Dimensions of mounting accessories of pot cores for Jan 2004 

printed circuit board mountings: Part 1 For pot core of 

size 18X11(mm), Sec 1 Type 1 



size 18 x 11 mm Section 2 Type 2 



size 26x16(mm), Sec 1 Type 1 

415 IS 11392(Part 2/Sec 2):1988 Dimensions of Mounting accessories of pot cores for Jan 2004 

printed circuit board mountings: Part 2 For Pot Core of 

size 26 x 16 (mm), Sec 2 Type 2 



size 30x19(mm), Sec 1 Type 1 

417 IS 11455(Part 1/Sec 1):1985 Outline dimensions of transformers and inductors for use Jan 2004 

| IEC 51(CO)249 in telecommunication and electronic equipment: Part 1 

Transformers & inductors using YEI-1 Laminations, Sec 

1 Universel mounting 



418 IS 11455(Part 1/Sec 2):1986 

| IEC 51(CO)249 

Outline dimensions of transformers and inductors for use Jan 2004 

in telecomnmunication and electronic equipment: Part 1 

Transformers & Inductors using YEI-1 Laminations: Sec 

2 U-clamp mounting 

419 IS 11455(Part 1/Sec 3):1985 Outline dimensions of transformers and inductors for use Jan 2004 

| IEC 51(CO)249 in telecommunication and electronic equipment: Part 1 

Transformers and inductors using YEI-1 

Laminations,Sec 3 Printed wiring board mounting 

420 IS 11455(Part 2):1988 Outline dimensions of transformers and inductors for use Jan 2003 1 

| IEC 60852-2(1992) in telecommunication and electronic equipment: Part 2 

Transformers and inductors using yEx-2 Laminations for 

printed wiring board mounting 

421 IS 11455(Part 3):2001 Outline dimensions of transformers and inductors for use Aug 2004 

/ IEC 60852-3(1992) in telecommunication and electronic equipment: Part 3 

Transformers and inductors using YUI-1 Laminations 

(First Revision) 

422 IS 11455(Part 4):1992 Outline dimensions of transformers & inductors for use 

| IEC 60852-5(1994) in telecommunication & electronic equipment:Part 4 

Dec 2005 1 

Transformers & inductors using Q series of C cores 

423 IS 11514:1985 Piezoelectric ceramic cartridge for impact type Jan 2004 

electronic gas lighters 

424 IS 11515(Part 1):1985 Fixed metallized polycarbonate film dielectric Dec 2005 

| IEC 40(CO)588 capacitors: Part 1 General requirements and methods of 

tests 

425 IS 11515(Part 2):1986 Fixed metallized polycarbonate film dielectric capacitors Dec 2005 

: Part 2 Type FCCM 1 

426 IS 11515(Part 3):1986 Fixed metallized polycarbonate film dielectric capacitors Dec 2005 

: Part 3 Type FCCM 2 

427 IS 11519:1985 Piezoelectric ceramic cartridge for squeeze type Jan 2004 

electronic gas lighters 

428 IS 11534(Part 1):1985 Specification for directly heated positive step function Dec 2005 

| IEC 738-1(1982) temperature co-efficient thermistors: Part 1 General 

requirements and methods of tests 

429 IS 11658:1986 General requirements and methods of tests of Jan 2004 

piezoelectric pressure transducers-dynamic type 

430 IS 11794(Part 1):1986 Laminations for transformers and inductors for use in 

| IEC 60740-1982 telecommunication and electronic equipment: Part 1 

Jan 2004 1 

General requirements and tests 

431 IS 11794(Part 2/Sec 1):1986 Laminations for transformers and inductors for use in Jan 2004 


Preferred ranges of laminations,Sec 1 Lamination Type 

YEI-1 



Preferred ranges of laminations, Sec 2 Lamination Type 

YEx-2 





Preferred ranges of laminations, Sec 3 Lamination 

typeYED-2 


| IEC 60740(1982) telecommunication and electronic equipment: Part 2 


typeYEx-3 



Preferred ranges of laminations, Sec 5 Lamination type 

YEx-4 



Preferred ranges of laminations, Sec 6 Lamination type 

YUI-1 




typeYM-1 

438 IS 11880:1986 Ceramic trilaminate elements used in phonograph pick- Jan 2004 

ups, ultrasonic transducers and similar devices 

439 IS 12032(Part 5):1993 Graphical symbols for diagrams in the field of Dec 2005 

/ IEC 617-5(1983) electrotechnology: Part 5 Semiconductors and electron 

tubes 


/ IEC 617-12(1983) electrotechnology:Part 12 Binarylogic elements 


/ IEC 617-13(1978) electrotechnology: Part 13 Analogue elements 

442 IS 12071:1987 Guide for assembly of printed boards Jul 2002 

| IEC 52(U.K.)169 

443 IS 12284:1988 Specificatiion for prepreg for use in multilayer printed Jul 2002 

| IEC 249-3-1(1981) boards 

444 IS 12641:2004 Semiconductor devices - Mechanical and climatic test 

/ IEC 60749:2002 methods (First Revision of IS 12641) 

445 IS 12825:1989 Piezoelectric ceramic elements for electronic buzzers - Dec 2005 

Specification 

446 IS 12970(Part 1):1990 Semiconductor devices - Integrated circuits: Part 1 Jan 2005 

| IEC 748-1 General 

447 IS 12970(Part 2/Sec 1):1992 Semiconductor devices - Integrated circuits : Part 2 Dec 2005 

| IEC 748-2 Digital integrated circuits essential ratings and 

characteristics, Sec 1 General 

448 IS 12970(Part 2/Sec 2):1992 Semiconductor devices - Integrated circuits: Part 2 Dec 2005 

| IEC 748-2 Digital integrated circuits- Essential ratings and 

characteristics, Sec 2 Integrated circuits memories 


| IEC 748-2 Digital integrated circuits- Essential ratings and 

characteristics,Sec 3 Integrated circuit microprocessos 




| IEC 748-2 Digital integrated circuits- Measuring methods, Sec 1 

General 


| IEC 748-2 Diigital integrated circuits - Measuring methods, Sec 2 

Static characteristics 


| IEC 748-2 Digital integrated circuits- Measuring methods, Sec 3 

Dynamic measurements 

453 IS 12970(Part 5/Sec 1):1991 Semiconductor devices - Integrated circuits : Part 5 Jan 2002 

| IEC 748-2 Analogue integrated circuits - Essential ratings and 

characteristics, Sec 1 General Format 



characteristics, Sec 2 Operational amplifiers 


| IEC 748-2 Analogue integrated circuit- Essential ratings and 

characteristics,Sec 3 Audio-amplifiers video-amplifiers 

and multichannel amplifiers for telecommunications 



characteristics, Sec 4 R.F. and I.F. amplifiers 



characteristics, Sec 5 Voltage and current regulators 



characteristics, Sec 6 Analogue signal switching circuits 


| IEC 748-2 Analogue integrated circuits - Measuring method, Sec 1 

General 


| IEC 748-2 Analogue integrated circuits - Measuring method, Sec 2 

Linear amplifiers 

461 IS 12970(Part 6/Sec 3):1992 Semiconductor devices - Integrated circuits :Part 6 Dec 2005 

| IEC 748-2 Analogue integrated circuits - Measuring methods, Sec 

3 Voltage regulator 


| IEC 748-2 Analogue integrated circuits - Measuring methods, Sec 

4 Analogue switching circuits 

463 ** IS 13310:1992 Dimensions of E-cores with rectangular cross-section Dec 2005 

| IEC 51 (Sectt)294 made of magnetic oxides intended for general 

applications 

464 IS 13342:2001 Dimensions of magnetic oxide cores intended for use in Dec 2004 

/ IEC 61185 (1992) power supply applications(first revision) 

465 IS 13388(Part 1):1992 Performance requirements and methods of test of TV Dec 2005 

ferrite components: Part 1 Ucore for line output 

transformer 




ferrite components: Part 2 Core for line driver transformer 


ferrite components: Part 3 Core for deflection coil 

468 IS 13412(Part 1):1992 Laminated core, package for transformers and inductors Dec 2005 1 

| IEC 1021-1(1990) used in telecommunication and electronic equipment: 

Part 1 Dimensions 

469 IS 13412(Part 2):1998 Laminated core packages for transformers and inductors Jan 2003 

| IEC 1021-2 (1995) used in telecommunication and electronic equipment: 

Part 2 Electrical characteristics 

470 IS 13413(Part 1):1992 Designation for cores and assemblies for transformers Dec 2005 1 

and inductors for used intelecommunication and 

electronic equipment: Part 1 Laminated cores 

471 IS 13504:1992 

/ IEC 60440(1973) 

Method of measurement of non-linearity in resistors Dec 2005 

472 IS 13554:1992 

/ IEC 60294(1969) 

Measurement of the dimensions of a cylindrical 

component having two axial terminations 

Dec 2005 

473 IS 13562:1992 

| IEC 824 

Terminology related to microprocessors Dec 2005 

474 IS 13669:1993 

| IEC 249-3-3 (1991) 

Permanent polymer coating materials (solder-resist) for 

use in the manufacture of printed circuits - Specification 

Jul 2002 

475 IS 13674(Part 1):1998 Dimensions of ferrite components for CTV: Part 1 Cores Jan 2003 

for deflection coil - [IS 13674(Part 1): 

476 IS 13674(Part 2):1993 Dimensions of ferrite components for CTV: Part 2 Cores Jan 2003 2 

for line output transformers 

477 IS 13674(Part 3):1993 Dimensions of ferrite components for CTV: Part 3 Cores Jan 2003 

for SMPS transformers 

478 IS 13898:1993 Dimensions of Coil Formers of Transformers & Inductors Jan 2003 

| IEC 51(Sectt)238 for use in Telecommunication and electronic equipment 

479 IS 13909:1993 Dimensions for PM Cores made of magnetic oxides and Jan 2003 1 

| IEC 1247(1995) associated Parts 

480 IS 14498:1998 Dimensions of EP cores made of magnetic oxides and Jan 2003 

| IEC 61596 (1995) associated parts 

481 IS 14870:2000 Transformers & inductors for use in electronic & Jan 2003 

| IEC 1007(1994) telecommunication equipment - Measuring methods 

and test procedures 

482 IS 14901(Part 1):2001 Semiconductor Devices - Discrete Devices and Jan 2004 

/ IEC 60747-1(1983) integrated circuits: Part 1 General 

483 IS 14901(Part 2):2001 Semiconductor devices discrete devices and integrated Oct 2004 

/ IEC 60747-2(2000) circuits, Part 2 : Rectifier diodes 

484 IS 14901(Part 3):2001 Semiconductor devices discrete devices and integrated Jan 2004 

/ IEC 60747-3(1985) circuits, Part 3: Signal diodes (including switching 

diodes) and regulator diodes 



485 IS 14901(Part 4):2004 

/ IEC 60747-4 (2001) 

Semiconductor Devices - Discrete devices - Part 4 

Microwave devices[Superseding IS 3700(Part 9):1972, IS 

4400(Part 9/Sec 1):1974 & IS 4400(Part 9/Sec 2:1974] 

486 IS 14901(Part 5):2004 Semiconductor devices - Discrete devices and integrated 

/ IEC 60747-5 (1992) circuits - Part 5 Optoelectronic devices 

487 IS 14901(Part 7):2001 Semiconductor devices, Discrete devices and integrated Feb 2004 

/ IEC 60747-7(1988) circuits Part 7: Bipolar transistors 

488 IS 14901(Part 8):2001 Semiconductor devices - Discrete devices and Feb 2004 

/ IEC 60747-8(1984) integrated circuits Part 8: Field-effect transistors 

489 IS 14924:2001 Electrotechnical Vocabulary: Part 44 Piezoelectric Feb 2004 

/ IEC 60050-561(1991) devices [First Revision of IS 1885(Part 44):1978] 

490 IS 15204:2002 Microwave ferrite components - measuring methods for Feb 2005 

/ IEC 61830 (1997) major properties 

491 IS 15212:2002 Specification and characterization methods for non 

/ IEC/PAS 62212 woven 'E' glass mat 

492 IS 15213:2002 Specification and characterization methods for non 

/ IEC/PAS 62213 woven para-aramid reinforcement 

493 IS 15214:2002 Generic requirements for implementation of product 

/ IEC/PAS 62119 manufacturing description data and transfer methodology 

494 IS 15215:2002 Performance guide manual for single and double-sided 

/ IEC/PAS 62123 flexible printed wiring boards 

495 IS 15252:2002 

/ IEC/PAS 62214 

Generic performance specification for printed boards 

496 IS 15479:2004 

/ IEC/PAS 62293 

Qualification and performance specification for high 

density interconnect (HDI) layers or boards 

497 IS 15544:2004 Guide to measurement of equivalent electrical 

/ IEC 61080(1991) parameters of quartz crystal units 


1 DOC.LITD 5(1951) Ferrite cores-guide on the limits of surface irregularities: 

Part 1 General specification 


1 DOC.LITD 5(726) Fixed inductors for radio interference suppression : Part 

1 Test and measurement procedures (Renumbering of 

Doc: LTD 8(726) 

2 DOC.LITD 5(1981) Methods of measurement for cylinder, tube and screw 

/ IEC 732-1982 cores of magnetic oxides (First revision of IS 9333) 




PRODUCT 214 



TERMINOLOGY 10 

DIMENSIONS 86 

SYMBOLS 7 

OTHERS 91 

TOTAL : 497 



LITD 6 WIRES, CABLES, WAVEGUIDES & 

ACCESSORIES 

SCOPE - To prepare Indian Standards on LF and RF wires and cables (having metallic 

conductors) and waveguides and accessories, intended for use in electronics 

and telecommunication equipment and in devices employing similar 

techniques. 


IEC/TC 46 Cables, wires, waveguides, RF and microwave passive components 

IEC/SC 46A Coaxial Cables 

IEC/SC 46C Wires and symmetric cables 

IEC/SC 46F RF and microwave passive components 



Date Amd. 

1 IS 1885(Part 56):1981 

| IEC 60050(726) 

Electrotechnical vocabulary: Part 56 Microwave Jun 2006 

components and accessories [superseding IS 1885(Part 

13/Sec 1):1968 and IS 1885(Part 13/Sec 2):1967] 

2 IS 2032(Part 20):1977 Graphical symbols used in electrotechnology: Part 20 Jun 2006 

| IEC 117 Series Radio communication transmission circuits, lines and 

accessories 

3 IS 4493(Part 1):1979 Hollow metallic wave guides: Part 1 General Jun 2006 

| IEC 60153-1(1964) requirements and tests (first revision) 

4 IS 4493(Part 2):1981 Hollow metallic waveguides: Part 2 Ordinary rigid Jun 2006 

| IEC 60153-2 (1974) rectangular waveguides 

5 IS 4493(Part 3):1982 Hollow metallic waveguides: Part 3 Medium flat rigid Jun 2006 

| IEC 60153-6 (1967) rectangular waveguides 

6 IS 4493(Part 4):1982 Hollow metallic waveguides: Part 4 Flat rigid rectangular Jun 2006 

| IEC 60153-3 (1964) waveguides 

7 IS 4493(Part 6):1982 Hollow metallic waveguides:Part 6 Rigid square Jun 2006 

| IEC 60153-7 (1972) waveguides 

8 IS 4493(Part 7):1983 Hollow metallic waveguides:Part 7 Circular waveguides Jun 2006 

| IEC 60153-4(1973) 

9 IS 5026:1987 General requirements and tests for radio frequency Jun 2006 

| IEC 60096-1(1986) cables (first revision) 

10 IS 5608(Part 1):1991 LF Wires and cables with PVC insulation and PVC Jun 2006 

| IEC 60189-1(1986) Sheath : Part 1 General requirements test and 

measuring methods (first revision) 

11 * IS 5608(Part 2):1970 LF wires and cables with PVC insulation and PVC Mar 2005 

| IEC 60189-3(1965) sheath: Part 2 Equipment Wires,single 

12 IS 5608(Part 4):2000 LF Wires and cables with PVC insulation and PVC Jun 2006 

| IEC 189-2(1981) sheath: Part 4 Cables for indoor installations (first 

revision) 

13 IS 5608(Part 5):2002 LF Wires and cables with PVC insulation and PVC Feb 2005 

| IEC 189-6(1982) sheath: Part 5 Signalling cables (first revision) 



14 IS 5608(Part 6):2001 LF Wires and cables with PVC insulation and PVC Dec 2004 

| IEC 189-7(1971) sheath:Part 6 Jumper Wires (first revision) 

15 IS 5662:1991 TV Aerial Feeder Cables (first revision) Mar 2005 

| IEC 96-2 

16 IS 5801(Part 1):1970 Flexible coaxial radio frequency cables with Mar 2005 

| IEC 60096-2(1961) characteristic impedance 50 ohms Part 1 Cables Type 

50-3-1 


| IEC 60096-2(1961) characteristic impedance 50 ohms Part 2 Cable Type 

50-3-2 


| IEC 60096-2(1961) characteristic impedance 50 ohms:Part 3 Cable Type 

50-7-1 


| IEC 60096-2(1961) characteristic impedance 75 ohms:Part 1 Cable Type 

75-7-1 


| IEC60096-2(1961) characteristics impedance 75 ohms:Part 2 Cable Type 

75-7-2 

21 IS 8080:1976 

| ASTM B 298-74 

Silver coated copper wire Mar 2005 1 

22 IS 9566:1980 

| IEC 60197(1965) 

High tension connecting wires for use in television 

receivers 

Mar 2005 1 

23 IS 9567:2001 Tin or tin-lead coated copper wire (first revision) Jun 2004 

| ASTM B 189(1985) 

24 IS 9817:1992 Sealing test for pressurized waveguide tubing and Jun 2006 

/ IEC 60261:1989 assemblies (first revision) 

25 IS 9938:1981 Recommended colours for PVC insulation for LF wires Mar 2005 

| IEC60 304(1978) and cables 

26 IS 9941:1981 Guide to calculation of resistance of plain and tinned Mar 2005 

| IEC 60344(1980) copper conductors of lowfrequency cables and wires 

27 IS 9943:1981 Characteristics impedances and dimensions of radio Mar 2005 

| IEC 60078(1967) frequency coaxial cables 

28 IS 10579:1983 Polyethylene (PE) insulation and sheath of Mar 2004 1 

telecommunication cables 

29 IS 10738(Part 1):1983 Flanges for waveguides: Part 1 General requirements Mar 2004 

| IEC 60154-1(1982) and tests 

30 IS 10738(Part 2/Sec 1):1990 Flanges for waveguides: Part 2 Flanges for ordinary Mar 2005 

| IEC60154-2(1980) rectangular waveguides, Sec1 General 


| IEC 60154-2(1980) rectangular waveguides, Sec2 Flange Type A 


| IEC 60154-2(1980) rectangular waveguides, Sec3 Flange Type B 


| IEC 60154-2(1980) rectangular waveguides, Sec4 Flange Type C 




| IEC 60154-2(1980) rectangular waveguides, Sec5 Flange Type D 


| IEC 60154-2(1980) rectangular waveguides, Sec6 Flange type E 

36 IS 10738(Part 3/Sec 1):1991 Flanges for waveguides: Part 3 Flanges for flat Mar 2005 

| IEC 60154-3 (1974) rectangular waveguides, Sec 1 General 

37 IS 10738(Part 3/Sec 2):1991 Flanges for waveguides:Part 3 Flanges for flat Mar 2005 

| IEC 60154-3 (1974) rectangular waveguides, Sec 2 Flange type G 

38 IS 10738(Part 4/Sec 1):1991 Flanges for waveguides: Part 4 Flanges for circular Mar 2005 

| IEC 60154-4(1969) waveguides , Sec 1 General 

39 IS 10738(Part 4/Sec 2):1992 Flanges for waveguides: Part 4 Flanges for circular Mar 2005 

| IEC60154-4(1969) waveguides, Sec 2 Flange type J 

40 IS 10738(Part 5/Sec 1):1991 Flanges for waveguides: Part 5 Flanges for medium flat Mar 2005 

| IEC 60154-6 (1983) rectangular waveguides, Sec 1 General 


| IEC 60154-6(1983) rectangular waveguides,Sec 2 Flange type L 


| IEC60154-6(1983) rectangular waveguides, Sec 3 Flange type N 

43 IS 10738(Part 6/Sec 1):1991 Flanges for waveguides: Part 6 Flanges for square Mar 2005 

| IEC 60154-7 waveguides, Sec 1 General 

44 IS 10738(Part 6/Sec 2):1992 Flanges for waveguides:Part 6 Flanges for square Mar 2005 

| IEC 60154-7(1974) waveguides, Sec 2 Flange type K 

45 IS 11295:1985 

| JSS 53200 

General purpose waveguide directional couplers Mar 2005 

46 IS 11892:1986 

| IEC 60649(1979) 

Method of calculation of maximum external diameter of 

cables for indoor installations 

Mar 2005 

47 IS 11967(Part 1/Sec 1):1987 RF Coaxial cables: Part 1 Solid Polyethylene, Section 1 Jun 2006 

| MIL-C-17(119G-RG174 Flexible Type R50-2-A01 

48 IS 11967(Part 1/Sec 2):1987 RF Coaxial Cables: Part 1 Solid Polyethylene, Section 2 Jun 2006 

| MIL-C-17/20C-RG058 Flexible Type R50-3-A02 







52 IS 11967(Part 2/Sec 1):1989 RF Coaxial cables: Part 2 Polyethylene (Semi- Jun 2006 

solid)cables, Section 1 Type R 75-5-B100 

53 IS 11967(Part 2/Sec 2):1989 RF Coaxial cables:Part 2 Polyethylene (Semi-solid) Jun 2006 

cables, Section 2 Type 2 Type R 120-7.5-B101 

54 IS 11967(Part 2/Sec 3):1989 Specification for radio frequency coaxial cables: Part 2 Jun 2006 

Polyethylene (semi-solid) cables, Section 3 Type R150- 

5-B102 



55 IS 11967(Part 3/Sec 1):1988 Radio frequency coaxial cables: Part 3 Solid Jun 2006 

| MIL-C-17/113C-RG316 extruded/Tape wrapped PTFE, Section 1 Flexible, Type 

R50-2-F01 

56 IS 11967(Part 3/Sec 2):1988 Radio frequency coaxial cables: Part 3 Solid Jun 2006 

| MIL-C-17/60C-RG142 extruded/Tape wrapped PTFE, Section 2 Flexible, Type 

R50-3-F02 

57 IS 11967(Part 3/Sec 3):1988 Radio frequency coaxial cables:Part 3 Solid Jun 2006 

| MIL-C-17/111B-RG303 extruded/Tape Wrapped PTFE, Section3 Flexible, Type 

R50-3-F03 

58 IS 11967(Part 3/Sec 4):1989 Radio frequency flexible coaxial cables:Part 3 Solid Jun 2006 

extruded/Tape wrapped PTFE,Section 4 Flexible,Type 

R75-2-F04 

59 IS 11967(Part 3/Sec 5):1989 

| MIL-C-17/110C-RG302 

Radio frequency flexible coaxial cables: Part 3 Solid 

extruded/Tape wrapped PTFE, Section 5 Flexible, R75- 

Jun 2006 

4-F05 

60 IS 11967(Part 3/Sec 6):1989 Radio frequency flexible coaxial cables:Part 3 Solid Jun 2006 

| MIL-C-17/950-RG180 extruded/Tape wrapped PTFE,Section 6 Flexible, Type 

R95-3-F06 

61 IS 12598:1989 Thermoplastic cables for communication, Jun 2006 

instrumentation and control 

62 ** IS 13176:1991 PVC insulation and sheath of telecommunication cables Mar 2005 

63 IS 13246:1992 Guide for choosing modular dimensions for waveguide Jun 2006 

/ IEC 60374:1971 components 

64 IS 13248:1992 

/ IEC 60636(1979) 

Flexible waveguide assembly performance Jun 2006 

65 IS 13667:1993 Conductors for electronics and telecommunication Jun 2006 1 

applications: Tinsel conductors 

66 IS 13873:1993 Specification for rigid waveguide assemblies Jun 2006 1 

| JSS 5307:1976 

67 IS 14131(Part 1):1994 Radio frequency cables: Part 1 General requirements Mar 2004 

| IEC 60096-3(1982) and tests for single-unit coaxial cables for use in cabled 

distribution systems 

68 * IS 14131(Part 2):1995 Radio frequency cables: Part 2 Particular requirements Mar 2004 

for single-unit coaxial cables for use in cabled 

distribution system 

69 IS 14438:1997 Audio cords and cordages for telecommunication Mar 2005 

specification 

70 IS 14450(Part 1):1997 Conductors in electronic applications: Part 1 Bare Mar 2005 

copper round 

71 IS 14493(Part 1):1997 Multicore and symmetrical pair/quad cables for digital Mar 2005 

/ IEC 61156-1(1994) communications: Part 1 Generic specification 

72 IS 14521:1998 PVC Insulated Ribbon Cables with a Pitch of 1.27 mm Jun 2006 

/ IEC 60918 (1987) Suitable for Insulation Displacement Termination 

73 IS 14630:1999 Guide for designing detail specifications of radio Jun 2006 

/ IEC 60096-0-1 (1990) frequency coaxial cables 



74 IS 14686(Part 1):2006 Radio frequency and coaxial cable assemblies Part 

/ IEC 60966-1(1999) 1:Generic specification-General requirements and test 

methods (first revision) 

75 IS 14686(Part 2/Sec 1):1999 Radio frequency and coaxial cable assemblies: Part 2 Jun 2006 

/ IEC 60966-2-1(1991) Sectional specification for flexible coaxial cable 

assemblies, Section 1 General 

DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT 

1 DOC.LITD 6(1755) Specification for low frequency wire and cables with PVC 

insulation and PVC sheath: Part 2 Equipment wires, 

single [First Revision of IS 5608(Part 2)-1970] 


1 DOC.LITD 6(2068) Coaxial communication cables - Part 1: Generic 

/ IEC 61196-1 (2005) Specification - General, definitions and requirements 

2 DOC.LITD 6(2069) Coaxial communication cables - Part 1-100: Electrical 

/ IEC 61196-1-100(05) test methods - General requirements 


/ IEC 61196-1-101(05) test methods - Test for conductor d.c resistance of cable 


/ IEC 61196-1-102(05) test methods - Test for insulation resistance of cable 

dielectric 


/ IEC 61196-1-103(05) test methods - Test for capacitance of cable 


/ IEC 61196-1-104(05) test methods - Test for capacitance stability of cable 


/ IEC 61196-1-105(05) test methods - Test for withstand voltage of cable 

dielectric 


/ IEC 61196-1-107(05) test methods - Test for cable microphony charge level 

(mechanically induced noise) 


/ IEC 61196-1-108(05) test methods - Test for characteristic impedance, phase 

and group delay, electrical length and propagation 

velocity 


/ IEC 61196-1-111(05) test methods - Test for stability of phase constant 

11 DOC.LITD 6(2078) Coaxial communication cables - Part 1-112Electrical 

/ IEC 61196-1-112(06) test methods - Test for return loss (uniformity of 

impedance) 


/ IEC 61196-1-115(06) test methods - Test for regularity of impedance 

(pulse/step function return loss) 

13 DOC.LITD 6(2080) Coaxial communication cables - Part 1-122:Electrical 

/ IEC 61196-1-122(06) test methods - Test for cross-talk between coaxial cables 



14 DOC.LITD 6(2081) Coaxial communication cables - Part 1-200: 

/ IEC 61196-1-200(05) Environmental test methods General Requirements 

15 DOC.LITD 6(2082) Coaxial communication cables- Part 1-206: 

/ IEC 61196-1-206(05) Environmental test methods Climatic sequence 

16 DOC.LITD 6(2083) Coaxial communication cables - Part 1-301:Mechanical 

/ IEC 61196-1-301(05) test methods - Test for ovality 

17 DOC.LITD 6(2084) Coaxial communication cables - Part 1-302: Mechanical 

/ IEC 61196-1-302(05) test methods - Test for eccentricity 


/ IEC 61196-1-308(05) test methods -Test for tensile strength and elongation 

for copper-clad metals 


/ IEC 61196-1-310(05) test methods - Test for torsion characteristics of copperclad 

metals 


/ IEC 61196-1-314(06) test methods - Test for bending 


/ IEC 61196-1-316(05) test methods -Test of maximum pulling force of cable 


/ IEC 61196-1-317(06) test methods -Test for crush resistance of cable 


/ IEC 61196-1-324(06) test methods -Test for abrasion resistance of cable 


1 DOC.LITD 6(1986) Multicore and symmetrical pair/quad cables for digital 

/ IEC 601156-1(1994) communications Part 1 Generic Specification 

2 DOC.LITD 6(1984) Radio frequency cables:Part 2 Particular requirements 

for sinlge-unit coaxial cables for use in cabled 

distribution 

(first revision of IS 14131(Part 2)) 


PRODUCT 59 



TERMINOLOGY 1 

DIMENSIONS 1 

SYMBOLS 1 

OTHERS 5 

TOTAL : 75 



LITD 7 Audio, Video And Multimedia Systems & Equipments 

SCOPE - To prepare Indian Standards in the field of audio, video and multimedia 

systems and equipment. ( Multimedia is the integration of any form of audio, 

video, graphics, data and telecommunication and integration including the 

production, storage, processing, transmission, display and reproduction of 

such information). B) To prepare Indian standards on acoustics, 

electroacoustics and related instrumets. The scope also includes safety 

requirements of these items. 

CORRESPONDING IEC/ISO COMMITTEE 

IEC/TC 29 Electroacoustics 

IEC/TC 100 Audio, Video and Multimedia System and Equipment 

IEC/TC 108 Safety of Electronic Equipment within the field of audio, video, 

information technology and communication technology 



Date Amd. 

1 IS 615:1996 Radio receivers for amplitude modulation broadcast Jan 2004 

transmission - Specification(Second Revision) 

2 IS 616:2003 Safety requirements for mains operated electronic and 

/ IEC 60065(2001) related apparatus for household and similar general use 

(Third revision) 

3 IS 1881:1998 Code of practice for installation of indoor amplifying and Dec 2005 

sound distribution systems (first revision) 

4 IS 1882:1993 Code of practice for outdoor installation of public address Dec 2005 

system (first revision) 

5 IS 1885(Part 3/Sec 1):1965 Electrotechnical vocabulary: Part 3 Acoustics, Sec 1 Jan 2004 

| IEC 60050-8(1960) Physical acoustics 


| IEC 60050-8(1960) Acoustical and electro-acoustical systems 


| IEC 60050-8(1960) Sonics, ultrasonics and underwater acoustics 


| IEC 60050-8(1960) Speech and hearing 


| IEC 60050-8(1960) Acoustical instruments 


| IEC 60050-8(1960) Music 


| IEC 60050-8(1960) Architectural acoustics 

12 IS 1885(Part 22):1967 Electrotechnical vocabulary: Part 22 Equipment for radio Jan 2004 

| IEC 600 50(60) communications, transmitting and receiving 

13 IS 1885(Part 24):1967 Electrotechnical vocabulary: Part 24 Broadcasting, Jan 2004 

| IEC 60050(60) sound and television 

14 IS 1885(Part 48/Sec 1):1978 Electrotechnical vocabulary: Part 48 Recording, Sec 1 Jan 2004 1 

| IEC 60050(806) Tape recording [superseding IS 1885(Part 3/Sec 3):1967] 



15 IS 1885(Part 48/Sec 2):1978 Electrotechnical vocabulary: Part 48 Recording, Sec 2 Jan 2004 

| IEC 60050(806) Disk recording [superseding IS 1885(Part 3/Sec 3):1967] 

16 IS 1885(Part 68):1989 Electrotechnical Vocabulary: Part 68 Surface Acoustic Dec 2005 

| IEC 60050(806) Wave (SAW) Filters 

17 IS 2032(Part 12):1969 Graphical symbols used in electrotechnology : Part 12 Jan 2004 

| IEC/TC3(C.O.)487&518 Electroacoustic transducers and recording and 

reproducing systems 

18 IS 2264:1963 

| ISO RECMN. NO. 402 

Preferred frequencies for acoustical measurements Dec 2005 

19 IS 2382:1970 

| IEC 60124(1960) 

Recommended mounting dimensions of loudspeakers 


Mar 2004 

20 IS 3397:1978 Community radio receivers (first revision) Feb 2003 1 

21 IS 3956:1967 Dimensions and spools for magnetic tapes for sound Mar 2004 1 

| IEC 60094(1960) recording and reproduction 

22 IS 4377:1981 General requirements for magnetic sound tape recording Mar 2004 

| IEC60A(CO)54&(sct)77 and reproducing systems (first revision) 

23 IS 4479:1981 Methods of measurement on magnetic tapes for sound Mar 2004 

| IEC 60094-5 recording and reproduction (first revision) 

24 IS 4480(Part 1):1967 Magnetic tapes for sound recording and reproduction : Mar 2004 

Part 1 Domestic grade 

25 IS 4480(Part 2):1987 Magnetic tapes for sound recording and reproduction: Dec 2005 

Part 2 Professional grade (Reel-to-Reel) (first revision) 

26 * IS 4545(Part 1):1983 Methods of measurement on receivers for television Feb 2003 

| IEC 60107-1(1977) broadcast transmissions: Part 1 General considerations 


27 * IS 4545(Part 2):1983 Methods of measurement on receivers for television Feb 2003 

| IEC 60107-1(1977) broadcast transmissions: Part 2 Tuning properties and 

general requirements (first revision) 

28 ** IS 4545(Part 3):1983 Methods of measurement on receivers for television Feb 2003 

| IEC 60107-1(1977) broadcast transmissions: Part 3 Geometrical properties 

of the picture (first revision) 

29 ** IS 4545(Part 4):1983 Methods of measurement on receivers for television Feb 2003 

| IEC 60107-1(1977) broadcast transmissions: Part 4 Synchronizing quality 


30 IS 4545(Part 5):1983 Methods of measurement on receivers for television Feb 2003 

| IEC 60107-1(1977) broadcast transmissions: Part 5 Sensitivity (first revision) 


| IEC 60107-1(1977) broadcast transmissions: Part 6 Selectivity and 

response to undesired signals (first revision) 


| IEC 60107-1(1977) broadcast transmissions: Part 7 Fidelity (first revision) 




| IEC 60107-1(1977) broadcast transmissions:Part8 Compatibility with audio 

visual recording equipment (first revision) 


| IEC 60107-2(1980) broadcast transmissions: Part 9 Electrical and acoustic 

measurements at audio frequencies (first revision) 


/ IEC 60107-06(1989) broadcast transmissions: Part 11 Measurement under 

conditions different from broadcast signal standards 

36 IS 4545(Part 12):2000 Recommended methods of measurements on receivers Feb 2003 

/ IEC 60107-5(1999) for television broadcasting transmissions: Part 5 

Electrical measurements on multichannel sound 

television receivers using the NICAM two-channel digital 

sound-system 

37 IS 4547:1992 Receivers for monochrome television broadcast Feb 2003 1 

transmission (third revision) 

38 IS 6370:1981 Mechanical and dimensional requirements of audio tape Mar 2004 

| IEC 60A(co)53 cassettes for domestic use (first revision) 

39 IS 6391:1981 Magnetic and ceramic phonograph pick-ups (first Mar 2004 

| IEC 60098(1964) revision) 

40 IS 6759:1996 Radio receivers for frequency modulation broadcast Jan 2004 

transmission - Specification(First Revision) 

41 IS 6964:2001 Electroacoustics - Octave-band and fractional-octave- Feb 2004 

/ IEC 61260(1995) band filters (First revision) 

42 IS 7068:1973 

| IEC 60A(Sectt)41 

Specification for 6.25 mm calibration tape Dec 2005 1 

43 IS 7136:1973 Specification for megaphones Mar 2004 

44 IS 7594(Part 1):1978 Magnetic sound tape recording and reproducing Mar 2004 

| IEC 60A(co)43 equipment (cassette): Part 1 Methods of measurement 

(revised) 

45 IS 7594(Part 2):1979 Magnetic sound tape recording and reproducing Mar 2004 1 

equipment (cassette): Part 2 Domestic type (first 

revision) 

46 IS 7741(Part 2):1975 Specification for loudspeakers: Part 2 Direct radiator Mar 2004 

moving coil loudspeakers(superseding IS 1033:1957) 

47 IS 7741(Part 3):1975 Specification for loudspeakers: Part 3 Pressure unit Mar 2004 

operated horn loudspeakers(superseding IS 1032:1957) 

48 IS 8152:1976 Methods of measurement of speed fluctuations in sound Mar 2004 1 

| IEC 60386-1972 recording and reproducing equipment 

49 IS 8159:1993 Scales and sizes for plotting frequency characteristics Dec 2005 

| IEC 60263(1975) and polar diagrams (first revision) 

50 IS 8225:1987 Measurement of sound absorption in a reverberation Dec 2005 

/ ISO 354(1985) room (first revision) 



51 IS 8234:1976 Spools for magnetic tapes for sound recording and Mar 2004 2 

| W-R175B:1967(US SCT) reproduction 

52 IS 8655(Part 1):1977 Magnetic sound tape recording and reproducing Mar 2004 2 

equipment (reel-to-reel): Part 1Methods of measurement 

53 IS 8655(Part 3):1977 Magnetic sound tape recording and reproducing Mar 2004 

| IEC 60A(CO)43 equipment (reel-to-reel): Part 3 Professional type 

54 IS 9031:1992 Teleprinter paper page rolls (first revision) Feb 2003 1 

55 IS 9098:1979 

| IEC 17765&IEC178-65 

Specification for pure tone audiometers Mar 2004 

56 IS 9167:1979 

| ANSIS3.19:74 

Specification for ear protectors Dec 2005 1 

57 IS 9272(Part 1):1979 

| IEC 60098(1964) 

Disk record playing equipment : Part 1 Record player Mar 2004 

58 IS 9272(Part 2):1979 

| IEC 60098(1964) 

Disk record playing equipment : Part 2 Amplifiers and 

loudspeakers 

Mar 2004 1 

59 IS 9302(Part 3):1981 

| IEC 60268-4 

Characteristics and methods of measurements for sound Mar 2004 

system equipment: Part 3 Microphones (superseding IS 

2748:1964) 

60 IS 9302(Part 7):1987 Characteristics and methods of measurements for Dec 2005 

| IEC 60268-8(1973) sound system equipment: Part 7Automatic gain control 

devices 

61 IS 9302(Part 9/Sec 1):1980 Characteristics and methods of measurements for sound Mar 2004 

| IEC 60268-10(1976) system equipment: Part 9 Programme level meters, 

Sec 1 General 


| IEC 60268-10(1976) system equipment: Part 9 Programme level meters, 

Sec 2 Peak programme meters, Type 1 


| IEC 60268-10A(1976) system equipment: Part 9 Programme level meters, 

Sec 3 peak programme meters, Type 2 

64 IS 9305:1979 Specification for processed disk records Mar 2004 1 

65 IS 9551(Part 1):2001 Specification for high-fidelity audio equipment and Dec 2004 

| IEC 60581-1(1977) systems: Minimum performance requirements Part 1 

General (First revision) 

66 IS 9551(Part 2):1983 Specification for high-fidelity audio equipment and Mar 2004 

| IEC 2B(CO)54 systems: Part 2 Amplifiers 

67 IS 9551(Part 3):2002 Specification for high-fidelity audio equipment and 

/ IEC 60581-7(1986) systems: Minimum performance requirements Part 3 

Loudspeakers (First revision) 

68 IS 9551(Part 4):1980 High fidelity audio equipment and systems: Part 4 Mar 2004 

| IEC 60581-3 Record playing equipment and cartridges 



69 IS 9551(Part 5):1980 High fidelity audio equipment and systems: Part 5 Mar 2004 

Magnetic sound tape recording and reproducing 

equipment 

70 IS 9551(Part 6):2001 Specification for high-fidelity audio equipment and Nov 2004 

/ IEC 581-5(1981) systems: Minimum performance requirements Part 6 

Microphones (First revision) 

71 IS 9702:1980 Magnetic tape for cassettes for sound recording and Mar 2004 1 

| IEC 60A(Sectt)56&57 reproduction 

72 IS 9729:1981 Methods of measurement of disk record playing Mar 2004 

| IEC 98A-1972 equipment 

73 IS 9793(Part 1/Sec 1):1992 Antennas for the reception of sound and television Feb 2003 

| IEC 60597-1(1977) broadcasting in the frequency range 30 MHz to 1 GHz : 

Part 1 Methods of measurement, Sec 1 Electrical & 

mechanical characteristics (first revision) 


| IEC 60597-2(1977) broadcasting in the frequency range 30 MHz to 1 

GHz:Part 1 Methods of measurement, Sec 2 Methods of 

tests of electrical performance parameters[first revision] 


| IEC 60597-3(1983) broadcasting in the frequencyrange 30 MHz to 1 

GHz:Part 1 Methods of measurement, Sec 3 Methods of 

tests formechanical properties and environmental tests 


76 IS 9793(Part 2/Sec 1):1991 Antennas for the reception of sound and television Sep 2004 

| IEC 60597-4(1983) broadcasting in the frequencyrange 30MHz to 1 Ghz: 

Part 2 Requirements Sec 1 Guide for the preparation of 

aerial performance specification [First Revision] 

77 IS 9876:1981 Guide to the measurement of airborne acoustical noise Mar 2004 

| ISO 2204-1973 and evaluation of its effects on man 

78 ** IS 9887:1981 Guidance on subjective listening tests Sep 2004 

| IEC 60543:1976 

79 IS 9901(Part 1):1981 Measurement of sound insulation in buildings and of Mar 2004 

| ISO/DIS 140/I building elements: Part 1 Requirements for laboratories 


| ISO/DIS 140/II building elements: Part 2 Statement of precision 

requirements 


| ISO/DIS 140/III building elements: Part 3 Laboratory measurements of 

airborne sound insulation of building elements 


| ISO/DIS 140/IV building elements: Part 4 Field measurements of 

airborne sound insulation between rooms 


| ISO/DIS 140/V building elements: Part 5 Field measurements of 

airborne sound insulation of facade elements and facades 



84 IS 9901(Part 6):1981 Measurement of sound insulation buildings and building Mar 2004 

| ISO/DIS 140/VI elements: Part 6 Laboratory measurements of impact 

sound insulation of floors 


| ISO/DIS 140/VII building elements: Part 7 Field measurements of impact 

sound insulation of floors 


| ISO/DIS 140 VIII building equipments: Part 8 Laboratory measurements of 

the reduction of transmitted impact noise by floor 

coverings on a standard floor 


| ISO/DIS 140/9 building elements: Part 9 Laboratory measurement of 

room to room airborne sound insulation of a suspended 

ceiling with a plenum above it 

88 IS 10351:1982 

| IEC 503-75&ISO1860& 

Spools for 25.4 mm video magnetic tape Dec 2005 

89 IS 10426:1983 Public address amplifiers (superseding IS 1490:1959 Dec 2005 

and IS 1819:1961) 

90 IS 10467:1983 Listening test on loudspeakers Dec 2005 

91 IS 10557:1983 

| BS 3880(Part 1):1971 

Teleprinter paper tape rolls Feb 2003 1 

92 IS 10565:1999 

| IEC 60645-2(1993) 

Diagnostic audiometers (First revision) Dec 2005 

93 IS 10662:1992 Receivers for colour television broadcast transmission Feb 2003 2 


94 IS 10700:1983 Methods of measurement for magnetic tapes for video Mar 2004 

| IEC 60B(CO)44 recording and reproduction 

95 IS 10775:1984 Specification for body level hearing aids (superseding IS Mar 2004 3 

4406:1967 & IS 4482:1967) 

96 IS 10776(Part 1):1984 Methods of measurement of electro-acoustical Mar 2004 

| IEC 60118-0(1983) characteristics of hearing aids: Part 1 General 

measurements for air-conduction hearing aids 

(superseding IS 3641:1976) 


/ IEC 60118-1(1983) characteristics of hearing aids: Part 2 Additional 

measurements for hearing aids with induction pick-up 

coil input 


| IEC 60118-2(1983) characteristics of hearing aids: Part 3 Additional 

measurements for hearing aids with automatic gain 

control circuits 


| IEC 29(CO)133 characteristics of hearing aids: Part 4 Aid with bone 

vibrator 

100 IS 10779:1984 Provisional reference coupler for the calibration of Mar 2004 

/ IEC 60303(1970) earphones used in audiometry 



101 IS 10781:1984 Reference coupler for the measurement of hearing aids Mar 2004 

/ IEC 60126(1973) using earphones coupled to the ear by means of ear 

inserts 

102 IS 10879:1984 Dimensions of nipples for insert earphones Mar 2004 

/ IEC 60118-5(1983) 

103 IS 11024:1984 Standard reference zero for the calibration of pure-tone Mar 2004 

| ISO/DP 7566 bone conduction audiometers and guidelines for its 

practical application 

104 IS 11025:1984 Symbols and other markings on hearing aids and related Mar 2004 

/ IEC 60118-11(1983) equipment 

105 IS 11136:1984 Methods of measurement for video tape recording and Mar 2004 

| IEC 60698 reproducing equipment 

106 IS 11361:1984 Interconnection between video tape recorders and Mar 2004 

| IEC 60608 television receivers for 50 Hz, 625 lines systems 

107 IS 11449:1985 

| IEC 29C (CO)50 

Mechanical coupler for measurement on bone vibrators Mar 2004 

108 IS 11453:1985 

| CCIR SYSTEM B 

Characteristics of systems for monochrome and colour Sep 2004 

television 

109 IS 11456(Part 1):1985 

| IEC 29B(Sectt)218 

Conference systems: Part 1 General Mar 2004 

110 IS 11456(Part 2):1987 

| IEC 84(CO)18 

Conference system: Part 2 Electrical requirements Dec 2005 

111 IS 11700:1986 

| IEC 60602(1980) 

Type B helical video recorders Mar 2004 

112 IS 11718(Part 1):1986 Characteristics and methods of measurement for audio- Mar 2004 

visual video and television equipment and systems: Part 

1 General 

113 IS 11728:1986 Code for installation space including connections for car Sep 2004 

| ISO 7736(1984) radio for front installation 

114 IS 11889:1987 Booths for simultaneous interpretation - General Dec 2005 

/ ISO 2603-1983 characteristics and equipment 

115 IS 11975:1987 Methods of measurements for multichannel television Feb 2003 

tuners 

116 IS 12193(Part 1):1989 Methods of measurement for radio receivers for various Feb 2003 

| IEC 60315-1(1988) classes of emission: Part 1 General considerations and 

methods of measurements including audio 

frequencymeasurement 

117 IS 12193(Part 2):1987 Methods of measurement on radio receivers for various Feb 2003 

| IEC 60315-3(1989) classes of emission: Part2 Radio frequency 

measurements on receivers for amplitude modulated 

sound broadcast emissions 

118 * IS 12193(Part 3):1994 Methods of measurement on radio receivers for various Feb 2003 

/ IEC 60315-4:1982 classes of emissions: Part 3 Radio frequency 

measurements on receivers for frequency modulated 

sound broadcasting emissions 



119 IS 12236:1987 Paper page rolls for adding machines/calculators Feb 2003 

120 IS 12274:1987 Safety requirements for electronic flash apparatus for Feb 2003 

/ IEC 60491 (1984) photographic purposes 

121 IS 12429(Part 1):1988 Time and control code for video tape recorders: Part 1 Dec 2005 

| IEC 60461 Longitudinal time code (LTC) 

122 IS 12429(Part 2):1988 Time and control code for video tape recorders: Part 2 Dec 2005 

| IEC 60461 Vertical-Interval Time Code (VITC) 

123 IS 12431:1988 Helical-scan video tape cassette system using 12.65 Dec 2005 

mm magnetic tape on type VHS 

124 IS 12997(Part 1):1990 Television signal booster:Part 1 Wide band VHF range Feb 2003 

125 IS 13215:1991 Specification for portable/personal transreceivers Feb 2003 

126 IS 13420(Part 1):2002 Cabled distribution system for Television & Sound 

/ IEC 60728-1(2001) Signals Part 1 - Methods of meausrement and system 

performance (second revision) 

127 IS 13696:1993 Interconnection of radio and TV receivers Feb 2003 

/ IEC 61022:1989 

128 IS 13986(Part 1):1994 Methods of measurement on receivers for satellite Feb 2003 

/ IEC 61079-1:1992 broadcast transmissions in the 12 GHz band : Part 1 

Radio frequency measurements on outdoor units 

129 IS 13986(Part 2):1994 Methods of measurement on receivers for satellite Feb 2003 

/ IEC 61079-2:1992 broadcast transmissions in the 12 GHz band: Part 2 

Electrical measurements on DBS tuner units 

130 * IS 13987(Part 1):1994 Methods of measurements on Receiving antennas for Sep 2004 

/ IEC 61114-1:1992 satellite broadcast transmission in the 12 GHz band, 

Part 1 Electrical measurements on DBS receiving 

antennas 

131 IS 13987(Part 2):1994 Methods of measurement on receiving antennas for Feb 2003 

| IEC 61114-2 satellite transmission :Part 2Mechanical and 

environmental measurements on DBS receiving 

antennas 

132 IS 14230:1995 C-Band parabolic Dish Antenna - Specification Jan 2004 

133 IS 14231(Part 1):1995 Cabled distribution systems for television and sound Dec 2005 

| IEC 60728 Series signals: Part 1 Safety requirements 

134 IS 14231(Part 3):1995 Cabled distribution systems for television and sound Jan 2004 

| IEC 60728-3 signals: Part 3 Active coaxial wideband distribution 

components 


| IEC 60728-4 signals: Part 4 Passive coaxial wideband distribution 

components 


| IEC 60728-5 signals: Part 5 Headend 



137 IS 14231(Part 7):1999 Cabled distribution system for television and sound Sep 2004 

| IEC 60728-12 signals: Part 7 Electromagnetic compatibility of systems 

138 IS 14231(Part 8):2002 Cabled distribution system for television and sound Dec 2005 

/ IEC 60728-10(2001) systems : Part 8 system performance of return path 

139 IS 14231(Part 9):2002 Interfaces of cabled distribution systems for digitally Dec 2005 

/ IEC 60728-9(2000) modulated signals 

140 IS 14231(Part 10):2003 Cabled distribution systems for Television & Sound Oct 2003 

/ IEC 60728-6(2001) Signals - Part 6 Optical Equipment 

141 IS 14264:1995 Satellite signal distribution on cabled distribution system Jan 2004 

| IEC 60728 Series 

142 IS 14265:1995 Satellite receivers - Specificiation Jan 2004 

143 IS 15059:2001 

/ IEC 60942(1997) 

Electroacoustics - Sound Calibrators Dec 2004 

144 IS 15244:2002 Analog Set Top Box - Specification Dec 2005 1 

145 IS 15245:2002 Digital Set Top Box - Specification Dec 2005 1 

146 IS 15377:2003 Digital Set-top Box for Direct to Home Services Jun 2003 

147 IS 15482:2004 Microphones and earphones for speech communications 

/ IEC 61842 (2002) 

148 IS 15572:2005 Audio, Video & Audiovisual System - Interconnection & 

/ IEC 61938(1996) Matching Values - Preferred values of Analogue Signals 

(Superseding IS 9302(Part 10:1980) 

149 IS 15575(Part 1):2000 Electroacoustics - Sound level meters - Part 1: 

/ IEC 61672-1(2002) Specifications (Superseding IS 9779:1981) 

150 IS 15575(Part 2):2000 Electroacoustics - Sound level meters - Part 2: Pattern 

/ IEC 61672-2(2003) evaluation tests(Superseding IS 9779:1981) 

151 IS 15596(Part 1):2005 Sound system equipment Part 1 : General 

/ IEC 60268-1(1985) (Superseding IS 9302 Part 1(1979) 

152 IS 15596(Part 2):2005 Sound System Equipment Part 2 Explanation of general 

/ IEC 60268-2(1987) terms and Calculation Methods (superseding IS 

9302(Part 1):1979) 

153 IS 15596(Part 3):2005 Sound System Equipment Part 3 Amplifiers 

/ IEC 60268-3(2000) (Superseding IS 9302(Part 2):1979 

154 IS 15596(Part 5):2005 Sound system equipment Part 5 :Loudspeakers 

/ IEC 60268-5(2003) (Superseding IS 9302(Part 4):1993) 

155 IS 15596(Part 7):2005 Sound system equipment Part 7 :Headphones and 

/ IEC 60268-7(1996) Earphones (Superseding IS 9302(Part 6):1987) 




1 DOC.LITD 7(1921) Methodos of measurement on receivers for television 

/ IEC 60107-1 brroadcast transmissions: Part 1 General considerations 

[Second revision of IS 4545(Part 1):1983] 

2 DOC.LITD 7(1922) Methods of measurement on receivers for television 

/ IEC 60107-1 broadcast transmissions: Part 2 Tuning properties and 

general requirements [Second revision of IS 4545(Part 

2):1983] 

3 DOC.LITD 7(2035) 

/ IEC 60958-1(2004) 

Digital Audio Interface - Part 1 General Jan 2000 

4 DOC.LITD 7(2036) 

/ IEC 60958-3(2003) 

Digital Audio Interface - Part 3 Consumer applications 

5 DOC.LITD 7(2037) Digital audio interface Part 4 Professional applications 

(TA4) 


1 DOC.LITD 7(2034) Methods of Measurement on Receivers for Satellite 

/ IEC 61079-3(1993) Broadcast Transmissions in the 12 GHz Band Part 3: 

Electrical measurements of overall performance of 

receiver systems comprising an outdoor unit and a 

DBVS tuner unit 


1 DOC.LITD 7(1859) Methods of measurement on radio receivers for various 

classes of emission Part 3 radio frequency 

measurements on receiver for frequency modulated 

sound broadcasting emission [First Revision of IS 

12193(Pt 3):1994] 

2 DOC.LITD 7(1923) Characteristics of DAB (Digital Audio Broadcast 

/ IEC 62104 Receivers) 

3 DOC.LITD 7(1990) Methods of measurement on receiving antennas for 

/ IEC 61114-1 satellite broadcast transmission in 12 GHz band Part 1 

Electrical measurement on DBS receiving antennas 

{First revision of 13987(Part 1):1994} 


PRODUCT 57 




DIMENSIONS 4 

SYMBOLS 1 

OTHERS 22 

TOTAL : 155 



LITD 8 ELECTRONIC MEASURING INSTRUMENTS, SYSTEMS AND ACCESSORIES 

SCOPE - To prepare Indian Standards for electronic measuring instruments, systems 

and accessories for measurement, generation, test and analysis of electrical 

quantities including nuclear instrumentation 


IEC/SC 45A Reactor Instrumentation 

IEC/SC 45B Radiation Protection Instrumentation 

IEC/TC 85 Measuring Equipment for Electromagnetic Quantities 

ISO/TC 85 Nuclear Energy 

ISO/TC 85/SC 2 Radiation Protection 

ISO/TC 85/SC 5 Nuclear Fuel Technology 



Date Amd. 

1 IS 1885(Part 47):1977 Electrotechnical vocabulary: Part 47 Digital electronic Jan 2004 

| IEC 485(1974) equipment 

2 * IS 1885(Part 63):1985 Electrotechnical vocabulary: Part 63 Nuclear Jan 2004 

/ IEC 60050-391(1975) instrumentation 

3 IS 2320:1963 Methods of measurements for amplitude modulated Aug 2003 2 

| IEC 60106 frequency signal generators (30kHz to 30 MHz) 

4 IS 2321:1963 Requirements for general purpose amplitude modulated Aug 2003 1 

radio frequency signal generators (30 kHz to 30 MHz) 

5 IS 3437:1972 General requirements for direct reading pointer indicator Aug 2003 

| IEC 217-1967 type electronic voltmeter (first revision) 

6 IS 3886:1966 Minimum requirements for general purpose audio Aug 2003 

frequency signal generators (30 Hz to 30 kHz) 

7 IS 3915:1966 Methods of measurements on audio frequency signal Aug 2003 

generators (30 Hz to 30 kHz) 

8 IS 4330:1967 Methods of measurements on cathode ray oscilloscope Aug 2003 

(DC to 10 MHz) 

9 IS 4755:1987 Reference zero for the calibration of pure tone air Dec 2005 1 

| ISO 389:1991 conduction audiometers (first revision) 

10 IS 6229:1980 Methods for measurement of real ear protection of Mar 2004 

| ANSI S3.19(1974) hearing protectors and physical attenuation of earmuffs 


11 IS 6700:1972 Requirements for general purpose cathode-ray Aug 2003 

oscilloscope 

12 IS 6756:2001 Technical documentation to be supplied with electronic Mar 2004 

/ IEC 61187(1993) measuring equipment (First Revision) 

13 IS 6767(Part 1):1972 Direct reading pointer indicator type ac/dc electronic Aug 2003 

voltmeter: Part 1 Methods of measurements 


| IEC 217(1967) voltmeter: Part 2 Up to 30 MHz 




| IEC 217(1967) voltmeter: Part 3 Upto 300 MHz 

16 IS 6769(Part 1):1972 Direct reading pointer indicator type ac electronic Aug 2003 

millivoltmeter: Part 1 Methods of measurements 

17 IS 6769(Part 2):1972 Direct reading pointer indicator type ac electronic Aug 2003 

| IEC 217(1967) millivoltmeter: Part 2 Witha frequency range of 2 Hz to 1 

MHz 

18 IS 7194:1994 Assessment of noise exposure during work for hearing Dec 2005 

/ ISO 1999(1990) conservation purposes (First revision) 

19 IS 7709:1975 Specification for standard hydrophone in the frequency Mar 2004 1 

| IEC 60500(1974) range 1 Hz to 100 kHz 

20 IS 8146:1976 Methods of measurement of reverberation time in Dec 2005 

| ISO 3382(1975) auditoria 

21 IS 8290:1976 General purpose audio frequency output power meters Aug 2003 

22 IS 8573:1977 Digital electronic dc voltmeters and dc electronic Aug 2003 

| IEC 485-1974 analogue-to-digital converters 

23 IS 9176:2001 Method for specifying the functional performance of the Mar 2004 

| IEC 60359(1971) electronic measuring equipment (First Revision) 

24 IS 9177:1979 Method for specifying the functional performance of Aug 2003 

| IEC 443-1974 stabilized power supply apparatus 

25 IS 9281(Part 1):1979 Electronic weighing systems: Part 1 Terms and Dec 2005 

definitions 

26 IS 9281(Part 2):1979 Electronic weighing systems: Part 2 Methods of Dec 2005 

measurements 

27 IS 9281(Part 3):1981 Electronic weighing systems: Part 3 Requirements Dec 2005 1 

28 IS 9281(Part 4):1983 Electronic weighing systems: Part 4 Code of practice for Dec 2005 

use and installation 

29 IS 9285(Part 1):1979 Direct reading pointer indicator type ac electronic RF Aug 2003 

millivoltmeter: Part 1 Methods of measurements 

30 IS 9285(Part 2):1979 Direct reading pointer indicator type ac electronic RF Aug 2003 

millivoltmeter: Part 2 Requirements 

31 IS 9298(Part 1):1979 Television pattern generators: Part 1 Requirements Aug 2003 

32 IS 9298(Part 2):1980 Television pattern generators: Part 2 Methods of Aug 2003 

measurements 

33 IS 9711:1980 Synchronizing pulse generator Aug 2003 

34 IS 9741(Part 1):1981 Video test signal generator: Part 1 Methods of Dec 2005 

measurements 

35 IS 9741(Part 2):1981 Video test signal generator: Part 2 Requirements Dec 2005 



36 IS 9782:1981 Television sweep generators Dec 2005 

37 IS 9858:1981 Safety requirements for electronic measuring apparatus Dec 2005 

| IEC 348-1978 

38 IS 9989:1981 Assessment of noise with respect to community Mar 2004 

| ISO/R 1996(1971) response 

39 IS 10211(Part 1):1982 Standard signal generator in the frequency range (30 Aug 2003 

MHz - 500 MHz): Part 1 Methods of measurements 

40 IS 10211(Part 2):1982 Standard signal generator in the frequency range (30 Aug 2003 

MHz - 500 MHz) : Part 2 Performance requirements 

41 IS 10423:1982 

| IEC 29C(CO)43 

Personal sound exposure meter Dec 2005 

42 IS 10656:1983 Insulation resistance tester (Electronic type) Aug 2003 1 

43 IS 10767(Part 1):2001 Programmable measuring instruuments - Interface Mar 2004 

/ IEC 60625-1(1993) system(byte serial bit parallel) : Part 1 Functional, 

electrical and mechanical specifications and 

requirements for the designer and user (First Revision) 

44 IS 10767(Part 2):2001 Programmable measuring instruments interface system Mar 2004 

/ IEC 60625-2(1993) (byte serial bit parallel): Part 2 Codes, formats, 

protocols and common commands(First revision) 

45 IS 11017:1984 

/ IEC 60548-1976 

Expression of properties of sampling oscilloscopes Dec 2005 

46 IS 11018(Part 1):1984 

/ IEC 60351-1(1976) 

Expression of properties of cathode-ray oscilloscopes: 

Part 1 General 

Aug 2003 

47 IS 11018(Part 2):1984 Expression of properties of cathode-ray oscilloscopes: Aug 2003 

/ IEC 60351-2(1976) Part 2 Storage oscilloscopes 

48 IS 11051:1984 Methods of measurement for television sweep Aug 2003 

generators 

49 IS 11148:1984 Expression of the properties of spectrum analyzers Dec 2005 

| IEC 60714(1981) 

50 IS 11423:1985 Portable prospecting radiation meters with Geiger-Muller Mar 2004 

/ IEC 60421(1973) counter tube (Linear scale instruments) 

51 * IS 11424:1985 Portable prospecting radiation meters with gamma-ray Mar 2004 

/ IEC 60460(1974) scintillation detectors (Linear scale instruments) 

52 * IS 11425:1985 Test procedures for semiconductor charged particle Mar 2004 

/ IEC 60333(1983) detectors 

53 IS 11547(Part 1):1985 Electronic weighing in-motion systems: Part 1 Aug 2003 

Terminology and design rules 

54 IS 11547(Part 2):1985 Electronic weighing in-motion systems: Part 2 Aug 2003 

Requirements 



55 IS 11547(Part 3/Sec 1):1985 Electronic weighing in-motion systems: Part 3 Methods Aug 2003 

of tests, Sec 1 Simulted tests 

56 IS 11547(Part 3/Sec 2):1985 Electronic weighing in-motion systems: Part 3 Methods Aug 2003 

of tests, Sec 2 Site tests 

57 IS 11600:1985 Index of electrical measuring apparatus used in Mar 2004 

/ IEC 181 & 181B(1966) connection with ionizing radiation 

58 IS 11645:1985 Test procedures for amplifiers and preamplifiers for Mar 2004 

/ IEC 60340(1979) semiconductor detectors for ionizing radiation 

59 IS 11796:1985 D.C. periodmeters Mar 2004 

/ IEC 60295(1969) 

60 IS 11797:1985 Radiation detectors for instrumentation and protection of Mar 2004 

/ IEC 60515(1975) nuclear reactors 

61 IS 11798:1985 Definition of test method terms for semiconductor Mar 2004 

/ IEC 60596(1978) radiation detectors and scintillation counting 

62 * IS 11866:1987 Alpha, beta alpha-beta contamination meters and Dec 2005 

/ IEC 60325(1981) monitors 

63 * IS 11868:1987 Constructional requirements of nuclear instruments to Dec 2005 

/ IEC 60405(1972) afford personal protection against ionizing radiation 

64 IS 11869:1987 Hand and/or foot contamination monitors and warping Dec 2005 

/ IEC 60504(1975) assemblies 

65 * IS 11886:1987 

/ IEC 60659(1979) 

Test methods for multichannel amplitude analyzers Dec 2005 

66 IS 12126:1987 Hand held metal detectors (frisking) for use in weapons Dec 2005 

detection 

67 IS 12275:1987 Standard for time-to-amplitude convertors for Dec 2005 

/ IEC 60741(1982) multichannel amplitude analyzers 

68 IS 12350:1987 

/ IEC 60776(1983) 

Expression of the properties of logic analyzers Dec 2005 

69 IS 12421:1988 

| ANSI/IEEEn 42-15(80) 

Performance verification of liquid scintillation counting 

systems 

Mar 2004 

70 IS 12509:1988 

| ANSI/IEEE 309(1970) 

Test procedure for geiger-muller counters Mar 2004 

71 IS 12705:1989 

| IEC 60528(1975) 

Expression of performance of air quality infrared 

analyzers 

Dec 2005 

72 IS 12737:1988 Standard test procedure for semiconductor X-ray energy Dec 2005 

/ IEC 60759(1983) spectrometers 

73 * IS 12761(Part 1):1989 Equipment for continuously monitoring radioactivity in Dec 2005 

/ IEC 60761-1(1983) gaseous effluents : Part 1 General requirements 

74 * IS 12761(Part 2):1989 Equipment for continuously monitoring radioactivity in Dec 2005 

/ IEC 60761-2(1983) gaseous effluents: Part 2 Specific requirements for 

aerosal effluent monitors 



75 * IS 12761(Part 3):1989 

/ IEC 60761-3(1983) 

Equipment for continuously monitoring radioactivity in Dec 2005 

gaseous effluents: Part 3 Specific requirements for noble 

gas effluent monitors 

76 * IS 12761(Part 4):1989 

/ IEC 60761-4(1983) 

Equipment for continuously monitoring radioactivity in Dec 2005 

gaseous effluents:Part 4 Specific requirements for iodine 

monitors 

77 IS 12771:1989 General characteristics for nuclear reactor Dec 2005 

/ IEC 60232(1976) instrumentation 

78 IS 12772:2003 Application of computers to nuclear reactor 

| IEC 60643 & 61226 instrumentation and control (First revision) 

79 IS 12857:1989 General principles for the creation of graphicals symbols Dec 2005 

/ IEC 60416(1988) for use on equipment 

80 IS 12930:1991 

/ IEC 60231(1967) 

General principles of nuclear reactor instrumentation Mar 2004 

81 IS 12957:1992 

| IEC 66 D(C.O.)12 

Expression of performance of sample handling system 

for fluids 

Dec 2005 

82 IS 13875(Part 1):1993 Digital measuring instruments for measurement & Dec 2005 

| IEC 66(Sec)49 control: Part 1 General specifications concerning terms, 

tests & data sheet details 


| IEC 66 (Sec)50 control: Part 2 Terms, tests & data sheet details of 

instruments for measuring analog quantities 


| IEC 66(Sec)51 control: Part 3 Terms, tests & data sheet details of 

instruments for measuring digital quantities 

85 IS 13881:1993 

/ IEC 60973(1989) 

Test Procedures for Germanium gamma-ray detectors Dec 2005 

86 IS 13883:1993 

/ IEC 61066(1991) 

Thermoluminescence Dosimetry systems for personal 

and environmental monitoring 

Dec 2005 

87 IS 13897:1993 In-core instrumentation for neutron fluence rate [flux] Dec 2005 

| IEC 60568(1977) measurements in power reactors 

88 IS 14132:1995 Walk through metal detectors for use in weapons Aug 2003 

detection 

89 IS 14189:1994 Expression of the properties of frequency counters (Upto Dec 2005 

a frequency of 1 GHz) 

90 IS 14481(Part 1):1998 Radiation monitoring equipment for accident and post Dec 2005 

/ IEC 60951-1(1988) accident conditions in nuclear power plants: Part 1 

General requirements 

91 IS 14501(Part 1):1998 Pulse techniques and apparatus Part 1 Pulse terms and Dec 2005 

| IEC 60469-1(1987) definitions 

92 IS 14501(Part 2):1998 Pulse techniques and apparatus Part 2 Pulse Dec 2005 

| IEC 60469-2 (1987) measurement and analysis, general considerations 

93 IS 14527:1998 Expression of the performance of pulse generators Dec 2005 

| IEC 60624 (1978) 



94 IS 14888:2000 Performance requirements of VSWR meter Dec 2003 

95 IS 14989:2001 Recommended practices for seismic qualification of Sep 2004 

/ IEC 60980(1989) electrical equipment of the safety system for nuclear 

generating stations 

96 IS 15398:2003 Software for computers in the safety systems of nuclear 

| IEC 60880(1986) and radiation facilities 

97 IS 15399:2003 Hardware for computers in the safety system of 

| IEC 60987(1989) nuclear and radiation facilities 


1 DOC.LITD 8(2033) Panel mounted equipment - Electrical measuring 

/ IEC 61554(1999) instruments - Dimensions for panel mounting 

2 DOC.LITD 8(2038) Nuclear Instrumentation – Constructional requirements 

/ IEC 60405:2003 and classification of radiometric gauges (First Revision 

of IS 11868:1987) 

3 DOC.LITD 8(2039) Radiation Protection Instrumentation- Alpha, Beta and 

/ IEC 60325:2002 Alpha/Beta (Beta Energy>60 keV) Contamination 

Meters and Monitors(First Revision of IS 11866:1984) 

4 DOC.LITD 8(2040) Nuclear Instrumentation – Semiconductor Doc Charged- 

/ IEC 60333:1993 Particle Detectors – Test Procedures (First Revision of 

IS 11425:1985) 

5 DOC.LITD 8(2041) Nuclear Instrumentation - Multichannel Pulse Height 

/ IEC 61342:1995 Analyzers – Main Characteristics, Technical 

Requirements and Test Methods(First 

Revision/supeseding of IS 11886:1987) 

6 DOC.LITD 8(2042) Electrotechnical vocabulary: Physical phenomenon and 

/ IEC 60050-393:2000 basic concepts -Nuclear instrumentation (First Revision 

/Superseding IS 1885(Part 63):1985) 

7 DOC.LITD 8(2043) Portable Gamma Radiation Meters and Spectrometers 

/ IEC 61239:1993 used for Prospecting – Definitions, Requirements and 

Calibration (First Revision/Superseding IS 

11424:1985) 

8 DOC.LITD 8(2044) Equipment for Continuous Monitoring of Radioactivity in 

/ IEC 60761-1:2002 Gaseous Effluents:Part 1 General requirements) (First 

Revision of IS 12761 (Part 1):1989) 

9 DOC.LITD 8(2045) Equipment for Continuously Monitoring Radioactivity in 

/ IEC 60761-2:2002 Gaseous Effluents:Part 2 Specific requirements for 

radioactive aerosol monitors including transuranic 

aerosols (First Revision of IS 12761 (Part 2):1989 



radioactive noble gas monitors (First Revision of 

IS 12761 (Part 3:1989) 



radioactive iodine monitors (First Revision of IS 12761 

(Part 4):1989) 




PRODUCT 30 



TERMINOLOGY 6 

SYMBOLS 1 

OTHERS 28 

TOTAL : 97 

INDICATES STANDARDS UNDER REVISION 

** INDICATES STANDARDS TO BE REVISED 


LITD 9 ELECTROMAGNETIC COMPATIBILITY 

SCOPE - To prepare Indian Standards relating to: 

a)Electromagnetic compatibility of electrical and/or electronic equipment, 

between themselves and with electrical power networks including 

electromagnetic interference. 

b) Measurement and calculation methods to assess human exposure to 

electric, magnetic and electromagnetic fields. 


IEC/TC 77 Electromagnetic Compatibility 

IEC/SC 77A Low Frequency Phenomena 

IEC/SC 77B High Frequency Phenomena 

IEC/SC 77C High Power Transient Phenomena 

IEC/TC 106 Methods for the assessment of Electric, 

Magnetic and Electromagnetic fields associated wih human 

exposure 

CISPR International Special Committee on Radio Interference. 



Date Amd. 

1 IS 1885(Part 36):1972 

| CISPR(C.O.)1020 

Electrotechnical vocabulary: Part 36 Interference Feb 2003 

2 IS 1885(Part 85):2003 

/ IEC60050(161) 

Electrotechnical vocabulary - Electromagnetic 

compatibility 

3 IS 6873(Part 1):1999 Limits and methods of measurements of radio Feb 2003 

/ CISPR 12(1997) disturbance characteristics : Part 1 Vehicles, 

Motorboats and spark - ignited engine - driven devices 

(second revision) 

4 IS 6873(Part 2):1999 Limits and methods of measurements of Radio Feb 2003 

/ CISPR 14(1993) disturbance characteristics : Part 2 Electrical motor 

operated and thermal appliances for household and 

similar purpose electrical tools and electric apparatus 

[first revision ] 

5 IS 6873(Part 3):1999 

/ CISPR 13(1996) 

Limits and methods of measurements of Radio Feb 2003 

disturbance characteristics :Part 3 Sound and television 

broadcast receivers and associated equipment [first 

revision] 


/ CISPR 11(1997) disturbance characteristics Part 4 Industrial, scientific 

and medical (ISM) radio frequency equipment [first 

revision] 


/ CISPR 15(1996 ) disturbance characteristics : Part 5 Electrical lighting 

and similar equipment [first revision] 


/ CISPR 22(1997) disturbance characteristics Part 7 Information 

technology equipment [first revision] 

9 IS 8880:1978 Specification for filter units for electromagnetic Jan 2004 

| BS 613 interference suppression 



10 IS 8912:1978 Methods of measurement of the suppression Jan 2004 

| CISPR/A(Sectt)13 characteristics of electromagnetic interference filters 

11 IS 10052(Part 1):1999 Specification for radio disturbances and immunity Feb 2003 

/ CISPR 16-1(1993) measuring apparatus and methods: Part 1 Radio 

disturbance and immunity measuring apparatus (first 

revision ) 

12 IS 10052(Part 2):1999 

/ CISPR 16-2(1996) 

Specification for radio disturbances and immunity 

measuring apparatus and methods: Part 2 

Feb 2003 

Methods of measurement of disturbances and immunity 

(first revision ) 

13 IS 10564:1983 Recommended practice for minimization of Feb 2003 

electromagnetic interference from radio frequency 

heating equipment 

14 IS 12233(Part 1/Sec 1):1987 Electromagnetic interference characteristics of overhead Feb 2003 

| CISPR 18-1(1982) powerlines and high voltage equipment: Part 1 

Description of phenomena: Sec 1 Radio noise from 

power lines 


| CISPR 18-1(1982) power lines and high-voltage equipment: Part 1 

Description of phenomena: Sec 2 Effects of corona from 

conductors 



Description of phenomena: Sec 3 Radio noise levels due 

to insulators fittings and sub-station 

equipment(excluding bad contacts) 


| CISPR 18-1(1982) power lines and high-voltage equipment:Part 1 

Description of phenomena, Sec 4 Sparking due to bad 

contacts 



Description of phenomena,Sec 5 Special dc effects 

19 IS 12233(Part 2):1993 Electromagnetic interference characterstics of overhead Feb 2003 

/ CISPR 18-2(1986) power lines and high voltage equipment: Part 2 Methods 

of measurement and procedure for determining limits 

20 IS 12233(Part 3):1993 Electromagnetic interference characteristics of overhead Feb 2003 

/ CISPR 18-3(1986) power lines and high voltage equipment: Part 3 Code of 

practice for minimizing the generation of radionoise 

21 IS 12552:1999 Limits and methods of measurement of immunity Feb 2003 

/ CISPR 20(1998) characteristics of sound and television broadcast 

receivers and associated equipment [First Revision] 

22 IS 12743:1989 Guide on methods of measurements of short duration Feb 2003 

/ IEC 60816 (1984) transients on low voltage power and signal lines. 

23 IS 13247(Part 1):1992 Complete Filter Units for Radio Interference Jan 2004 

/ IEC 60939-1:1988 Suppression: Part 1 Generic specification 



24 IS 13247(Part 2):1992 Complete Filter units for Radio Interference Suppression: Jan 2004 

/ IEC 60939-2:1988 Part 2 Sectional Specification Selection of Methods of 

Test and General requirements 

25 IS 13397:1992 

/ IEC 60725-1981 

Guide for considerations on reference impedances for Jan 2004 

use in determining the distructurbance characteristics of 

household appliances and similar electrical equipment 

26 IS 13671:1993 Guidance on the use of the substitution method for Jan 2004 

/ CISPR 19(1983) measurements of Radiation from microwave ovens for 

frequencies above 1 GHz 

27 IS 14700(Part 1/Sec 1):2000 Electromegnetic compatibility (EMC) Part 1: General Feb 2003 

/ IEC 61000-1-1 section:1 Application and interpretation of fundamental 

definitions and terms 

28 IS 14700(Part 3/Sec 2):1999 Electromagnetic compatibility Part 3 Limits Sec-2 Limits Feb 2003 

/ IEC 61000-3-2(1995) for harmonic current emmissions (equipment input 

current =< 16A per phase) 

29 IS 14700(Part 3/Sec 3):1999 Electromegnetic compatibility Part 3: Limits Sec-3 Feb 2003 

/ IEC 61000-3-3 (1994) Limitations of voltage flctuations and flicker in low 

voltage supply systems for equipment with rated current 

=< 16A 

30 IS 14700(Part 4/Sec 1):1999 Electromagnetic compatibility (EMC) Part 4 Testing and Feb 2003 

/ IEC 61000-4-1(1992) measurement techniques Section 1: Overview of 

immunity tests Basic EMC publication 

31 IS 14700(Part 4/Sec 2):1999 Electromagnetic compatibility (EMC) Part 4: Testing and Feb 2003 

/ IEC 61000-4-2(1995) measurement techniques Section 2: Electrostatic 

dischargge immunity test-Basic EMC publication 

32 IS 14700(Part 4/Sec 3):2005 Electromagnetic compatibility (EMC) Part 4: Testing & 

/ IEC 61000-4-3(2002) measurement techniques Sec 3 Radiated, radio 

frequency, electromagnetic field immunity test 


/ IEC 61000-4-4(1995) measurement techniques Section 4: Electrical fast 

transient /burst immunity test 

34 IS 14700(Part 4/Sec 7):2006 Electromagnetic compatibility (EMC) Part 4: Testing and 

/ IEC 61000-4-7(2002) measurement techniques Section 7- General guide on 

harmonic and interharmonics measurements and 

instrumentation, for power supply systems and 

equipment connected thereto 


/ IEC 61000-4-8(1993) measurement techniques Section8:Power frequency 

magnetic field immunity test 


/ IEC 61000-4-9(1993) measurement techniques Section 9:Pulse magnetic 

field immunity test 

37 IS 14700(Part 4/Sec 12):1999 

/ IEC 61000-4-12(1995) 

Electromagnetic compatibility (EMC) Part 4: Testing and Feb 2003 

measurement techniques Section 12: Oscillatory waves 

immunity test 

38 * IS 14700(Part 4/Sec 15):2001 Electromagnetic compatibility (EMC) Part 4: Testing and Jan 2004 

/ IEC 61000-4-15(1997) measurement techniques Section 15:Flickermeter 

functional and design specification 



39 IS 14700(Part 4/Sec 16):2001 

/ IEC 61000-4-16(1998) 

Electromagnetic compatibility (EMC) Part 4: Testing and Jan 2004 

measurement techniques Section 16: Test for immunity 

to be conductedcommon mode disturbances in the 

frequency range 0Hz to 150 kHz 

40 IS 14700(Part 6/Sec 3):2002 Electromagnetic compatibility (EMC) Part 6: Generic 

/ IEC 61000-6-3(1996) standards Section 3: Emission standards for 

residential, commercial and light industrial environment 

41 IS 15039:2001 Information technology equipment - Immunity Jan 2004 

/ CISPR 24 (1997) characteristics - Limits and methods of measurement 

42 * IS 15040:2001 Limits and methods of measurement of Radio - Jan 2004 

/ CISPR 25 (1995) disturbance characteriscs for the protection of receivers 

used on board vehicles 

43 IS 15598:2005 Interference to mobile radio communications in the 

/ CISPR 21(1999) presence of impulsive noise, methods of judging 

degradation and measures to improve performance 

FINALISED DRAFTS UNDER PRINT 

1 DOC.LITD 9(1883) Electromagnetic compatibility (EMC) Part 4: Testing and 

/ IEC 61000-4-24(97) measurement techniques Section 24: Test method for 

protective devices for hemp conducted 


1 DOC.LITD 9(1814) Draft Amendment No.1 to IS 12233(Part 3):1983 

Electromegnetic interface characteristics of overload 

power lines and high voltage equipment Part 3: code of 

practice for minimizing the generation of radio noise 



/ IEC 61000-4-11(1991) measurement techniques Section 11: Voltage dips, 

short interruptions and voltage variations immunity test 

2 DOC.LITD 9(2030) Industrial scientific and medical equipment (ISM)- 

/ CISPR 28(1997) Guidelines for emission levels within the bands 

designated by the ITU 

3 DOC.LITD 9(2007) Electromagnetic compatibility (EMC) - Part 4: Testing 

/ IEC 61000-4-15(2003) and measurement techniques Sec 15: Flickermeter - 

Functional and design specifications [First revision of IS 

14700(Part 4/Sec 15) 1997] 

4 DOC.LITD 9(2008) Radio disturbance characteristics for the protection of 

/ CISPR 25(2002) receivers used on board vehicles, boats, and on devices 

- Limits and methods of measurement (First revision of 

IS 15040:2001) 

5 DOC.LITD 9(2031) Electromagnetic compatibility (EMC)- Part 6:Generic 

/ IEC 61000-6-1(1997) standards-Section1: Immunity for residential, 

commercial and light-Industrial environments 

6 DOC.LITD 9(2032) Electromagnetic compatibility (EMC)-Part 6-2: Generic 

/ IEC 61000-6-2 standards - Immunity for industrial environments 



7 DOC.LITD 9(3007) Electromagnetic compatibility (EMC) Part 3 Limits - Sec 

/ IEC 61000-3-2(2005) 2 Limits for harmoni current emisision (Equipment input 

current 16a per phase [First Revision of IS 14700(Part 

3/Sec 2):95] 

8 DOC.LITD 9(3008) Electromagnetic compatibility (EMC) Part 4 Testing and 

/ IEC 61000-4-1(2000) measurement techniques - Sec 1 Overview of IEC 

61000-4 series [First Revision of IS 14700(Part 4/Sec 

1):92] 


/ IEC 61000-4-2(2001) measurement techniques - Sec 2 Electrostatic 

discharge immunity test [First Revision of IS 14700(Part 

4/Sec 2):95] 


/ IEC 61000-4-4(2004) measurement techniques - Sec 4 Electrical fast 

transient/burst immunity test [First Revision of IS 

14700(Part 4/Sec 4):95] 



/ IEC 61000-4-11(1991) measurement techniques Sec 11: Voltage dips, short 

interruptions and voltage variations immunity test 

2 DOC.LITD 9(1904) Determination of limits for industrial, scientific and 

/ CISPR 23 medical equipment 


PRODUCT 2 



TERMINOLOGY 2 

OTHERS 23 

TOTAL : 43 



LITD 10 POWER SYSTEM CONTROL AND ASSOCIATED COMMUNICATIONS 

SCOPE - To prepare Indian Standards for power system control equipment and systems 

including EMS (Energy Management System), SCADA (Supervisory Control 

and Data Acquisition), distribution automation, teleprotection and associated 

communications, such as power line carrier, used in planning, operation and 

maintenance of power. 


IEC/TC 57 Power system management and associated informations exchange 



Date Amd. 

1 IS 1885(Part 7):2001 Electrotechnical vocabulary: Part 7 Semiconductor Feb 2004 

| IEC 50(521):1984 devices and integrated circuits (Second Revision) 

2 IS 1885(Part 50):1985 Electrotechnical vocabulary: Part 50 Telecontrol (first Jan 2004 

| IEC 60050(371) revision) 

3 IS 8792:1995 Line traps for AC power system - Specification (first Dec 2005 

| IEC 60353(1989) revision) 

4 IS 8793:1995 Line traps for AC power systems - Methods of tests (first Dec 2005 

| IEC 60353(1989) revision) 

5 IS 8997:1978 

| IEC 60481(1974) 

Coupling devices for PLC systems Jan 2004 

6 IS 8998:1978 

| I IEC 60481(1974) 

Methods of tests for coupling devices for PLC systems Jan 2004 

7 IS 9482:1996 

| I IEC 60495(1993) 

Single side band power line-carrier terminals (first 

revision) 

Dec 2005 

8 IS 9528(Part 1):1980 Manual for planning of (SSB) PLC systems:Part 1 PLC Jan 2004 

| IEC 60663(1980) systems 

9 IS 9528(Part 2):1980 Manual for planning of(SSB)PLC systems: Part 2 PLC Jan 2004 

| IEC 60663(1980) systems planning 

10 IS 9859(Part 1):1981 Code of practice for installation and maintenance of Jan 2004 

outdoor PLC equipment:Part 1 Line traps 

11 IS 9859(Part 2):1982 Code of practice for installation and maintenance of Dec 2005 

outdoor PLC equipment: Part 2 Coupling devices 

12 IS 9859(Part 3):1983 Code of practice for installation & maintenance of Dec 2005 

outdoor PLC equipment: Part3 Coupling 

capacitors/capacitor voltage transformers 

13 IS 10706:1983 Methods of tests for single sideband PLC terminals Dec 2005 

14 IS 13241(Part 1):1991 Code of practice for installation and maintenance of Jan 2004 

indoor PLC equipment: Part1 PLC terminals 

15 IS 13968(Part 1/Sec 1):1994 Performance and testing of teleprotection equipment of Dec 2005 

| IEC 60834-1:1988 Power Systems:Part 1 Narrow-band command 

systems,Section 1 General 




| IEC 60834-1(1988) power systems:Part 1 Narrow-band command systems, 

Section 2 Terminology 



Section 3 Definitions and teleprotection systems 



Section 4 Requirements 



Section 5 Methods for performance testing 

20 IS 14392:1996 General considerations for telecommunication services Jan 2004 

/ IEC 61085(1992) for electronic power systems 

21 IS 15654:2006 Supervisory control and data acquisition (SCADA) 

system for oil and gas pipeline 

22 IS 15655:2006 Telecommuniciation facilities for operation and 

maintenance of oil and gas pipeline 


PRODUCT 5 



TERMINOLOGY 2 

OTHERS 7 

TOTAL : 22 



LITD 11 FIBRE OPTICS, FIBRES, CABLES AND DEVICES 

SCOPE - To prepare Indian Standard for fibre optics systems and associated 

components and devices intended for use with communications equipment and 

devices employing similar techniques. 


IEC/TC 86 Fibre Optics 

IEC/SC 86A Fibres and Cables 

IEC/SC 86B Fibre Optic Interconnecting 

Devices and Passive Components 

IEC/SC 86C Fibre Optic Systems and 

active devices 



Date Amd. 

1 ISQC 210000 : 1994 Connector for optical fibres and cables - Generic Jan 2003 

/ IECQC 210000(1993) specification 

2 ISQC 810000 : 1994 

/ IECQC 810000(1992) 

Fibre optic branching devices - Generic specification Jan 2003 

3 ISQC 210700 : 1998 

/ IECQC 210700(1993) 

Connector for optical fibres and cables:Part 7 Sectional 

specification fibre optic connector type FC 

Jan 2003 

4 IS 13616(Part 2):2001 Fibre optic branching devices: Part 2 Sectional 

/ IEC 60875-2(1992) specification - Non wavelength selective branching 

devices (First revision) 

5 * IS 13715(Part 1):1993 Fibre optic switches : Part 1 Generic specification Jan 2003 

/ IEC 60876-1(1986) 

6 IS 13882(Part 1/Sec 1):2001 Optical fibre cables: Part 1 Generic specification, Sec 1 Sep 2004 

/ IEC 60794-1-1(1999) General (First Revision) 

7 IS 14624(Part 2):1998 Safety of laser products: Part 2 Safety of optical fibre Jan 2003 

/ IEC 60825-2(1993) communication system 

8 IS 14976:2001 Calibration of fibre optic power meters Jul 2004 

/ IEC 61315(1995) 

9 IS 15056(Part 1/Sec 1):2002 Optical fibre: Part 1 Generic specification, Sec 1 General Jan 2005 

/ IEC 60793-1-1(1995) 

10 IS 15077(Part 1):2001 Semiconductor optoelectronic devices: Part 1 Essential Mar 2005 

/ IEC 62007-1(1997) ratings and characteristics 

11 IS 15077(Part 2):2001 Semiconductor optoelectronic devices: Part 2 Measuring Dec 2004 

/ IEC 62007-2(1997) methods 

12 IS 15480(Part 1):2004 Fibre optic attenuators : Part 1 Generic specification 

/ IEC 60869-1(1999) 


1 DOC.LITD 11(2009) Optical fibres - Part 1 - 20 Measurement methods and 

/ IEC 6073-1-20(2001) test procedures - fibre geometry 


/ IEC 60793-1-21(2001) test procedures - coating geometry 




/ IEC 60793-1-22(2001) test procedures - Length measurement 

4 DOC.LITD 11(2013) Optical fibres - Measurement methods and test 

/ IEC 60793-1-50(2001) procedures - Damp heat (steady state) 


/ IEC 6073-1-51(2001) procedures - Dry heat 


/ IEC 60793-1-52(2001) procedures - Change of temperature 


/ IEC 60793-1-53(2001) procedures - Water immersion 


1 DOC.LITD 11(1962) Fibre optic sensors - Part 1 Generic specification 

/ IEC 61757-1(1998) 

2 DOC.LITD 11(1965) Calibration of optical time-domain reflectometers 

/ IEC 61746(2001) (OTDRs) 

3 DOC.LITD 11(1983) Fibre optic spatial switches - Part 1 Generic 

/ IEC 60876-1 (2001) specification [First Revision of IS 13715(Part 1)1993] 


PRODUCT 6 



OTHERS 2 

TOTAL : 12 



LITD 12 Transmitting Equipment for Radio Communication 

SCOPE - To prepare indian standards for transmitting equipment for radio 

communication purposes and electronic devices employing similar techniques. 

The standardization work deals with methods of measurement, safety 

requirements and transmitter control and interconnection. 


IEC/TC 103 Transmitting equipment for radio communication 


Date Amd. 


1 IS 1885(Part 18):1967 Electrotechnical vocabulary: Part 18 General terms of Jan 2004 

| IEC 60050(60) radio-communications 

2 IS 1885(Part 19):1967 Electrotechnicalvocabulary: Part 19 Radio Jan 2004 

| IEC 60050(60) communication circuits 

3 IS 1885(Part 20):1967 Electrotechnical vocabulary: Part 20 Radio-wave Jan 2004 

| IEC 60050(60) propagation 

4 IS 1885(Part 21/Sec 1):1988 

| IEC 60050(712) 

Electrotechnical vocabulary: Part 21 Antennas, Sec 1 Feb 2003 

Basic terms for antennas terminals (first revision) [(sec 1 

to 6) under one volume] 

5 IS 1885(Part 21/Sec 2):1988 

| IEC 600 50(712) 

Electrotechnical vocabulary: Part 21 Antennas, Sec 2 Feb 2003 

Terms relating to electrical or radiating characteristics of 

antennas (first revision) 

6 IS 1885(Part 21/Sec 3):1988 Electrotechnical vocabulary: Part 21 Antennas, Sec 3 Feb 2003 

| IEC 600 50(712) Terms relating to types ofantennas defined by their 

electrical or radiating characteristics (first revision) 


| IEC 600 50(712) Terms relating to antennasand antenna elements 

consisting mainly of radiating conductors (first revision) 


| IEC 600 50(712) Terms relating to antennasand antenna elements 

consisting mainly or radiating surfaces and of aperture 



| IEC 60050(712) Terms relating to devices associated with antennas (first 

revision) 

10 IS 1885(Part 23):1967 Electrotechnical vocabulary: Part 23 Radio telegraphy Jan 2004 

| IEC 60050(60) and mobile radio 

11 IS 1885(Part 25):1967 Electrotechnical vocabulary: Part 25 Radiolocation and Jan 2004 

| IEC 60050(60) radio navigation 

12 IS 1885(Part 65/Sec 1):1988 Electrotechnical vocabulary: Part 65 Transmission, Sec Feb 2003 

| IEC 50(704) 1 General aspects of transmission [(sec 1 to 5) under 

one volume] 


| IEC 60050(704) 2 Analogue transmission 


| IEC 600 50(704) 3 Time division multiplexing 




| IEC 600 50(704) 4 Digital transmission 


| IEC 60050(704) 5 Pulse code modulation 

17 IS 1885(Part 66):1988 Electrotechnical vocabulary: Part 66 Space radio Feb 2003 

| IEC 60050(725) communications 

18 IS 1885(Part 82):1996 Electrotechnical vocabulary : Part 82 Integrated services Feb 2003 

/ IEC 60050(716)(1996) digital network [ISDN] 

19 IS 2032(Part 16):1972 Graphical symbols used in electrotechnology: Part 16 Feb 2003 

| IEC 600117-10 Aerials 

20 * IS 10437:1986 Safety requirements for radio transmitting equipment Sep 2004 

| IEC 60215(1978) (first revision) 

21 IS 10485:1983 Code of practice for the installation of single and Feb 2003 

| BS CP 1020-1973 community antenna systems for the reception of sound 

and television broadcasting 

22 IS 10820(Part 1):1984 Methods of measurement for radio equipment used in Sep 2004 

| IEC 60489-1(1983) mobile services: Part 1 General definitions and 

conditions of measurement 

23 IS 10820(Part 2):1996 

| IEC 60489-2(1991) 

Methods of measurement for radio equipment used in Jan 2004 

the mobile services: Part 2 Transmitters employing A3E, 

F3E or G3E emissions (first revision) 

24 IS 10820(Part 5):1992 Methods of measurement for radio equipment used in Feb 2003 

/ IEC 60489-5:1987 the mobile services: Part 5 Receivers employing single 

side-band techniques [ R3E,H3E OR J3E] 

25 * IS 10820(Part 6):1994 Methods of measurement for radio equipment used in Sep 2004 

/ IEC 60489-6:1987 the mobile services: Part 6Selective calling and data 

equipment 

26 * IS 10853(Part 1):1984 Methods of measurement for radio transmitters: Part 1 Sep 2004 

| IEC 60244-1(1968) General conditions of measurement 


| IEC 60244-1(1968) Frequency 


| IEC 60244-1(1968) Output power and power consumption 

29 IS 10853(Part 4):1994 Methods of measurement for Radio Transmitters: Part 4 Feb 2003 

/ IEC 60244-13:1991 Performance characterististics for FM sound 

Broadcasting 

30 IS 13409:1992 Specification for high frequency transreceivers Feb 2003 


1 DOC.LITD 12(1979) Methods of measurement for redio equipment used in 

/ IEC 60489-6(1999) the mobile services: Part 6 Selective calling & data 

equipment [First revision of IS 10820(Part 6):1994] 

2 DOC.LITD 12(1987) Safety requirements for radio transmitting equipment 

/ IEC 60215 (Second revision of IS 10437:1986) 



3 DOC.LITD 12(1988) Methods of measurement for radio transmitters: Part 1 

/ IEC 60244-1 General conditions of measurement {First revision of IS 

10853(Part 1):1984] 

4 DOC.LITD 12(1989) Methods of measurement for radio equipment used in 

/ IEC 60489-6 mobile services: Part 6 Selective calling and data 

equipment {First Revision of IS 10820(Part 6):1984} 


PRODUCT 1 




SYMBOLS 1 

OTHERS 2 

TOTAL : 30 



LITD 13 INFORMATION AND COMMUNICATION TECHNOLOGIES 

SCOPE - To prepare Indian standards relating to computer communication networks and 

interfaces to these computer communication networks including 

microprocessor systems, interfaces, protocols and associated interconnecting 

media for information technology equipments generally for commercial and 

residential environments as well as routers, transmitting switches equipment 

etc. 


ISO/IEC/JTC1/SC 6 Telecommunications and information exchange between 

systems 

ISO/IEC/JTC1/SC25 Interconnection of information technology equipment 

ISO/IEC/JTC1/SC35 User Interfaces 



Date Amd. 

1 IS 1885(Part 26):1968 Electrotechnical vocabulary: Part 26 Telecommunication Mar 2003 

relays 

2 IS 1885(Part 58):1984 Electrotechnical vocabulary: Part 58 Jan 2004 

| IEC 60050(701) Telecommunication channels and networks 

3 IS 10735:1983 25 Pin DTE/DCE interface connectors and pin Jan 2006 

/ ISO 2110:1980 assignments for data communication 

4 IS 10736:1983 37 Pin and 9 Pin DTE/DCE interface connectors and pin Jan 2006 

/ ISO 4902:1980 assignments for data communication 

5 IS 10737:1983 15 Pin DTE/DCE interface connectors and pin Jan 2006 

/ ISO :4903:1980 assignments for data communication 

6 IS 11413:1986 Character structure for start/stop and synchronous Jan 2006 

/ ISO 1177-1985 transmission for informationprocessing 

7 IS 11414:1986 Basic mode control procedures for data communication Jan 2006 

/ ISO 1745:1975 systems 

8 IS 11416:1986 

/ ISO 2628 :1973 

Basic mode control procedure complements Jan 2006 

9 IS 11418(Part 1):1986 

/ ISO 3309:1984[E] 

High level data link control procedures:Part 1 Frame 

structure 

Jan 2006 

10 IS 11418(Part 2):1986 High Level data link control procedures: Part 2 Jan 2006 

/ ISO 4335:1984 Consolidation of elements of procedures 

11 IS 12032(Part 9):1993 Graphial symbols for diagrams in the field of Mar 2003 

/ IEC 60617-9(1983) electrotechnology: Part 9 Telecommunications, 

switching and peripheral equipment 

12 IS 12285:1987 Start-stop transmission signal quality at DTE/DCE Jan 2006 

/ ISO 7480-1984[E] interfaces 

13 IS 13589:1993 Transport service definition in open systems Jan 2006 

/ ISO 8072:1986 interconnection for information processing systems 

14 IS 13611:1993 Protocol for providing the connectionless - Mode network Jan 2006 

/ ISO 8473-1988 service in data communications for information 

processing systems 



15 IS 13868:1993 Network service definition in data communications for Jan 2006 

/ ISO 8348:1987{E} information processing systems 

16 IS 13919:1994 Information technology - Telecommunications and Jan 2006 

/ ISO/IEC 8073:1992 information exchange between systems - Open systems 

interconnection - Protocol for providing the connection - 

Mode transport service 


TERMINOLOGY 3 

OTHERS 13 

TOTAL : 16 



LITD 14 Software and System Engineering 

SCOPE - To prepare Indian Standards relating to all aspects of computer software 

including Communication Software (OSI architecture, networking, e-mail, 

voice mail, protocols, interfaces etc.), Programming Languages, System 

software, application software, information services (EFT,EDI), multimedia and 

hypermedia, software tools, educational software and software quality 

assurance. 


ISO/IEC/JTC1/SC 7 Software Engineering 

ISO/IEC/JTC1/SC 22 Programming Laqnguages, their Environments and 

system software interfaces 

ISO/IEC/JTC1/SC 29 Coding of audio,picture,multimedia and hypermedia 

information 



Date Amd. 

1 IS 1885(Part 52/Sec 2):1980 Electrotechnical vocabulary: Part 52 Data processing, Jan 2006 

| ISO 2382(02) Sec 2 Arithmatic and logic operations 

2 IS 1885(Part 52/Sec 7):1980 Electrotechnical vocabulary:Part 52 Data processing, Jan 2006 

| ISO 2382(05) Sec 7 Digital computer programming 


| ISO 2382(10) Sec 10 Data communication 


| ISO 2382(10) Sec 11 Operating technique and facilities 


| ISO 2382(19) Sec 13 Analogue and hybrid computing 


| ISO 2382(13) Sec 14 Computer graphics and computer micrographics 


| ISO 2382(15) Sec 15 Programming languages 

8 IS 10680:1983 

/ ISO 1539:1980 

Programming languages - FORTRAN Sep 2004 

9 IS 10681:1983 

/ ISO 1989:1978 

Programming languages - COBOL Sep 2004 

10 IS 10934:1984 

/ ISO 3307:1975(E) 

Representations of time of the day Feb 2004 

11 IS 10935:1983 

/ ISO 2711-1975[E] 

Representation of ordinal dates Feb 2004 

12 IS 11179:1985 

/ ISO 1004(1977) 

Print specification for magnetic ink character recognition Jan 2004 

for information processing 

13 IS 11289:1985 Code of practice for performance monitoring of computer Jan 2004 

| BS 6238:1982 based systems 

14 IS 11291:1985 Code of practice for testing of computer based systems Jan 2004 

| BS 5887:1980 



15 IS 11365:1985 Representation of local times differentials for information Feb 2004 

/ ISO 4031:1978 interchange 

16 IS 11403:1993 Information technology - Programming languages - Sep 2004 

/ ISO 7185:1990 Pascal 

17 IS 11418(Part 3):1986 High level data link control procedures: Part 3 Jan 2006 

/ ISO 7809:1984 Consolidation of classes of procedures 

18 IS 11713(Part 1):1986 Guide for physical planning of computer complexes: Part Jan 2006 

1 Layouts 


2 Safety 


4 Services 

21 IS 12372:1987 Presentation of single-hit decision tables Jan 2004 

/ ISO 5806:1984(E) 

22 IS 12373(Part 1):1987 Basic reference model of open systems interconnection Jan 2006 3 

/ ISO 7498-1984[E] for information processing systems : Part 1 

23 IS 12373(Part 2):1992 Basic reference model of open systems interconnection Sep 2004 

/ ISO 7498-2:1989 for information processing systems: Part 2 Security 

architecture 

24 IS 12373(Part 3):1992 Basic reference model of open systems Sep 2004 

/ ISO 7498-3:1989 interconnections for information processing systems: 

Part 3 Naming and addressing 

25 IS 12373(Part 4):1993 Basic reference model of open systems interconnection Jan 2006 

/ ISO/IEC 7498-4:1989 for information processing systems:Part 4 Management 

framework 

26 IS 13250:1992 Industrial real-time FORTRAN-Application for the control Sep 2004 

/ /ISO7846:1985 of industrial processer 

27 IS 13392:1992 Specification for program flow for processing sequential Sep 2004 

/ ISO 6593:1985 files in terms of record groups for information processing 

28 IS 13393:1992 Standard representation of latitude, longitude and Sep 2004 

/ ISO 6709:1983 altitude for geographic point locations 

29 IS 13394:1992 Guidelines for the documentation of computer based Sep 2004 

/ ISO 6592:1985 application systems for information processing 

30 IS 13553:1993 User documentation and cover information for consumer Jan 2006 

/ ISO 9127:1988 software packages for information processing systems 

31 IS 13557(Part 14):1993 Information processing systems-Vocabulary : Part 14 Jan 2006 

| ISO/IEC DP 2382-14 Reliability, maintenance and availability 

32 IS 13557(Part 18):1999 Information processing systems - Vocabulary:Part 18 Jan 2006 

/ ISO 2382-18(1987) Distributed data processing 

33 IS 13587:1992 Computer system configuration diagram symbols and Sep 2004 

/ ISO :8790:1987 conventions for information processing systems 



34 IS 13615:1993 Service definition for the association control service Jan 2006 

/ ISO 8649:1988 element in open systems terconnection for information 


35 IS 13672:1993 Application layer structure in open systems Jan 2006 

/ ISO/IEC 9545:1989 interconnection for information technoclogy 

36 IS 13675(Part 1):1993 Remote operations in text communication for information Jan 2006 

/ ISO/IEC 9072-1:1989 processing systems:Part1 Model, notation and service 

definition 

37 IS 13675(Part 2):1993 Remote operations in text communication for information Jan 2006 

/ ISO/IEC 9072-2:1989 processing systems : Part 2 Protocol specification 

38 IS 13706:1993 Protocol specification for the association control service Jan 2006 

/ ISO/IEC 8650:1988 element in open systems interconnection for information 


39 IS 13707(Part 1):1993 Reliable transfer in text communication for information Jan 2006 

/ ISO/IEC 9066-1:1989 processing systems : Part 1 Model and service definition 

40 IS 13707(Part 2):1993 Reliable transfer in text communication for information Jan 2006 

/ ISO/IEC 9066-2:1989 processing systems:Part2 Protocol specification 

41 IS 13791:1993 

/ ISO 6160:1979 

Programming languages - PL/I Jan 2006 

42 IS 13792:1993 

/ ISO 8652:1987 

Programming languages - ADA Jan 2006 

43 IS 13874:1993 Guide for C-Program Coding Jan 2006 

44 IS 14430:1997 Guide for Pascal program coding Sep 2004 

45 IS 14638:1998 Information technology - Software product evaluation - Jan 2006 

/ ISO/IEC 9126(1991) Quality characteristics and guidelines for their use 

46 IS 14639:1998 Information technology - Software packages - Quality Jan 2006 

/ ISO/IEC 12119 (1994) requirements and testing 

47 IS 14653:1999 Guide for evaluation and selection of case tools Jan 2006 

/ ISO/IEC 14102(1995) 

48 IS 14692(Part 1):1999 Information processing systems - Vocabulary:Part 1 Jan 2006 

/ ISO/IEC 2382-1(1993) Fundamental terms 


1 DOC.LITD 14(2060) Software engineering - Guidelines for the application of 

/ ISO/IEC 90003:2004 ISO 9001:2000 to computer software 

2 DOC.LITD 14(2061) Information technology – Service management – Part 1: 

/ ISO/IEC 20000-1(2005 Specification 

3 DOC.LITD 14(2062) Information technology – Service management – Part 2: 

/ ISO/IEC 20000-2(2005 Code of practice 





TERMINOLOGY 7 

SYMBOLS 2 

OTHERS 37 

TOTAL : 48 



SCOPE - 

LITD 15 DATA MANAGEMENT SYSTEMS 


ISO/IEC/JTC1/SC24 Computer Graphics and Image Processing 

ISO/IEC/JTC1/SC31Automatic Data Capture 

ISO/IEC/JTC1/SC 32 Data Management Services 

ISO/IEC/JTC1/SC 34 Document Description and ProcessingLanguages 



Date Amd. 

1 IS 12369:1987 Specification for graphical Kernal system for computer Jan 2006 

/ ISO 7942-1985 graphics 

2 IS 12736:1989 Printing specifications for optical character recognition Feb 2003 

/ ISO 1831-1980 

3 IS 12755(Part 1):1989 Alphanumeric character sets for optical recognition: Part Feb 2003 

/ ISO 1073/1(1989) 1 Character set OCR -A - Shapes and dimensions of 

the printed image 

4 IS 12755(Part 2):1989 Alphanumeric character sets for optical recognition: Part Feb 2003 

/ ISO 1073/2-1976 2 Character set OCR -B - Shapes and dimensions of 

the printed image 

5 IS 13396:1992 Database language SQL for information processing Sep 2004 

/ ISO 9075:1987 systems 

6 IS 13557(Part 4):1993 Information processing systems-Vocubalary Part 4 Jan 2006 

/ ISO 2382-4:1987 Organization of data 

7 IS 13557(Part 5):1993 Information processing systems-Vocabulary : Part 5 Jan 2006 

/ ISO 2382-5:1989 Representation of data 

8 IS 13557(Part 6):1992 Information processing systems-Vocabulary : Part 6 Sep 2004 

/ ISO 2382-6:1987 Preparation and handling of data 

9 IS 14678:1999 Information processing systems - Reference model of Jan 2006 

/ ISO/IEC 10032(1995) data management 


OTHERS 9 

TOTAL : 9 



LITD 16 COMPUTER HARDWARE, PERIPHERALS AND IDENTIFICATION CARDS 

SCOPE - To prepare Indian Standards relating to : 

a)all aspects of computer hardware including special peripherals suitable for 

Indian environment. 

b) Integrated Circuit Cards and Personal Identification, Office Equipments and 

removable Digital storage media other than hard disk utilizing optical optical 

and/or magnetic recording technology for digital information interchange. 

CORRESPONDING ISO/IEC COMMITTEES: 

IEC/TC 108 Safety of Electronic Equipment within the field of Audio/Video, 

Information Technology and Communication Technology 

ISO/IEC/JTC1 Information Technology 

ISO/IEC/JTC1/SC 17 Identification and related devices 

ISO/IEC/JTC1/SC 23 Optical disk catridges for Information Interchange 

ISO/IEC/JTC1/SC 28 Office equipment 



Date Amd. 

1 IS 1885(Part 52/Sec 3):1980 Electrotechnical vocabulary: Part 52 Data processing, Feb 2003 

| ISO 2382(02) Sec 3 Equipment technology (selected terms) 


| ISO 2382(11) Sec 8 Control, input-output and arithmatic equipment 


| ISO 2382(12) Sec 9 Data media, storageand related equipment 

4 IS 1885(Part 59):1986 Electrotechnical vocabulary: Part 59 Educational or Jan 2004 

training equipment and systems 

5 IS 8817:1978 Keytop printed or displayed symbols for electronic Feb 2003 

| ISO/R 1093-1969 calculators 

6 IS 9306:1979 

| ISO 1092-1974(E) 

Layouts of numeric keyboard for electronic calculators Feb 2003 

7 IS 9538:1980 Electronic calculators (non-programmable type) Feb 2003 

8 IS 11402(Part 1):1986 Specification for interchangeable magnetic single disk Jan 2004 

/ ISO 3562(1976) cartridge,top loaded : Part 1 Physical and magnetic 

characteristics 

9 IS 11404(Part 1):1986 Data interchange on 130 mm, single sided, 1.9 tpmm, Jan 2004 

/ ISO 6596/1(1982) flexible disk cartridges using two-frequency recording: 

Part 1 Physical and magnetic characteristics 

10 IS 11404(Part 2):1986 Data interchange on 130 mm, single sided, 1.9 tpmm, Jan 2004 

/ ISO 6596/2(1985) flexible disk cartridges using two-frequency recording: 

Part 2 Track format 

11 IS 11405(Part 1):1986 Data interchange on 130 mm, double sided, 1.9 tpmm, Jan 2004 

/ ISO 7487/1(1985) flexible disk cartridges using modified frequency 

modulation recordings: Part 1 Physical and magnetic 

characteristics 





modulation recordings: Part 2 Track format 



modulation recordings: Part 3 Track format B 

14 IS 11406:1986 File structure and labelling of flexible disk cartridges for Jan 2004 

/ ISO 7665-1983(E) information interchange 

15 IS 11408:2006 Specification for unrecorded 12.7 mm wide 32 ftpmm Jan 2004 

/ ISO 1864(1992) NRZ1,126 ftpmm phase encodedand 356 ftpmm 

NRZ1,magnetic tape for information processing 

16 IS 11409:2006 Specification for 9 track,12.7 mm wide magnetic tape Jan 2004 

/ ISO 1863(1990) recorded at 63 rpmm information processing 

17 IS 11410:2006 9 track,12.7 mm wide magnetic tape recorded at 63 Jan 2004 

/ ISO 3788(1990) rpmm, phase encoded for information processing 

18 IS 11411:1986 9 track,12.7 mm wide magnetic tape format and Jan 2004 

/ ISO 5652(1984) recording using group coding at 246 cpmm for 

information processing 

19 IS 11419:1992 Magnetic tape labelling and file structure and labelling of Jan 2004 

/ ISO 1001(1986) magnetic tapes for information processing (first revision) 

20 IS 11853(Part 1):1987 Data interchange on 130 mm, double sided, 3.8 tpmm, Feb 2003 


modulation recordings: Part 1 Dimensional, Physical 

and magnetic characteristics 



modulation recordings: Part 2 Track format A 



modulation recordings : Part 3 Track format B 

23 IS 12223(Part 1):1987 6.30 mm wide magnetic tape cartridge using IMFM Feb 2003 

/ ISO 8063/1(1986) recording : Part 1 Mechanical, Physical and magnetic 

properties 

24 IS 12223(Part 2):1989 Data interchange on 6.30 mm wide magnetic tape Feb 2003 

/ ISO 8063/2-1986 cartridge using IMFM recording at 252 ftpmm for 

information processing: Part 2 Track format and method 

of recording for data interchange in start/stop mode 

25 IS 12327(Part 1):1988 

/ ISO 8630-1(1987) 

Data Interchange on 130 mm flexible disk cartridges Feb 2003 

using modified frequency modulation recording at 13 262 

ftprad on 80 tracks on each side : Part 1 Dimensional, 

physical and magnetic characteristics 

26 IS 12327(Part 2):1988 Data Interchange on 130 mm double flexible disk Feb 2003 

/ ISO 8630-2(1987) cartridges using modified frequency modulation 

recording at 13 262 ftprad on 80 tracks on each side : 

Part 2 Track format A for 77 tracks 



27 IS 12327(Part 3):1989 Data interchange on 130 mm flexible disk cartridges Feb 2003 

/ ISO 8630/3-1987 using modified frequency modulation recording at 13262 

ftprad on 80 tracks on each side: Part 3 Track format B 

for 80 tracks 

28 IS 12636:1989 Data interchange on 6.30 mm magnetic tape Feb 2003 

/ ISO 4057(1979) cartridge,63 bpmm phase-encoded for information 

processing 

29 IS 12660:1989 Information processing-Magnetic tape cassette and Feb 2003 

/ ISO 4341-1978 cartridge labelling and file structure for information 

interchange 

30 IS 12876:1989 Information interchange on 3.81 mm magnetic tape Feb 2003 

/ ISO 3407-1983 cassette at 4 cpmm, phase encoded at 63 ftpmm 

31 IS 12878(Part 1):1989 

/ ISO 8462/1-1986 

6.30 mm magnetic tape cartridge using GCR recording Feb 2003 

at 394 ftpmm: Part 1 Mechanical, physical and magnetic 

properties 

32 IS 12878(Part 2):1989 6.30 mm magnetic tape cartridge using GCR recording Feb 2003 

/ ISO 8462/2-1986 at 394 ftpmm: Part 2 Streaming mode 

33 IS 12922(Part 1):1989 90 mm flexible disk cartridge using modified frequency Feb 2003 

/ ISO 8860/1-1987 recording at 7958 ftprad, 5.3 on recording at 7958 

ftprad,on 80 tracks on each side : Part 1 

Dimensional,physical and magnetic characteristic 

34 IS 12922(Part 2):1989 90 mm flexible disk cartridge using modified frequency Feb 2003 

/ ISO 8860/2-1987 recording at 7958 ftprad, on 80 tracks on each side : 

Part 2 Track format 

35 IS 13252:2003 Safety of information technology equipment including 

/ IEC 60950:2000 electrical business equipment (First revision) 

36 IS 13384(Part 1):1992 Cathode ray tube based data display monitor : Part 1 Jan 2004 

Colour 

37 IS 13384(Part 2):1997 Cathode-ray tube based data display monitor : Part 2 Jan 2004 

Monochrome 

38 IS 13557(Part 12):1993 Information processing systems - Vocabulary: Part 12 Feb 2003 

/ ISO 2382-12:1988 Peripheral equipment 

39 IS 13737:1993 Information Technology - 130 mm Rewritable optical disk Feb 2003 

/ ISO/IEC 10089:1991 cartridges for information interchange 

40 IS 13738(Part 1):1993 Data interchange on 90 mm flexible disk cartridges Feb 2003 

/ ISO/IEC 9529-1:1989 using modified frequency modulation recording at 15 916 

ftprad, on 80 tracks on each side: Part 1 Dimensional, 

physical and magnetic characteristicss 

41 IS 13738(Part 2):1993 Information processing systems - Data interchange on Feb 2003 

/ ISO/IEC 9529-2:1989 90 mm flexible disk cartridges using modified frequency 

modulation recording at 15 916 ftprad, on 80 tracks on 

each side: Part 2 Track format 

42 IS 14147(Part 1):2003 Identification cards - Recording Techiques Part 1 

/ ISO 7811-1:1995 Embossing [First revision of IS14147(Part 1):1994] 

43 IS 14147(Part 2):2003 Identification cards - Recording technique: Part 2 

/ ISO 7811-2:1995 Magnetic stripe(First Revision of IS14147(Part 2):1994]) 



44 IS 14147(Part 3):1994 Identification cards - Recording technique: Part 3 Feb 2003 

/ ISO 7811-3:1985 Location of embossed characters on ID-1 cards 

45 IS 14147(Part 4):1994 Identification cards - Recording technique: Part 4 Feb 2003 

/ ISO 7811-4:1985 Location of read-only Magnetic track - Track 1 & 2 

46 IS 14172:1994 

/ ISO 7810-1985 

Identification cards - Physical characteristics Feb 2003 

47 IS 14173(Part 1):2003 

/ ISO 7812-1:2000 

Identification cards -Identification of issuers - Part 1 

Numbering system (First revision) 

48 IS 14173(Part 2):2003 Identification cards -Identification of issuers - Part 2 

/ ISO/IEC 7812-2:2000 Application and Registration Procedures (First revision ) 

49 IS 14174:1994 

/ ISO 7813-1990 

Identification cards-Financial transaction cards Feb 2003 

50 IS 14175:1994 

/ ISO 9293-1987 

Information processing - Volume and file structure of 

flexible disk cartridges for information interchange 

Feb 2003 

51 IS 14176:1994 Information processing - Volume and file structure of CD- Feb 2003 

/ ISO 9660-1988 ROM for information interchange 

52 IS 14202(Part 1):2003 Identification cards - Integrated circuit(s) - Cards with 

/ ISO 7816-1:1998 contacts: Part 1 Physical characteristics(First revision) 

53 IS 14202(Part 2):2003 Identification cards - Integrated circuit(s) - Cards with 

/ ISO 7816-2:1999 contacts: Part 2 Dimensions and location of the 

contacts (First revision) 

54 IS 14202(Part 3):2002 Identification cards - Integrated circuit(s) cards with 

/ ISO/IEC 7816-3(1997) contacts - Part 3:Electronic signals and transmission 

protocols 


/ ISO/IEC 7816-5(1994) contacts - Part 5 Registration system for applications in 

IC cards 


/ ISO/IEC 7816-6(1997) contacts - Part 6 Interindustry data elements 

57 IS 14441:1997 Specification for keyboard Jan 2004 

58 IS 14486:1997 General Purpose Dot Matrix Printer - Specification Jan 2004 1 

59 IS 14701:1999 Information processing system 90 mm rewritable 90 mm Feb 2003 

/ ISO/IEC 10090:1992 optical DISC cartridge 

60 IS 14886:2000 Switch mode power supply-Specification Feb 2003 

61 IS 14896:2001 Personal computer - Specification Apr 2004 

62 IS 15062:2001 Specification for floppy disk drive Dec 2004 

63 IS 15189:2002 Information technology - Data - Interchange on Read- 

/ ISO/IEC 10149:1995 Only 120 mm optical data disks (CD-ROM) 




1 DOC.LITD 16(2067) Methods of measurement of touch current and 

protectibve conductor current 

2 DOC.LITD 16(1980) Information technology equipment - Safety: Part 1 

General requirements (Based on IEC 60950-1:05) 

(Second revision of IS 13252:2003) 

DRAFT STANDARDS FORMULATED 

1 DOC.LITD 16(1933) Identification cards - Integrated circuit(s) cards with 

/ ISO/IEC 7816-4(1995) contacts - Part 4 Interindustry command for interchange 


PRODUCT 7 

TERMINOLOGY 5 

OTHERS 51 

TOTAL : 63 



LITD 17 INFORMATION SYSTEMS SECURITY AND BIOMETRICS 

SCOPE - To prepare Indian Standards relating to security aspects of Information 

systems (including security aspects of smart cards and biometrics) 

CORESPONDING ISO/IEC COMMITTEES:: 

JTC 1 Information Technology 

JTC 1/SC 17 Cards and Personal IdentificationOnly security aspects) 

JTC 1/SC 27 Security Techniques 

JTC 1/SC 37 Biometrics (Only security aspects) 



Date Amd. 

1 IS 14356:1996 Guide for protection of information resources May 2002 

2 IS 14490(Part 1):2006 Information Technology - Security techniques - 

/ ISO/IEC FDIS 15408-1 Evaluation criteria for security - Part 1: Introduction and 

general model [First Revision of IS 14990(Part 

1):2001/ISO/IEC 15408-1:2001] Text based on (ISO/IEC 

FDIS 15408-1:2005 issued by ISO/IEC/JTC 1 

3 IS 14490(Part 2):2006 nformation Technology - Security techniques - 

/ ISO/IEC 15408-2:2005 Evaluation criteria for ITsecurity - Part 2: Security 

functional requirements [First Revision of IS 14990(Part 

2):2001/ISO/IEC 15408-2:2001] Text based on (ISO/IEC 

FDIS 15408-2) 

4 IS 14490(Part 3):2006 nformation Technology - Security techniques - 

/ ISO/IEC 15408-3:2005 Evaluation criteria for ITsecurity - Part 3: Security 

assurance requirements [First Revision of IS 14990(Part 

3):2001/ISO/IEC 15408-232001] Text based on (ISO/IEC 

FDIS 15408-3) 

5 IS 14990(Part 1):2001 Information Technology - Security techniques - Jan 2004 

/ ISO/IEC 15408-1:1999 Evaluation criteria for IT Security - Part 1: Introduction 

and general model 

6 IS 14990(Part 2):2001 Information Technology - Security techniques - Aug 2004 

/ ISO/IEC 15408-2:1999 Evaluation criteria for IT Security - Part 2: Security 

functional requirements 

7 IS 14990(Part 3):2001 Information Technology - Security techniques - Aug 2004 

/ ISO/IEC 15408-3:1999 Evaluation criteria for IT Security - Part 3: Security 

assurance requirements 

8 IS 15114:2002 Information Processing - Modes of operation for a 64 - bit 

/ ISO 8372:1987 block cipher algorithm 

9 IS 15115:2002 Information Technology - Security techniques - 

/ ISO/IEC 9979:1999 Procedures for the registration of Cryptographic 

algorithms 

10 IS 15116:2002 Information Technology - Security techniques - Modes of 

/ ISO/IEC 10116:1997 operation for an n-bit block cipher 

11 IS 15580:2005 Information Technology - Systems Security Engineering 

/ ISO/IEC 21827(2002) Capability Maturity Model (SSE-CMM) 



12 IS 17799:2005 Information Technology - Code of Practice for 

/ ISO/IEC 17799:2000 Information Security Management (First Revision of IS 

14357:2002 ISO/IEC 17799:2000) Text based on 

ISO/IEC JTC 1/SC 27 N4595 ISO/IEC 17799:2005) 

13 IS 27001:2005 

/ ISO/IEC 27001:2005 

Information Technology - Security Techniques - 

Information Security Management - Requirements (First 

Revision of IS 15150:2002) - Text based on ISO/IEC 

Final DIS 27001( ISO/IEC JTC 1/SC 27/WG 1N14472) 

FINALISED DRAFTS UNDER PRINT 

1 IS 15671:2006 Information Technology - Security techniques - 

/ ISO/IEC 18045 Methodology for IT Security evaluation 


1 DOC.LITD 17(3002) Information technology - Security techniques - 

/ ISO/IEC FCD27006(06) Requirements for the accreditation of bodies providing 

certification of Information security management systems 


1 DOC.LITD 17(2058) Information technology - Security techniques - 

/ ISO/IEC 13335-2 Management of information and communications 

technology security - Part 2 Information security risk 

management 

2 DOC.LITD 17(2091) Information technology - Security techniques Digital 

/ ISO/IEC 9796-2(2002) signature schemes giving message recovery - Part 2: 

Integer factorization based mechanisms 

3 DOC.LITD 17(2092) Information technology - Security techniques Digital 

/ ISO/IEC 9796-3(2000) signature schemes giving message recovery - Part 3: 

Discrete logarithm based mechanisms 


PRODUCT 4 


OTHERS 8 

TOTAL : 13 



LITD 18 E-Governance 

SCOPE - To prepare Indian standards on E-Governance 



Date Amd. 

1 DOC.LITD 18(0) Indian Standads on E-Governance (To be prepared) 




LITD 19 E-Learning 

SCOPE - To prepare Indian Standards on E-Learning 


Date Amd. 


1 DOC.LITD 19(0) Indian Standard on E-Learning (To be prepared) 




LITD 20 Indian Language Technologies and Products 

SCOPE - 


ISO/IEC/JTC1/SC2 Coded character sets. 



Date Amd. 

1 IS 10315:1997 7 bit coded character set for information interchange Jan 2004 

/ ISO/IEC 60646:1991 (first revision) 

2 IS 10401:1998 8-Bit coded character set for information interchange Jan 2004 

/ ISO/IEC 4873:1991 (first revision) 

3 IS 11203:1985 Coding of machine readale characters (MICR and OCR) Jan 2004 

/ ISO 2033(1983) for information processing 

4 IS 11407:1986 Implementation of the 7-bit coded character set and its Jan 2004 

/ ISO 0962-1974 7-bit and 8-bit extension 9 track 12.7 mm magnetic tape 

5 IS 12326:2005 7-bit and 8-bit coded character sets - code extension Feb 2003 

/ ISO 2022(1994) techniques 

6 IS 12877:1989 Implementation of the 7-bit coded character sets and its Feb 2003 

/ ISO 3275-1974 7-bit and extensions on 3.81 mm magnetic tape 

cassette for data interchange 

7 IS 13194:1991 Indian script code for information interchange - ISCII Jan 2004 


OTHERS 7 

TOTAL : 7 



LITD 21 E-Business Infrastructure 

SCOPE - To prepare Indian Standards on E-Business Infrastructure 



Date Amd. 

1 DOC.LITD 21(0) Indian Standards on E-Business Infrastructure ( To be 

prpepared) 




Sl. No. Committe No. IS No./ DOC Number 

ANNEX A 

STANDARDS WITHDRAWN / SUPERSEDED 

Title 

1 1 IS 589:1961 Basic climatic and mechanical durability tests for 

components for electronic and electrical equipment (revised) 

(superseded by IS 9000) 

2 8 IS 591:1964 Mains transformers for electronic equipment (revised) 

[superseded by IS 6297(Part 2)] 

3 8 IS 592:1954 Audio output transformers for radio receivers, amplifiers, 

small transmitters and similar other purposes (tentative) 

(withdrawn) [see IS 6297(Part 3)] 

4 20 IS 614:2000 Methods of measurements on receivers for amplitude 

modulation broadcast transmission (revised)[superseded by 

IS 12193(Part 1)and (Part 2)] 

5 20 IS 705:1955 Dry bettery operated community radio receivers (withdrawn) 

6 20 IS 706:1955 AC Mains-operated community radio receivers [superseded 

by IS 3397] 

7 5 IS 825:1956 Colour code for fixed resistors (superseded by 8186) 

8 5 IS 1031:1967 Methods of measurements on loudspeakers and 

loudspeaker systems (first revision) [superseded by IS 

7741(Part 1)] 

9 5 IS 1032:1957 General requirements and tests for pressure unit operated 

horn loudspeaker systems [superseded by IS 7741(Part 3)] 

10 5 IS 1033:1957 General requirement and tests for direct radiator moving coil 

loudspeaker (superseded by IS 7741(Part 2] 

11 5 IS 1034:1957 Loudspeakers systems for community radio receivers 


12 20 IS 1036:1957 6-Volts accumulator operated community radio receivers 

(withdrawn)(see IS:3397) 

13 8 IS 1037:1957 General purpose low frequency chokes (withdrawn)[see 

IS:6297(Part 3)] 

14 5 IS 1176:1977 Dimensions for aerial rods and slabs made of ferrimagnetic 

materials (first revision) 

15 5 IS 1301:1958 Code of safety requirements for electronic mains-operated 

audio amplifiers (incorporated in IS 616) 

16 5 IS 1302:1958 Methods of measurements on audio amplifiers (incorporated 

in IS 9302(Part 2)] 

17 5 IS 1490:1959 Recommendations for minimum performance requirements 

of mains-operated public address amplifiers (incorporated in 

IS 10426] 

18 8 IS 1512:1969 Tests and general requirements for IF transformers and RF 

coils (first revision)(withdrawn) [See IS:10230(Part 1)-1983] 

19 5 IS 1819:1961 Recommendations for general requirements of public 

address amplifiers (with Amendments No. 1 and 2) 

(superseded by IS 10426] 

20 5 IS 1885(Part 3/Sec Electrotechnical vocabulary: Part 3 Acoustics, Sec 3 Sound 

3):1967 recording and reproduction [superseded by IS 1885(Part 

48/Sec 1 and Sec 2)]


Title 

21 5 IS 1885(Part 5):1965 Electrotechnical vocabulary: Part 5 Quartz crystals 

(withdrawn) [see IS 1885(Part 44)] 

22 19 IS 1885(Part 13/Sec Electrotechnical vocabulary: Part 13 Telecommunication 

1):1968 transmission lines and waveguides, sec 1 General 

transmission lines [Superseded by IS:1885(Pt 56):1981] 

23 19 IS 1885(Part 13/Sec Electrotechnical vocabulary : Part 13 Telecommunication 

2):1967 transmission lines and waveguides, Sec 2 Microwave 

transmission lines and waveguides [Superseded by 

IS:1885(Pt 56):1981] 

24 5 IS 1885(Part 33):1972 Electrotechnical vocabulary: Part 33 Piezo-electric filters 

(withdrawn) [see IS1885(Part 44)] 

25 14 IS 1885(Part 52/Sec Electrotechnical vocabulary Part 52 Data Processing, Sec 1 

1):1980 Fundamental terms(withdrawn) 

26 14 IS 1885(Part 52/Sec Electrotechnical Vocabulary: Part 52 Data processing, Sec 

4):1980 4 Organization of data(withdrawn) 

27 14 IS 1885(Part 52/Sec Electrotechnical Vocabulary:Part 52 Data processing, Sec 5 

5):1980 Representation of data(withdrawn) 

28 14 IS 1885(Part 52/Sec Electrotechnical Vocabulary: Part 52 Data processing, Sec 

6):1980 6 Preparation and handling of data(withdrawn) 

29 14 IS 1885(Part 52/Sec Electrotechnical vocabulary: Part 52 Data processing, Sec 

12):1980 12 Information theory(withdrawn) 

30 9 IS 1885(Part 64/Sec Electrotechnical vocabulary: Part 64 Electromagnetic 

1):1987 compatibility, Sec 1 General terms [Superseded by IS 

1885(Part 85):2003] 

31 9 IS 1885(Part 64/Sec Electrotechnical vocabulary: Part 64 Electromagnetic 

2):1987 compatibility, Sec 2 Specific terms [Superseded by IS 

1885(Part 85):2003] 

32 17 IS 1885(Part 83):1999 Electrotechnical Vocabulary: Part 83 Year 2000 

33 15 IS 1980:1967 Ceramic dielectric capacitors, Type 1 (first revision) 


34 1 IS 2106(Part 1):1962 Environmental tests for electronic and electrical equipment: 

Part 1 General [superseded by IS 9000(Part 1)] 


Part 2 Damp heat (cycling) test (withdrawn) [superseded by 

IS 9000(Part 5/Sec 1 & 2)] 


Part 3 Cold test [superseded by IS 9000(Part II/Sec 1 to 4)] 


Part 4 Dry heat test [superseded by IS 9000(Part 3/Sec 1 to 

5)] 


Part 5 Low air pressure test (withdrawn) [superseded by IS 

9000(Part 13)] 


Part 6 Rapid change of temperature [superseded by IS 

9000(Part 14)] 


Part 7 Bump test (with Amendment No. 1) (withdrawn) 

[superseded by IS 9000(Part 7/Sec 2)]


Title 


Part 8 Impact or shock test (with Amendment No. 1) 

(withdrawn) [superseded by IS 9000(Part 7/Sec 1)] 


Part 9 Drop test (with Amendment No. 1(withdrawn) 

[superseded by IS 9000(Part 7/Sec 3)] 

43 1 IS 2106(Part 10):1965 Environmental tests for electronic and electrical equipment 

Part 10 Water immersion test (with Amendment No. 1) 

(withdrawn)[(superseded by IS 9000(Part 15/Sec 1-9)] 


Part 11 Water sspray test (with Amendment No. 1) 



Part 12 Dust test (withdrawn) [superseded by IS 9000(Part 

12)] 


Part 13 Mould growth test [superseded by IS 9000(Part 10)] 


Part 14 Constant acceleration test [superseded by IS 

9000(Part 9)] 


Part 15 Gas-tightnes test (with Amendment No. 1) 

(withdrawn) [superseded by IS 9000(Part 15/Sec 1-9)] 


Part 16 Vibration test (withdrawn) [superseded by IS 

9000(Part 8)] 


Part 17 Stimulatedsolar radiation at ground level (with 

Amendment No. 1 & 2) (superseded by IS 9000(Part 17/Sec 

1)] 


Part 18 Salt mist test (with Amendment No. 1) [superseded 

by IS 9000(Part 11)] 

52 2 IS 2612:1965 Recommendation for type approval and sampling procedures 

for electronic components (superseded by IS 10673-1983) 

53 4 IS 2684(Part 1):1972 Dimensions of electron tubes: Part 1 Miniature '9-pin noval 

type' (first revision) (Withdrawn) 

54 4 IS 2684(Part 2):1972 Dimensions of electron tubes: Part 2 Miniature '7-pin type' 

(first revision) (Withdrawn) 

55 4 IS 2684(Part 3):1971 Dimensions of electron tubes: Part 3 Octal base type 

(Withdrawn) 

56 4 IS 2684(Part 4):1971 Dimensions of electron tubes: Part 4 Magnoval base type 

(Withdrawn) 

57 4 IS 2684(Part 5):1972 Dimensions of electron tubes: Part 5 Loctal base type 

(Withdrawn) 

58 20 IS 2731:1964 Methods of measurements on receivers for frequency 

modulation broadcast transmission


Title 

59 5 IS 2748:1964 Methods of measurements on microphones [superseded by 

IS 9302(Part 3) 

60 5 IS 2902:1964 Fixed carbon film resistors, Type 1 (superseded by IS:5786 

series) 

61 5 IS 2903:1964 Fixed carbon film resistors, Type 2 (superseded by IS:5786 

series) 

62 5 IS 2916(Part 1):1969 Quartz crystal units used in oscillators: Part 1 General 

requirements and tests[superseded by IS 8271(Part 1)] 

63 5 IS 2916(Part 2):1972 Quartz crystal units used in oscillators: Type AA-01 

(withdrawn) [superseded byIS 8271(Part 2/Sec 1)] 



65 5 IS 2916(Part 4):1972 Quartz crystal units used in oscillators : Type AA-03 

(withdrawn) [superseded by IS 8271(Part 2/Sec 3)] 









70 5 IS 2916(Part 9):1976 Quartz crystal units used in oscillators: Part 9 Type AA-08 

(withdrawn) 



72 5 IS 2934(Part 1):1964 Non-wire-wound variable resistors (potentiometers), Type 2: 

Part 1 Tests and general requirements [superseded by IS 

8872(Part 1)] 

73 8 IS 3289:1965 Tests and general requirements for audio frequency 

transformers and chokes [superseded by IS 6297(Part 3)] 

74 3 IS 3354(Part 1):1965 Valve Sockets:Part 1 General requirements and tests 

(withdrawn) 

75 3 IS 3354(Part 2):1965 Valve sockets:Part 2 Dimensions and construction of 

gauges and tools (withdrawn) 

76 3 IS 3354(Part 3):1965 Valve sockets: Part 3 Valve sockets for octal base 

(withdrawn) 

77 3 IS 3354(Part 4):1965 Valve sockets: Part 4 Valve sockets for 9-pin miniature 

base (withdrawn) 

78 5 IS 3373(Part 1):1965 Wirewound resistors, type II: Part 1 Tests and general 

requirements (supersededby IS:8909 series) 

79 5 IS 3373(Part 2):1966 Wirewound resistors, type II: Part 2 Vitreous enamelled 

(superseded by IS:8909 series) 

80 5 IS 3641:1976 Methods of measurements on hearing aids (first revision) 


81 10 IS 3700(Part 1):1972 Essential ratings and characteristics of semiconductor 

devices: Part 1 General (first revision) 


devices: Part 2 Low power signal diodes (first revision)


Title 


devices: Part 3 Rectifier diodes (first revision) 


devices: Part 4 Low power small signal transistors 


devices: Part 5 Power transistors 


devices: Part 6 Switching transistors 


devices:Part 8 Voltage regulator and voltage reference diode 


devices:Part 9 Variablecapacitance diodes 


devices:Part 10 Field effect transistors 

90 10 IS 3715(Part 1):1971 Letter symbols for semiconductor devices: Part 1 General 

aspects (first revision) 

91 10 IS 3715(Part 2):1971 Letter symbols for semiconductor devices: Part 2 Diodes 


92 10 IS 3715(Part 3):1971 Letter symbols for semiconductor devices: Part 3 

Transistors (first revision) 

93 16 IS 3826(Part 1):1966 Connectors for frequencies below 3 MHz: Part 1 General 

requirements and tests [superseded by IS 9647] 

94 5 IS 3931:1966 Sound level meters for the measurement of noise emitted by 

motor vehicles (incorporated in IS 9779) 

95 5 IS 3932:1966 Sound level meters for general purpose use (incorporated in 

IS 9779) 

96 8 IS 4002:1967 General requirements and tests for audio frequency 

transformers and chokes usedin transistorized equipment 


97 4 IS 4096:1973 Methods of measurement of optical focal spot size of X-ray 

tubes (first revision) 

98 5 IS 4114:1967 Coded markings of values of capacitance and resistance by 

letters and digits [superseded by IS 8186] 

99 10 IS 4400(Part 1):1967 Methods of measurements on semiconductor devices: Part 

1 General 


2 Low power signal diodes 


3 Rectifier diodes 


4 Transistors 


8 Voltage regulator and voltage reference diodes 

104 10 IS 4400(Part 9/Sec Methods of measurements on semiconductor devices: Part 

1):1974 9 Variables capacitance diodes, Sec 1 For operating 

frequencies below 300 MHz 

105 10 IS 4400(Part 9/Sec Methods of measurements on semiconductor devices: Part 

2):1974 9 Variables capacitance diodes,Sec 2 For operation at 

frequencies above 6 MHz


Title 


10 Field effect transistors 

107 5 IS 4406:1967 General requirements for hearing aids [superseded by IS 

10775-1984] 

108 5 IS 4482:1967 Hearing aids (superseded by IS 10775) 

109 6 IS 4493(Part 5):1982 Hollow metallic waveguides:Part 5 Rigid rectangular 

waveguides with circular outside cross-section 

110 7 IS 4545(Part 10):1990 Methods of measurement on receivers for television 

broadcast transmissions : Part 10 Electrical measurement 

on multichannel sound television receivers using the two 

carriers system 

111 20 IS 4546:1983 Methods of measurement of radiated and conducted 

interference from receivers for amplitude modulation, 

frequency modulation and television broadcast transmission 


112 10 IS 5000(Part 0B2):1969 Base outline OB2 (reaffirmed 1978) (withdrawn) 

113 10 IS 5000(Part 0B3):1969 Base outline OB3 (reaffirmed 1978) (withdrawn) 

114 10 IS 5000(Part 0B7):1969 Dimensions of semiconductor devices: Base outline 0B 7 

115 10 IS 5000(Part 0C2):1969 Case outline OC2 (reaffirmed 1983) (withdrawn) 

116 10 IS 5000(Part B01):1969 Dimensions of semiconductor devices: Base outline 0B 1 

117 10 IS 5000(Part B04):1969 Dimensions of semiconductor devices : Base outline 0B 4 



120 10 IS 5000(Part C01):1969 Dimensions of semiconductor devices: Case outline 0C 1 

121 10 IS 5000(Part C03):1969 Dimensions of semiconductor devices: Case outline OC 3 

122 10 IS 5000(Part C04):1969 Dimensions of semiconductor devices: Case outline OC 4 

123 10 IS 5000(Part C05):1969 Dimensions of semiconductor devices: Case outline 0C 5 

124 10 IS 5000(Part D 3):1969 Device Outline OD3 (with Amendment No. 1) (reaffirmed 

1978) (withdrawn) 

125 10 IS 5000(Part D0/Sec Dimensions of semiconductor devices: Device outline 0D 22 

22):1978 

126 10 IS 5000(Part D0/Sec Dimensions of semiconductor devices: Device outline OD 24 

24):1979 

127 10 IS 5000(Part D0/Sec Dimensions of semiconductor devices: Device outline 0D 30 

30):1981 

128 5 IS 5000(OD 2):1969 Dimensions of semiconductor devices: Device outline 0D 2 

129 15 IS 5361:1969 Polyester film dielectric capacitors for direct current 

(withdrawn) [supersededby IS 9638(Part 1)] 

130 6 IS 5608(Part 3):1976 LF wires and cables with PVC insulation and PVC sheath: 

Part 3 Equipment wires and cables, screened 

131 5 IS 5786(Part 2):1982 Fixed resistors general purpose low power: Part 2 Resistors 

Type FRLP - 1 (first revision) 

132 5 IS 5786(Part 8):1982 Fixed resistors general purpose low power: Part 8 Resistors 

Type FRLP - 7 (first revision) 

133 5 IS 5786(Part 9):1976 Fixed resistors general purpose, low power: Part 9 Resistors 

type FRLP 8 (withdrawn)


Title 

134 5 IS 5786(Part 11):1969 Fixed resistors general purpose, low power: Part 11 Type 

FRLP 10 (withdrawn) 

135 5 IS 6098:1971 Methods of measurement of airborne noise emitted by 

rotating electrical machinery 

136 4 IS 6134(Part 1/Sec Methods of measurements of electrical characteristics of 

1):1973 microwave tubes: Part 1 General measurements, Sec 1 

General conditions and precautions for 

measurements[incorporated in IS 6134(Part 1)] 

137 4 IS 6134(Part 1/Sec Methods of measurement on microwave tubes: Part 1 

2):1973 General measurement, Sec 2 Common to all devices 

[incorporated in IS 6134(Part 1)] 

138 4 IS 6568:1972 Implosion protection for TV picture tubes (Withdrawn) 

139 4 IS 6576:1972 Methods of measurements on gas filled cold cathode 

indicator tubes (Withdrawn) 

140 4 IS 6577:1972 Methods of measurements on gas filled cold cathode voltage 

stabilizing and voltage reference tubes (Withdrawn) 

141 9 IS 6842:1997 Limits for electromagnetic Interference - Specification 

(Second Revision) 

142 9 IS 6872:1972 Radio interference measuring apparatus for the frequency 

range 0.15 MHz to 1000MHz (reaffirmed 1978) [Superseded 

by IS 10052(Part 1)] 

143 9 IS 6873(Part 6):1983 Limits and methods of measurements of Radio disturbance 

characteristics Part 6 From High voltage transmission 

systems 

144 20 IS 6970:1973 Code of practice for protection against possible hazards in 

radio transmitting equipment (Superseded by IS 10437) 

145 1 IS 7025:1973 Guidance on solar radiation testing [redesignated as IS 

9001(Part 11)] 

146 5 IS 7431(Part 1):1974 Tests for magnetic properties of ferrite aerial rods: Part 1 For 

long and medium wave receptions (superseded by IS 9946- 

1981) 

147 5 IS 7431(Part 2):1976 Tests for magnetic properties of ferrite aerial rods: Part 2 For 

short wave reception (superseded by IS 9946-1981) 

148 10 IS 7441(Part 1):1974 Essential ratings and characteristics of digital integrated 

circuits: Part 1 General format 

149 5 IS 7489:1974 Dimensions of cross-cores (X-Cores) made of ferromagnetic 

oxides and associatedpots 

150 3 IS 7542(Part 1):1974 Tube Shield : Part 1 General requirements and tests 

(withdrawn) 

151 7 IS 7717:1974 General requirements and tests for magnetic cores for 

application in coincidentcurrent matrix stores having a 

nominal selection ratio of 2:1 and in linear select memory 

stores 

152 5 IS 7741(Part 1):1975 Loudspeakers: Part 1 General requirements and tests 

(Superseding IS:1031(1967) 

153 7 IS 7741(Part 4):1977 Specification for loudspeakers: Part 4 Loudspeakers for 

community radio receivers (superseding IS 1034:1975) 

154 1 IS 7805:1975 Guidance on mould growth testing (with Amendment No. 1) 

[redesignated as IS 9001(Part 10)]


Title 

155 1 IS 8145:1976 Test chambers of non-injection type for constant relative 

humidity [superseded by IS 9000(Part 6)] 

156 4 IS 8319(Part 1):1977 Dimensions of indicator tubes: Part 1 Tube type 1 

(Withdrawn) 


(Withdrawn) 

158 4 IS 8319(Part 3):1977 Dimensions of indicator tubes: Part 3 Tybe type 3 

(Withdrawn) 


(Withdrawn) 

160 1 IS 8456:1977 Guidance on method of mounting of electronic and electrical 

items for dynamic tests (with Amendment No. 1) 

[redesignated as IS 9001(Part 12)] 

161 5 IS 8899:1978 Guide for the use of synthetic quartz crystal 

162 7 IS 9302(Part 1):1979 Characteristics and methods of measurements for sound 

system equipment: Part 1 General 


system equipment: Part 2 Amplifiers (superseding IS 

1302:1958) 


systems equipment: Part 4 Loudspeaker [superseding IS 

7741(Part 1):1975] 


system equipment: Part 6 Headphones and head sets 


system equipment: Part 10 Preferred matching values for 

the interconnection of sound system components 

167 4 IS 9383(Part 1):1979 Dimensions of sign indicator tubes: Part 1 Tube type 1 

(Withdrawn) 

168 4 IS 9383(Part 2):1979 Dimensions of sign indicator tubes: Part 2 Tubes type 2 

(Withdrawn) 

169 7 IS 9551(Part 8):1992 Specification for high-fidelity audio equipment and systems: 

part 8 FM radio tuner 

170 9 IS 9615:1980 Guide on General Aspects of electromagnetic interference 

suppression 

171 5 IS 9709:1980 Synthetic quartz single crystal 

172 5 IS 9779:1981 Sound level meters (superseding IS 3931:1966 and IS 

3932:1966) 

173 20 IS 9870:1993 Informative guide for subjective tests on TV receivers (first 

revision) 

174 9 IS 10052(Part 3):1983 Specification for electromagnetic interference measuring 

apparatus and measuring methods: Part 3 Radiation 

measurement of electromagnetic interference 


apparatus and measuring methods: Part 4 Interference 

measuring apparatus having detectors other than Quasipeak


Title 


apparatus and measuringmethods: Part 5 Statistical 

considerations in the determination of limits of 

electromagnetic interference 

177 9 IS 10052(Part 6):1992 Electromagnetic Interference measuring apparatus and 

measurement methods: Part 6 Measurement of the shielding 

efficiency of the coaxial cables having one or two braids in 

the metric wavelength range 

178 9 IS 10052(Part 7):1993 Electromagnetic interference measuring apparatus and 

measuring methods:Part 7 Audio frequency interference 

measurement 

179 5 IS 10184:1982 Lumbered synthetic quartz crystal 

180 16 IS 10422:1982 Requirement and test methods for safety of data processing 

equipment 

181 20 IS 10425(Part 1):1983 Multichannel TV tuners: Part 1 Electromechanical (turret 

type) tuners 

182 20 IS 10425(Part 2):1985 Multichannel TV tuners: Part 2 Electronic tuners 

183 3 IS 10544(Part 1):1983 Specification for radio drive cords: Part 1 Braided Nylon, Silk 

core 

184 3 IS 10544(Part 2):1983 Specification for radio drive cords: Part 2 Woven Nylon, 

Glass core 

185 3 IS 10544(Part 3):1983 Specification for radio drive cords: Part 3 Braided polyester, 

Nylon core 

186 16 IS 10690:1983 Specification for unpunched paper cards used for information 

processing 

187 14 IS 10756:1983 Flow chart symbols and conventions for use in data 

processing (withdrawn) 

188 16 IS 10997:1984 Specification for unpunched paper tape for information 

interchange 

189 14 IS 11257:1986 Programming languages - Minimal BASIC 

190 14 IS 11290:1985 Code of practice for documentation of computer based 

systems (withdrawn) 

191 14 IS 11366:1985 Representation of SI and other units in systems with limited 

character sets forinformation processing 

192 16 IS 11412:1986 Key-board for information processing using 7-bit coded 

character set 

193 14 IS 11415:1986 Basic mode control procedures for code independent 

information transfer 

194 14 IS 11417:1986 Basic mode control procedure for conversational information 

message transfer 

195 8 IS 11867:1987 Portable X or gamme radiation exposure rate meters and 

monitors for use in radiological protection (withdrawn) 

196 8 IS 11885:1987 Multichannel amplitude analyzers (withdrawn) 

197 8 IS 12638:1988 Test procedures for germanium gamma-ray detectors 

198 8 IS 12639:1988 Test procedures for germanium detectors for X and gamma 

radiation 

199 9 IS 12708:1988 Measurement of the immunity of sound and television 

broadcast receivers and associated equipment from radiosources 

operating in the frequency range 1.5 MHz to30 MHz 

by the current injection method


Title 

200 9 IS 13140(Part 1):1982 Distrurbances in suppply systems caused by household 

appliances and similar electrical equipment: Part 1 Definitions 

201 9 IS 13140(Part 3):1982 Disturbances in supply systems caused by household 

appliances and similar electrical equipment: Part 3 Voltage 

fluctuations 

202 9 IS 13149:1991 Flickermeter : Functional and design specifications 

203 14 IS 13556:1992 Database language NDL for information processing systems 

204 11 IS 13616(Part 3):2000 Fibre optic branching devices: Part 3 Sectional specification 

- One-to-N wavelength multiplexer/demultiplexer - Doc: LTD 

27(1508) Withdrawn Vide Note No. LTD 27/T-9 Dt. 95-06-21 

205 17 IS 14357:2002 Information Technology - Code of Practice for Information 

Security Management (First revision )(Superseded by IS 

/ISO/IEC 17799:2005) 

206 17 IS 14755:1999 Recommended practice for Information technology year 2000 

test method 

207 17 IS 15150:2002 Information Security Management Systems- Requirement 

(Superseded by IS/ISO/IEC 27001:2005) 

208 10 IS 5000(Part Pt D3):1965 Device Outline OD3 (with Amendment No. 1)(withdrawn)

LITD - BIS

Create successful ePaper yourself

Delete template?

Save as template?